Liczymy pasujące modele…
Summary Minimalist hardcase for your M5 Cardputer — designed to protect both the display and keyboard. A small opening on the bottom allows you to easily push the device out when needed. If you’d like to support my work, you can also…
A hard case to increase durability that the battery slides into. Should work with all 28x45x160mm lipos.
I modified this box https://www.printables.com/model/682040-parametric-box-no-screws-needed to fit the MSI Claw A8 size, deleted the 3D scanned body https://www.printables.com/model/1542865-msi-claw-a8-3d-scan of my MSI Claw A8, slightly…
The stock door is too small for hard-case LiPos. This one will fit them. Requires supports.
Very easy to print, with no supports. You will need 4 6x3 Magnets. Its super durable but still the glasses wont fly around in it. Its made for my oakley sunglasses, but i guess due to they are really big, nearly any glasses will fit in…
Hardcase to scale to fit the size of your need. This new version 2.1 of the hardcase has a list of minor changes as well as functional improvements and design was slightly changed to be easier to print all compared to the old version 1.0…
This remix can be printed with non-flexible materials as I removed the edge on the backside. Printed mine with ABS+
Case for the as-of-writing new Seek Nano 300 thermal camera, specifically the Android + USB-C-version. It's entirely possible that it also fits other models (Nano 200? Lightning?), feel free to remix in case (höhö) those don't fit. Case…
I wanted a small box for my GoPro Hero9 with room for the remote and a few connectors. I padded the bottom of the GoPro compartment and the lid with 1mm thick self-adhesive felt. The hinges and latches require 6pcs 3x30mm screws or grub…
You can choose which way to insert the playdate - with the ports accessible, or not. Should slide in and out easily, but not by accident. Proudly made in Tinkercad! If you want to make your own version see…
i printed 100% infill petg. Hinge should snap in but clip may need some filing
Literally just 5 minutes thrown together in Fusion360 😅, to replace storing the Geiger meter in it's slightly bulkier original packaging. Fairly thick sides to keep the device safe. Also inflated 1 mm in the screen-direction to fit a…
Summary Minimalist hardcase for your M5 Cardputer — designed to protect both the display and keyboard. A small opening on the bottom allows you to easily push the device out when needed. If you’d like to support my work, you can also…
I noticed all the existing models for this have the incorrect bevel angle. This model ensures a snug fit, but not overly so. Please enjoy and share feedback~ Included models -A plate blank -An ‘Emergency’ plate Print resolution Doesn't…
Print in PLA, not supports need it, the button fits are print in TPU. i add a file to add a NTS1 MK1, or to remix, to put other synths
Seven revisions and two stupid mistakes later... This is a semi-open hardcase for the Fnirsi DPS-150 power supply. The PSU be used in one position, or turned around in order to protect the screen. (I am using a custom glass screen…
Been experimenting with Li-Ion, LiFePO4, and LTO-cells in different sizes, these are a few different holders I've whipped up over the years. Some of these are quite quick'n'dirty slap-together-jobs, and might have duplicate faces from…
NOTE: This model is created to fit quite snug, so in order to account for filament shrinkage you might have to scale the model up to 101 or 102% Print with .12 layer thickness. enable tree supports. Make sure to clean the inside of the…
Just wanted a simple case that prevents buttons from being pressed. Seems to work? Version with and without Polestar-logo, and a Step-file if you'd like to modify it. (Printed on an ancient Prusa MK1, thereof the ghosting.) Category:…
I saw a lot od different cases, some better or not so good. Just decide to make my version with dust/rain protection. In this case using some TPU elements Just to understand how assemble there is Assemblem obj and stl. On the renders…
A hard case to increase durability that the battery slides into. Should work with all 28x45x160mm lipos.
