1 / 4
XL Nextruder Main Plate for Bogie Idler with Load Cell Protection — zdjęcie 1
1 / 4

XL Nextruder Main Plate for Bogie Idler with Load Cell Protection

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix combining the XL bogie idler main plate with a load cell protection wall for printing highly flexible materials.

Ocena
5 / 5
Polubienia
24
Pobrania
160
Wydruki
4
Wyświetlenia
833
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

This modified main plate for the Prusa XL is based on the excellent work done by @KentO_105090, @KocourMour_2487045, and @Ro3Deee and combines features from the bogie idler main plate with a load cell protection wall.

Looking for MK4(S) or Core One? Check out @gomi's model here.

I've used this bogie idler main plate in conjunction with @IPIND3D's bogie idler with more pivot to print Recreus Filaflex Pro 60A without any issues. So far I've been very impressed by the performance of the bogie idler main plate and have not experienced any jams. The addition of the load cell protection wall is cheap insurance to prevent damage (or in my case, prevent further damage) in the unlikely event of a jam. I previously tried many other designs uploaded to Printables and, in my experience, most are not immune from Shore 60A filament wrapping around the extruder gear. Let's just say the load cell's conformal coating on my toolhead dedicated to flexibles has seen better days.

Instructions

I recommend printing all parts in Prusament PCCF with standard Voron print settings (0.2mm layers, 40% gyroid infill, 4 perimeters, 5 top/bottom layers, 0.4mm nozzle). If you can't get Prusament PCCF, yxpolyer's PCCF will also work—I use the Prusament PCCF profile with slightly lowered temps: 270C nozzle, 100C bed.

Also print your idler of choice (original bogie idler or bogie idler with more pivot) and assemble according to the instructions here. Clearance will be tight, so exercise additional caution when installing the main plate to ensure you're not damaging the load cell's conformal coating. Also note that the nozzle will need to be loosened and lowered for installation of the main plate.

As a precaution, I highly recommend testing load cell function on all modified toolheads before homing or running the nozzle offset calibration (Control>Calibrations and Tests>Load cell test).

Acknowledgements

Thank you to @KentO_105090, @KocourMour_2487045, @Ro3Deee, and @IPIND3D for sharing your Nextruder main plate improvements!

Tagi