1 / 1
Prusa XL Nextruder Tool / Number Clips (1-5) for PTFE tubes — zdjęcie 1

Prusa XL Nextruder Tool / Number Clips (1-5) for PTFE tubes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small clips to show the Tool Number

Ocena
5 / 5
Polubienia
33
Pobrania
164
Wydruki
5
Wyświetlenia
1029
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Simple dual colour print for a clip on tool number. I just thought it helpful to label the tools on the printer and came up with this design in CAD. I then used the text tool in Prusaslicer to embed the numbers 1 to 5.

Ideally printed with a 0.4 nozzle at 0.1-0.2 layers height. Although the XL comes with 0.6 as standard so that at 0.2 layers should work as well.

Make sure your bed is clear to get a nice first layer. I like the textured bed finish for these. 

Check out my nozzle size/type clips: https://www.printables.com/model/632876-prusa-xl-nextruder-nozzle-size-type-025-08-for-ptf

Tagi