1 / 1
Nextruder nozzle wrench for Prusa MK4, Core One and XL — image 1

Nextruder nozzle wrench for Prusa MK4, Core One and XL

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A robust wrench to easily cold swap Nextruder nozzles on the Prusa MK4, Core One and Prusa XL.

Rating
4.963 / 5
Likes
1,015
Downloads
4,940
Makes
245
Views
13,803
Reviews
214

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

On the Prusa MK4, nozzles can be cold swapped.

 

The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented.

 

After having cleaned your nozzle as documented (heat at 250 degrees for 5 minutes + use a brass brush), wait for the nozzle to cool down, manually unscrew the two big screws on the left, hold the heat block, and unscrew the nozzle to replace it.

 

This wrench perfectly fits the nozzle head and makes unscrewing the nozzle a breeze. 

 

A metal part is not required. The wrench is very robust and is not going to break.

 

Simple and quick to print. PLA is a perfect choice, as it's stiffer than PETG. Use 3 or 4 perimeters. Infill is not important. Print flat as in the file to maximize the strength.

 

Great video showing the tool in action, by Jiu Reviews:

Video

Tags