Liczymy pasujące modele…
With this mod, it is now possible to buy a whole Nextruder in pieces without the need for buying a MK3.9 Kit . This mod removes the need for the missing 'Pin 2.9x8.5', 'Tubular spacer 13.2x3.8x0.35', and the 'Spacer 6x3.1x8'. These are…
Like so many others, I find that the PTFE tubes often bend a bit much right as the enter the top of the Nextruder on my Prusa XL, and could benefit from a guide that. However, I wanted a part that was simpler to print/use than the only…
If your Nextruder heater stucked on block you can use this tool. Place heater block with this tool and hit the protrusion on the heater Then it will be loosen You can use hammer or screw driver CAUTION Please be careful with your hands!
This is the remix of nextruder nozzle tray from pachek, only with 3 holes.
As an owner of a Prusa 5T XL, I keep 5 of each nozzle type. I designed this case to keep all my nextruder nozzles organized in sets of 5. I peel the labels off the original cases and stick them onto my 5-packs. Check out my other Prusa XL…
Original description: On the Prusa MK4, nozzles can be cold swapped. The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented. After having cleaned your nozzle as documented…
Checkout my improved solution! Features No additional hardware needed A G2 pen and filament are all you need. Install and forget Flexibly switch between plotting and 3D printing without removal of the attachment. Tool free design Slide in…
This model allows you to hold up to two Nextruder assemblies on the Prusa Side Storage door. It could also hold just basic nozzles as well. It will press fit into your door, so no glue should be required. You can always slightly resize in…
Remix of jju182s poopholder to fit 10x3mm magnets (needs glue).
Me hacia falta la junta para adaptar mi core one con mmu3, y claramente no tenia esa tórica. Me la diseñé y la imprimí con flexible 60D, supongo que realmente se podría cualquier tipo de flexible. Recomiendo hacerlo a una altura de 0,15…
Since i love the CORE One modular side storage and i needed it for the CORE one L i made my own. The holes for INDX nozzles are currently untested but made from the original bondtech CAD drawings. For the left tools tray the box with the…
This is a remix of the Nextruder Nozzle Case Holder for Enclosure , redesigned to improve storage capacity, stability, and integration inside the Prusa enclosure. With this version, you can store up to 9 Nextruder nozzles directly in…
Made for Multipoint Rails, but Fix Points can also be used
Other versions of this tool exist, but I wanted to try designing a model in Fusion.
This is a simple holder for Nextruder Nozzles on the HSW. It fits five nozzles in their cases. Print as oriented in the STL, any nozzle size and layer height will work. You will need a bit of support at the bottom of the hex connector.
Replace the PC4-M10 fitting with this printed part for direct filament feeding. I recommend printing this in PETG ; I had to adjust for shrinkage with my specific brand, so you might want to print a few test pieces first. My version was…
With this mod, it is now possible to buy a whole Nextruder in pieces without the need for buying a MK3.9 Kit . This mod removes the need for the missing 'Pin 2.9x8.5', 'Tubular spacer 13.2x3.8x0.35', and the 'Spacer 6x3.1x8'. These are…
Es gibt verschiedene Ideen das Extruder Kabel und den PTFE Schlauch zu führen. Ich weiß es ist nicht wirklich notwendig aber es sieht schöner aus. Was mich bei den verschiedenen Modellen störte war die Montage, also habe ich versucht eine…
Update 4/3/2026 - Created a totally new version that extends the entire length equal to the original extender, all in one part. Also, thickened the body. Modified the 66mm version to lengthen the threads to make it compatible with…
Abdeckung für die Kabel links vom Lüfter am Nextruder
Greatly enjoyed the Revo nozzle rugged case by S2 Engineering and the remix by Beradino, but wanted to improve some of the ergonomics on the nozzle slotting and removal as well as change the text to be horizontal like on the original revo…
For all the nozzles you will never need nor use! Use the boxes as lid, use the lid as lid, or just let them go dusty! Available parts: •Lid •Nozzle Boxes •Extra Storage Box You will need 4x2mm magnets , lots of them! (Very cheap on…
Seeing that the Core One L has the accelerometer in the tool head love board, it seemed that an alternative position could work (as well as this is true with Bambu machines) Seeing the limited space of the MK4s nextruder by the nozzle, I…
Magnetic case for storing and protecting spare Nextruder nozzles. I recommend attaching it to the Core One (or any other printer) frame for clean organization. There is also a version without the hinged lid, for anyone that prefers it…
Practical and useful support for the Nextruder nozzle and the various accessories of your Prusa XL and MK4 printer that I created for my version of the excellent Honeycomb storage wall by RostaP | Download free STL model | Printables.com…