I modified this box https://www.printables.com/model/682040-parametric-box-no-screws-needed to fit the MSI Claw A8 size, deleted the 3D scanned body https://www.printables.com/model/1542865-msi-claw-a8-3d-scan of my MSI Claw A8, slightly…
I made this hardcase for my multimeter and the accessories, but can used for other purpose
Hardcase DJI Osmo Action 6 Salut à tous ! Je vous partage aujourd'hui le design de ma Hardcase pour la DJI Osmo Action 6 . Ce design est directement inspiré du style de protection développé par Yannick FPV , axé sur une robustesse…
Hardcase DJI Osmo Action 6 gopro mount Salut à tous ! Je vous partage aujourd'hui le design de ma Hardcase pour la DJI Osmo Action 6 . Ce design est directement inspiré du style de protection développé par Yannick FPV , axé sur une…
HardCase pour Osmo Action 6 Kayouflip / Kayoudur Paramètre d'impression: 30-50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
HardCase pour Osmo Action 6 Kayouflip / Kayoudur Paramètre d'impression: 30-50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
Handgriff für die Fujifilm X half Kompaktkamera mit Handgriff vorne Daumengriff genarbte Oberfläche Airtag-Halter Aussparung USB-C Port Lautsprecherkanal teilweise geriffelter Boden ⅜ Zoll Gewinde um eine Adapter-Buchse auf ¼ Zoll…
Handgriff für die Fujifilm X half Kompaktkamera mit Handgriff vorne Daumengriff genarbte Oberfläche Airtag-Halter Aussparung USB-C Port Lautsprecherkanal teilweise geriffelter Boden ⅜ Zoll Gewinde um eine Adapter-Buchse auf ¼ Zoll…
The stock door is too small for hard-case LiPos. This one will fit them. Requires supports.
I needed a Insert for those Cheap hardcases you can get from Aliexpress etc. Its parametric and Provided as a FreeCad file with a spreadsheet to enter your values The values are Int. Width : left to right as seen from the front Int.…
There is a newer version of this thing After trying 2 of the existing cases for the TS-100 soldering iron I was a bit underwhelmed with how bulky they were and how fragile the hinges turned out to be. Also I did not manage to print one in…
I designed this simple Hardcase for my Softcase Zeee 3S 5200mAh LiPo Batteries because most tracks here require hardcase batteries and its safer anyway. The case consists of two parts, a body and a lid. The lid snaps in place with 3 tabs…
Quick design for a Pokémon TCG card case, can be used with sleeves too. Handy for transport or shipping. Friction fit!
This is a replacemant for the rubber case that comes with the Nordic Thingy:91, an IoT prototyping platform. This hardcase leaves the ON/OFF switch as well as the connectors free. The presliced model is printed in PETG and tested on a…
It should be easy to put the drone in and out of the box. Therefore, this is not a "lid" design, but two halfes. You can easily grab the drone when the box is open. Have a look at the YouTube video: https://youtu.be/qLaCz_ccFZk The main…
This Model is a simple conversion for your Softcase of the Momentum 3. There are sollutions to just print a completely new case but thats wasting Filament. So i made this. A simple ring that you push into your Softcase and boom! You have…
Hardcase for sunglasses This case was orignally designed for an Oakley Ejector inside its protective pouch . Other glasses should also fit, as long they do not exceed the following dimensions: 142 mm (W) x 44 mm (H) x 36 mm (D) You need…
Hardcase for sunglasses (easy access) This case was orignally designed for an Oakley Ejector inside its protective pouch . Other glasses should also fit, as long they do not exceed the following dimensions: 142 mm (W) x 44 mm (H) x 36 mm…
>>>>>>>>>>>> NEW Version 2.0 is available here. <<<<<<<<<<<< ------- This is the older version 1.x. Click here to get new model. This hardcase lets you scale it to suit you needs. Model is free. Please consider uploading a photo of a make…
I used Purefil tranpsarent green PETG for this print: 255°C, 70°C bed temp. 0.16 layer height. retraction length 5mm at 35mm/sec, movement speed 120mm/sec. infill at 80 percent, used gyroid infill for overall strength. some post cleanup…
