1 / 4
Silicone Sock Mold for Prusa Nextruder (MK4 + XL) — image 1
1 / 4

Silicone Sock Mold for Prusa Nextruder (MK4 + XL)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a bugfix and modification of existing model from TimTwix. TimTwix did an excellent work on the original files.

Rating
5 / 5
Likes
64
Downloads
231
Makes
5
Views
1,667
Reviews
6

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I originally used TimTwix's files. In mode “open”. I found out that one M3-nut recess was bad, could rework it. During casting and during de-casting I happened to loose some nuts. The casts were excellent, not burrs, no leaks, really fost shot targeted!

Instead of glueing the nuts in (Loctite) I modified the stl's for receiving heat-inserts. Makes it more durable. For approx 0.6mm I filled in the seat of the M3x25 screws, which lets the screws penetrade less, just a little bit.

Anyway, thanks to TimTwix for this great basic file. I cast 11:00am and hade the first sock in operation at 2:30pm. No rework, no fix, just cut off the casting riser, that is it. Details came out very nice.

You'll need the silicone caoutchouc, four M3x25 SHC, four M3 heat-inserts. That is it. Enjoy casting.

Explore my other Printables: https://www.printables.com/de/@Tritschi 

Tags