Single Wheel Nextruder Idler Lever for Brittle Filaments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single wheel idler lever for printing particularly brittle filaments. Designed for use with Polymaker Fiberon PET-CF17.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 131
- Makes
- 4
- Views
- 1,472
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
General
When printing particulary brittle filaments like PET-CF the two idler wheels on the Nextruder can intruduce too tight bending radii and inturn break the filament.
This is a Drop-in replacement for Nextruder idler lever. Based on the one from the MK4/MK3.9 printable parts with the file names idler-lever-A-R2.stp and idler-lever-B-R2.stp but tested on Prusa Core One.
The number of idler wheels is reduced from two to one. The remaining one sits 2.5° lower than the middle of the initial idler wheel positions to improve reliability when loading filament.
Warning
This part was designed for usage in a printer that ONLY prints PET-CF. This part will perform a lot worse than stock when used with soft materials like TPU due to the worse constrained filament path.
Do not use this part in your general-purpose machine.