I was gifting someone a Wiha 28550 TorqueVario-S Handle and wanted a nice way to present it. I came across these nice Moocy Hard Case boxes Model MO9096, that worked perfectly, and even included foam I could cut to size. Long story short,…
Hardcase TAB7 by MBOT3D I deliberately made this design, because I have a feeling of wanting to have a compact & simple device in one unit to be able to run my 3d printer machine. Like similar products that have been market out there.…
I make this travel case. Only you need are magnets ( 6 mm x 2 mm). Printed with support on bed (due the hinge). I recommend print first middle part (hinge with one magnet hole) /just cut left and right side of case to spare time and…
(Printed in Fiberology PCTG Onyx, Clas Ohlson PLA Gray, Bambu Lab PLA Black) This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense The case is made for…
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense Bring the Uno cards safely into your suitcase or backpack with a new plastic case that wont dissolve…
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense The case is made for bridge-size cards, so they will not fit poker-size ones Bring the playing cards…
I bought an FDE Apache 4800 case from Harbor Freight and I wanted to customize the look/feel of the default latches. Print on a side so you dont need supports and you get the most strength. I used 0.2 mm layers with 5 layers for…
Use this STL to customize your own name plate for your Apache 4800
This is a single GoPro 9 battery case with a slot for a micro SD card. Prints without supports, the only support needed is built-in, remove after printing. The 3mf file consists of the top and bottom parts, place them separately on the…
I use a Logitech Mx Anywere 3 (Mac) for my Macbook and this wasn't an issue until i've been bringing my Macbook to work and dumping it on my Timbuk2 messenger bag. The mouse often gets squished and buttons pressed from movement of inside…
The case uses 6 glued-in 5x2mm magnets for closure. It is made to fit Koss UR40's when they are folded. The one in my pictures has been used for about 2 years, and it withstood a lot of abuse. It could be made slimmer and rounder, but I…
This hard case is designed to protect the mouse when going out with the laptop and G PRO X I printed this with P1SC You need 8 magnets. (10mm x 3mm) To add color to the logo, You need AMS or ERCF Here are two versions available: one with…
Travel insert for 6 1911 magazines and 5 50 round 9mm S&B cases. Fit cases with interior 20,5x13,5x6,5cm. (8,07x5,31x2,55 inches) a quick travel/go bag for the classic/singelstack shooter on airplane travel
I made this belt holder as a battery holder for my DJI FPV goggles. Zeee 2S Lipo: https://www.ebay.de/itm/144804334415
Very easy to print, with no supports. You will need 4 6x3 Magnets. Its super durable but still the glasses wont fly around in it. Its made for my oakley sunglasses, but i guess due to they are really big, nearly any glasses will fit in…
This tray replaces the owl that is provided with the CR Scan Otter and allows for storage of up to 12 magnetic markers. I modified the marker pyramids to use magnets with a diameter of 6mm and a thickness of 5mm. But the original pyramids…
Hardcase to scale to fit the size of your need. This new version 2.1 of the hardcase has a list of minor changes as well as functional improvements and design was slightly changed to be easier to print all compared to the old version 1.0…
This parametric LiPo HardCase can easily be customized to fit your LiPo SoftPack and turn it into a proper HardPack. My design approach was driven by the following requirements: slim design to fit many batteries and RC car's battery trays…
This remix can be printed with non-flexible materials as I removed the edge on the backside. Printed mine with ABS+
English version This is a hard case for the Hisense A5 Pro. It can protect your E-ink smartphone from damage. And a 3D model of the Hisenses A5 Pro is also included(Hisense_A5_Pro_Body.step). I hope it helps to expand E-ink community by…
Case for the as-of-writing new Seek Nano 300 thermal camera, specifically the Android + USB-C-version. It's entirely possible that it also fits other models (Nano 200? Lightning?), feel free to remix in case (höhö) those don't fit. Case…
