Gridfinity 2x2 Mk4 Nextruder Nozzle Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact, space efficient, Gridfinity compatible Prusa Mk4 Nextruder nozzle tray that holds 8 nozzles.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 141
- Wydruki
- 2
- Wyświetlenia
- 702
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It turns out Nextruder nozzles will just fit within the dimensions of a standard Gridfinity 2x2 storage tray. I modified an excellent existing design to repeat the relief pattern and trim off excess material in each dimension, and eventually came up with this nice little tray that holds 8 nozzles. I also removed all of the size markings because I wanted to keep the base model as generic as possible. My version does not include holes for magnets, but I can make one that does if there is interest. I have also posted the STEP model in case anyone wants to modify it to add their own nozzle size markings.
I printed the pictured part in some (very) old silver Prusament with a 0.6mm nozzle and 0.32mm layer height + input shaping since I'm impatient, but I think any material or layer height will work fine here.