This wallmounted Holder holds your Nextruder Hotends (with Silikonsock). If demanded i will upload a Version without the Silikonsock
As I wanted a nextruder nozzle box with just 3 nozzles, I recreated the popular “Yet another Nextruder Nozzle Box” in openSCAD with a slightly different opening mechanism and a variable number of nozzles. It uses the same inlets as in…
SKÅDIS 5×3 Nextruder Nozzle Holder – 3D Printable This 3D‑printed IKEA SKÅDIS holder is designed to store and organize up to 15 Prusa Nextruder nozzles in a compact and easily accessible layout. Each nozzle slot keeps tips separated,…
Completely transparent cover for Nextruder. It does not use the plastic ring. After more than three month testing is working without issues. Use clear PETG filament or stronger. I have used a resin printer (first picture) and clear PCTG…
I designed this for my Nextruder spare Nozzles which came without an own box. The box is designed to be printed in Vase and the cap is a snug fit. I printed the box with colorFabb Natural PLA, as it was the most transparent material I had…
This is a stackable box for the nextruder assemblies. You can print the outer and insert multiple times and stack them with the lid on top or just make one box with a lid. The lid also doubles as a storage tray for parts.
If you have a small print farm with nextruder printers and you use different hotends for swapping to be flexible in printing your projects, this might be handy for you. Itis a magnetic hotend rack for 10 Nextruder hotends and tools.…
This remixes this otherwise great main plate remix, to make filament insertion easier. My filament would get “stuck” past the filament sensor, making insertions harder (and requiring me to remove the PFTE tube at the nextruder, pull a bit…
I've remixed the original cap to make the inside a bit smaller, so it can fit into my vase-mode printed case. Taken from here: https://www.printables.com/cs/model/893016-nextruder-nozzle-case-other-thicknesses
Nozzle quick change adjusted for the height difference of the ObX nozzles and added the space for the sock.
Nextruder Nozzle Holder with box, up to 7 Nozzles MK4_Nextruder_Nozzle_Holder_v2.obj: The column in the middle is ~10mm higher
Added cutout on the left side to align cover with cable channel on Nextruder body.
Remix of the Nextruder nozzle insert for the Prusa (Tools) Rugged Boxes . It accommodates two Nextruder nozzles and eight V6 nozzles. The design is as close as possible to the original inserts. Printing: I recommend the same settings as…
Like so many others, I find that the PTFE tubes often bend a bit much right as the enter the top of the Nextruder on my Prusa XL, and could benefit from a guide that. However, I wanted a part that was simpler to print/use than the only…
Snap in multiboard storage solution for Nextruder hotends.
If your Nextruder heater stucked on block you can use this tool. Place heater block with this tool and hit the protrusion on the heater Then it will be loosen You can use hammer or screw driver CAUTION Please be careful with your hands!
The new cooling duct on the MK4S makes it very difficult to remove the silicone sock, since access to the top of the heat block is obstructed. This simple tool is designed to hook the silicone sock, so it can be pulled downward and…
Another Nextruder Nozzlebox: Individually configurable as a 3 or 6 Nozzlebox. Various combinations and colors are possible. Flat and neutral design. The nozzles are very easy to remove, by simply pressing on them with your finger. The…
Didn't quite like any other nozzle boxes, so I made my own. Key features Fits one fully assembled Nextruder lying flat, with or without the silicone sock Alternatively, fits two original Nextruder nozzle containers Fits up to 15 V6…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This mod adds numbered planetary gear covers for your Prusa XL Nextruders. You can preview them in a web browser or in AR on a phone/tablet/headset here . When you change the covers remember to swap the spacer ring from the…
Nextruder nozzle adapter for Prusa Mini+ Delivery from CW2 2025 -Suitable for PRUSA Nextruder nozzles -in 5 different colors -Including pressure part - Solderless conversion thanks to cable set - Made in Germany - Anodized aluminum…
This is a tool to check for collisions when setting up sequential printing. The model is added to the print area and disabled from printing. By moving it, it is verified that the NEXTRUDER MK4S or X stripes do not collide with already…
Use this to find out the maximum flow rate of your hotend to print faster. The test was created with the help of this website: https://hotend-flow-tester.netlify.app Thanks also to @CNCKitchen Here you will find further information and…
This is the remix of nextruder nozzle tray from pachek, only with 3 holes.
