1 / 6
#0081 MK4 / XL / Core One Nextruder Extruder - with Socks Hard Case (4x) — zdjęcie 1
1 / 6

#0081 MK4 / XL / Core One Nextruder Extruder - with Socks Hard Case (4x)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hard case that holds 4 extruder assemblies with socks for the MK4, XL, and Core One.

Ocena
4,857 / 5
Polubienia
34
Pobrania
143
Wydruki
10
Wyświetlenia
865
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, please consider buying me a coffee, and check out my other models!

**********

After I published my hard case for the MK4 and XL that holds 4 extruder assemblies, I started getting requests for versions of different sizes and for extruders with socks.  

In particular, I want to acknowledge my collaboration with @kerry_363 for this version that holds 4 extruder assemblies with socks on. With the dimensions he gave me and the feedback and pictures he provided, I'm now able to share this model with you.  (I don't use the silicone socks so I couldn't test it myself).

[Update, Aug 16, 2023]: as requested, I've uploaded .stl files without the helper disks.

Features:

  1. The lid has a solid-feeling snap together clasp.
  2. Each extruder pocket has a clasp to securely retain the stem from accidentally falling out.
  3. Printed text to indicate how to remove each assembly from the case that reads: “<< LIFT HERE”
     

You can find my other Hard Case versions here:

  1. MK4 Nextruder Extruder - with Socks Hard Case (2x)
  2. MK4 Nextruder Extruder - no Socks Hard Case (2x)
  3. MK4 Nextruder Extruder - no Socks Hard Case (4x)

Important: 

The lid is intended to snap securely into place.  To open for the first few times, just be a bit careful - but do not use a screw driver or any tools…it will damage the hard case.  After a few open/close cycles, the lid becomes easier to open.

Note: This has only been tested with the Original Prusa Silicone Socks.
 

Recommendations:

  1. This is a great model for PLA. 
  2. Print with 2 perimeters, 15% infill (I used triangular)
    Note: tested with 0.4mm nozzle.
  3. A 3-4mm brim is recommended along with ~15mm adhesion helpers at the corners to prevent the corners from lifting up.  I also recommend a 4mm brim.  See the .3mf file attached.
  4. Printed in Prusament Galaxy Blue PLA.

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

Tagi