1 / 7
Prusa MK4 And XL Nextruder Nozzle Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Container To Store Assembled Prusa MK4 Nozzle Hot Ends, With Or Without A Silicone Sock.
- Ocena
- 4,929 / 5
- Polubienia
- 147
- Pobrania
- 445
- Wydruki
- 33
- Wyświetlenia
- 4216
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (21)Wydruki i komentarze (Wydruki: 33) (Komentarze: 81)Remiksy (1)Kolekcje (305)Powiązane
I wanted a simple design to store my nozzles and prevent damage, so I designed a simple and easy-to-use nozzle box intended to accommodate your entire extruder hot end assembly. It only requires a single M3x16 SHCS for assembly. You can customize it with text using Prusa Slicer 2.6.0 or newer. Two variants are included: one for the assembled hot end and another with added clearance for the silicone sock.
NOTES:
- All parts can be printed in PLA or PETG.
- Layer Height: 0.25mm.
- Nozzle: 0.4mm.
- Perimeter: 3 perimeters.
- Infill: 15% Gyroid.
- All my parts are designed for a well tunes printer.
- Added XL variants Feb, 06, 2024. with a additional 25mm of room.