This box gives storage for seven fully assembled Nextruders (incl. nozzle,,heat pill", thermistor, heatblock, silicone sock). I liked the idea of @dteng and modified it to my needs. I extended it to fit onto the top edge of the O riginal…
This is a family of six Gridfinity bins to store Prusa Nextruder nozzles. There are three basic styles – 3 nozzle flat storage, 6 nozzle flat storage, and 3 nozzle tilted display, and each has a variant with or without finger cutouts on…
The stem on the PC4-M5 festo fitting is quite short and I have had trouble with filamant getting caught on exposed threads during loading. To eliminate this source of MMU failures, I've made a replacement with a longer stem to ensure the…
This case can be used to hold your nextruder nozzles and printer spares. There are two versions, One is made for the normal nextruder that can be used for any printer. The second version has a place for the calibration pin that is used in…
Remix of W Hudson's box, nozzle area scaled up 15% to more comfortably accommodate the Prusa High Flow Nozzles Get the Nextruder Lid.stl (not Sock) from the original:…
If the two loosely connected idler-swivel halves bother you, this modification is for you. The original mechanism is brilliantly designed and I don't intend to change that - my modification only improves the connection between the…
Nozzle holder for IKEA Skadis board - for 5 pieces of E3D nozzles (i use them in MK4 and XL printer). 2 hooks needed to attach it to Skadis board - same as all my other models. Easy snap-in - both hooks and holder. Regarding the sign -…
This skadis holder for nextruder nozzles can hold up to 6 nozzles cases. It can be printed without support, but some can be added under the bridging of the part.
Got too much hotend, V6 noozle, Prusa, oBXidian etc... and this is a nightmare to find them easily, so i decided to create a tag plate to fit on the hotend so you can easily find them. Morover you can clip it on the PTFE when using it, so…
I have remixed the original model to be able to use my designed PTFE tube holder for the Prusa MK4 and my BB Filament spool holder. The hole on top is designed for the use of a ID2 OD3 PTFE tube. Thicker PTFE tube would interfere too much…
made it fit for the black ptfe couplers prusa is using lately fits both blue and black couplers
Die Box ist in ihren Außenabmessungen kompatibel mit dem EuroPlus System In Programm OpenSCAD kann man (im Fenster Customizer) sehr einfach den Text am Deckel ändern. Hinweis: Das Durchmesserzeichen ist in den Textfeldern nicht änderbar.…
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Have you ever created a custom nextruder cover but wished it had the original art or something similar? Well I have created a simple cover add-on which simply glues in place. It is not perfect but it is very close to the original. This…
This PTFE Tube holder makes feeding filament from next to the printer much easier By holding the PTFE tube in place on top the Nextruder. Fastened by the tension screws. The front plate of the part is modifiable (STEP file included) to…
Inlay für Nextruder Nozzle Box mit Nozzle Adapter Plätzen
Holder for nextruder nozzle cases and nozzles. You need round magnets 6x3mm (or smaller) Set on the slicer a printing pause and insert magents on the right time (about last 8 layers).
