1 / 1
Nextruder nozzle wrench for Prusa MK4, Core One and XL — zdjęcie 1

Nextruder nozzle wrench for Prusa MK4, Core One and XL

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A robust wrench to easily cold swap Nextruder nozzles on the Prusa MK4, Core One and Prusa XL.

Ocena
4,962 / 5
Polubienia
1003
Pobrania
4903
Wydruki
243
Wyświetlenia
13 714
Oceny
212

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

On the Prusa MK4, nozzles can be cold swapped.

 

The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented.

 

After having cleaned your nozzle as documented (heat at 250 degrees for 5 minutes + use a brass brush), wait for the nozzle to cool down, manually unscrew the two big screws on the left, hold the heat block, and unscrew the nozzle to replace it.

 

This wrench perfectly fits the nozzle head and makes unscrewing the nozzle a breeze. 

 

A metal part is not required. The wrench is very robust and is not going to break.

 

Simple and quick to print. PLA is a perfect choice, as it's stiffer than PETG. Use 3 or 4 perimeters. Infill is not important. Print flat as in the file to maximize the strength.

 

Great video showing the tool in action, by Jiu Reviews:

Video

Tagi