1 / 6
Single Wheel Nextruder Idler Lever for Brittle Filaments — zdjęcie 1
1 / 6

Single Wheel Nextruder Idler Lever for Brittle Filaments

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Single wheel idler lever for printing particularly brittle filaments. Designed for use with Polymaker Fiberon PET-CF17.

Ocena
5 / 5
Polubienia
45
Pobrania
131
Wydruki
4
Wyświetlenia
1472
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

General

When printing particulary brittle filaments like PET-CF the two idler wheels on the Nextruder can intruduce too tight bending radii and inturn break the filament.

This is a Drop-in replacement for Nextruder idler lever. Based on the one from the MK4/MK3.9 printable parts with the file names idler-lever-A-R2.stp and idler-lever-B-R2.stp but tested on Prusa Core One.

The number of idler wheels is reduced from two to one. The remaining one sits 2.5° lower than the middle of the initial idler wheel positions to improve reliability when loading filament.

Warning

This part was designed for usage in a printer that ONLY prints PET-CF. This part will perform a lot worse than stock when used with soft materials like TPU due to the worse constrained filament path.

Do not use this part in your general-purpose machine.

Tagi