1 / 4
Silicone Sock Mold for Prusa Nextruder (MK4 + XL) — zdjęcie 1
1 / 4

Silicone Sock Mold for Prusa Nextruder (MK4 + XL)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a bugfix and modification of existing model from TimTwix. TimTwix did an excellent work on the original files.

Ocena
5 / 5
Polubienia
64
Pobrania
231
Wydruki
5
Wyświetlenia
1667
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I originally used TimTwix's files. In mode “open”. I found out that one M3-nut recess was bad, could rework it. During casting and during de-casting I happened to loose some nuts. The casts were excellent, not burrs, no leaks, really fost shot targeted!

Instead of glueing the nuts in (Loctite) I modified the stl's for receiving heat-inserts. Makes it more durable. For approx 0.6mm I filled in the seat of the M3x25 screws, which lets the screws penetrade less, just a little bit.

Anyway, thanks to TimTwix for this great basic file. I cast 11:00am and hade the first sock in operation at 2:30pm. No rework, no fix, just cut off the casting riser, that is it. Details came out very nice.

You'll need the silicone caoutchouc, four M3x25 SHC, four M3 heat-inserts. That is it. Enjoy casting.

Explore my other Printables: https://www.printables.com/de/@Tritschi 

Tagi