Prusa XL - 0.3 Nm Nextruder Torque Wrench for the default TX 8 Torx key
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 0.3 Nm Nextruder torque wrench for the Prusa TX 8 Torx key
- Ocena
- 5 / 5
- Polubienia
- 95
- Pobrania
- 326
- Wydruki
- 14
- Wyświetlenia
- 2019
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why 0.3 Nm?
source: The right Torque for your Prusa XL Nextruder Nozzle by INVESTEGATE
Printing
- open the PrusaSlicer file as project
- print the objects using PETG (DON'T throw the purge, may it is needed later). Object torque-case-B is optional (I scaled it to 100.66 on X, 100.66 on Y, and 100 on Z)
This is a remix of models by Perinski and INVESTEGATE, adapted for the default Prusa TX 8 Torx key and optimized for 3d printing.
Assembly
- you need:
- Prusa TX 8 Torx key
- the 3 printed parts (torque case A, torque case B, torque rotor)
- a cutter:

- insert the rotor into the torque case A
- insert the Prusa TX 8 Torx key into the rotor middle hole
- optional: maybe use little bit of purge filament to lock in place the cap (torque case B) [no need for purge usage if the case is scaled a little bit like 100.66 on X, 100.66 on Y, and 100 on Z), put the cap and cut the excess filament

- now you can use the Nextruder Torque Wrench that gives the unofficial the 0.3Nm torque. To replace the nozzle follow the official Prusa instructions.


Extra
Also provided in the 3mf files are 2 slightly modified hex bits rotors from TORQUEY - Prusa XL Edition - Torque Wrench for the Nozzle . They provide almost 0.3Nm and 1.5 Nm torque.



The 1.5 Nm rotor can be used using The nextruder nozzle adapter for 6.3mm 1/4'' Torque Adapter/Wrench and ¼" inch hex to ¼" square adapter to tighen the nozzle to the header block.