Liked the internal nozzle holder, but it was too big to fit in my other container with other spares. Simple minimal design to hold nozzles, nextruder, and heat block. And some room in the middle for anything else. Nozzle tips are about…
A remix of Zenmaster33's holder - I wanted to only have the containers on the Skadis - only made/put together with PrusaSlicer. I have placed small studs under the hook part that has to be cut off after the print - I disliked how the hook…
Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source of problem. On the other hand, when the…
1x1 bin for gridfinity to hold your precious nexruder nozzle
If your extruder keeps stopping mid print and seems to magically start again after docked, most likely the cable is coming loose. Over time, the cable connector will slowly back out of the dwarf-cover-base and put strain on the white plug…
I like this nozzle holder and printed Chris D's remix for seven nozzles. For the labels, I did not want to go with the text feature in the slicer since it felt too cumbersome and hard to get rerepeatable results. So I wrote a quick…
CORE ONE / MK4/MK4S Nextruder Visualizer adaptor; one modified part, one new part and some other trinkets. PG Case was modified; added center hole. Added shaft to engage on the screws between the planetary gears; made for 8mm dia x 2.5 mm…
This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…
I printed with PETG, a 0.4 nozzle, 100% infill and 0.25 layer height
MK4 nozzle thumbscrews have been known to loosen on their own. My printer has experienced this phenomenon. This design hopes to lock them in place so that can’t happen. Before you install, have a look at your fan wire routing to ensure…
little box for nozzles, optimized for Prusa MK4 (or others with that system...) additionally needed: 2x 8mm hinge (like picture, see aliexpress or https://www.aliexpress.com/item/32489771872.html or…
I wanted to store my different Nextruder sizes in my Ikea Alex drawer but upright they are too tall so I tilted the case a bit. To fit the spare containers and caps, I've created the corresponding gridfinity holders. The containers and…
This nozzle container fits brass and Obxidian standard flow nozzles, and brass and Obxidian High Flow nozzles as of December 2024. I printed them using PLA on a Prusa MK3S+ using Hatchbox PLA MAX, a 0.4mm nozzle, factory hot-end, and…
Simple nozzle rack for 5 Nextruder nozzles. Designed for cabinet door or wall mount with double sided tape or with screws. Removable labels slide in the front of the rack and a blank label is included in case to add text within the slicer…
Just a simple adapter to attach a PTFE tube to a Prusa Nextruder. Didn't want to order anything extra for this fitting. So I created and printed this adapter. Works perfectly. Maybe the hole needs to be drilled out a bit so that the…
Keep Your Nozzles Organized with Style! 🌟 Discover my ingenious design for your Prusa printer equipped with the Nextruder! This sleek holder stores your nozzles in their original boxes, while also categorizing them by diameter with clear…
Nozzle Box for nextruder nozzles. Print instructions: Layerheight: 0.15mm or 0.2mm Infillpattern: Gyroid Wallgenerator: Standard I printed the Box and the lid on a textured sheet and the insets on the cool sheet for the adhesion otherwise…
A stylish, compact, and sturdy tool for quick Nextruder nozzle swaps. Featured pictures are printed in PCCF. I've provided a few models: 20mm tool height - with and without holes for hex key 25mm tool height - with and without holes for…
This is a case that's interchangeable with the case on new Nextruder nozzles. I ordered a hardened high flow 0.4 nozzle so the stock nozzle needed a new home. The OpenSCAD file uses some of my “library modules” so which I update all the…
Useful little container with screwable cap holding up to 3 nextruder nozzles. They are labels reading: .25 .40 .60 to distinguish them → other labels or sizes uppon request :)
Remix of sblomfield's Nextruder Nozzle Box - Mint Tin Insert. I have included the Fusion 360 file in case anyone wants to adjust it further.
Used the following for inspiration: Nextruder Nozzle Box Mini https://www.printables.com/model/563637-nextruder-nozzle-box-mini Nozzle Holder https://www.printables.com/model/1128998-nozzle-holder Ultimate Box Generator…
moves cable, ptfe, nylon strip closer together for more compact footprint.
Printed with a 0.4mm nozzle with a layer height of 0.2 in PETG (its flexibility is better to fit the nozzles without breaking the sockets). Once printed, you have to move the different fins to improve movements. The file in Freecad format…
If you find your nozzle storage becoming cluttered or stored in individual baggies, a dedicated organizer can help keep things tidy. While searching on Printables for a suitable solution, I found several designs that provided inspiration,…
There are two versions, one that limits z height and one that doesn't. I'd suggest the one that doesn't. Nozzle holder for Nextruder nozzles. Fits on the top of the printer frame. Holds 4 nozzles and has inserts for each different nozzle…
![[Remix] Prusa Core One / MK4 Nextruder Magnetic Poop Holder V2 by jju182](https://media.printables.com/media/prints/aabb7198-2ffc-4286-8ba4-9ff5ee1b0d63/images/11202208_068412d9-f933-4058-85ab-6e01751062ed_26882f2d-e547-48e4-b4f4-87325e71d7b0/img_7439.jpeg)
