1 / 1
External M5 to internal M6 adapter (PC4-M6 to MK4 Nextruder adapter, reverse bowden) — zdjęcie 1

External M5 to internal M6 adapter (PC4-M6 to MK4 Nextruder adapter, reverse bowden)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows you to screw in a PC4-M6 into the MK4 Nextruder for use with a reverse bowden tube.

Ocena
5 / 5
Polubienia
9
Pobrania
119
Wydruki
3
Wyświetlenia
590
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Allows you to screw in a PC4-M6 pneumatic fitting into the MK4 Nextruder for use with a reverse bowden tube. 

I bought PC4-M6 fittings thinking I was going to use them differently, but eventually settled on a reverse bowden that goes right to the Nextruder. However, the thread on the Nextruder is M5. This part lets you thread the M6 pneumatic fitting onto your Nextruder.

Fair warning, the first one I printed in PLA (PETG hadn't arrived yet) ended up breaking off in the nextruder. I was able to extract it by pressing in a torx bit, then unthreading it. The PETG one has held up much better.

Tagi