Counting matching models…
“How much air filtration do you want?” - “Yes” ------------------------------------------------------------------------------------ Giant Bagpack Airfilter for the PRUSA CoreOne using 250x370 mm IKEA FÖRNUFTIG HEPA- & Carbon-Filters (18…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
This just adds some gcodes to move the extruder to the middle of the CoreOne before and after the nozzle scrubbing. I've added a few more scrubs to the code, and allowed the original nozzle cleaning method to remain. If you want to remove…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
This is a compact waste bin designed specifically for the Prusa Core One L , helping you keep the inside of your printer clean and tidy. During printing, filament purges, stringing, and small leftovers tend to accumulate inside the…
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for PETGSource material: PET
Hey Folks, If you search for an Organizer for the Gen2 Upgrade you can find the model here: As you have to remove some screws from your CoreOne during the assembly of INDX using the INDX Conversion Kit, I have made this organizer in which…
The tissue dispenser is easy to print. It's hollow inside, which saves time, material, and costs. For added stability, it can be filled with sand, for example, so it sits firmly on the table. A TPU cover for closing the opening is…
Hinged magnetic door for the filament bay of the Prusa Core One. Based on the original Filament Hatch, this version adds three integrated hinges, allowing access without fully removing the cover. The door closes flush and is held in place…
Remix of this models: https://www.printables.com/model/1474221-snap-on-coreone-extruder-fan-grill-cover-remake-of I merged the snap-on functionality of @NE3D model with a cloud design.
“How much air filtration do you want?” - “Yes” ------------------------------------------------------------------------------------ Giant Bagpack Airfilter for the PRUSA CoreOne using 250x370 mm IKEA FÖRNUFTIG HEPA- & Carbon-Filters (18…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
This is a remix of a temp tower for the Core One, using a non high flow .6 nozzle. This is what I used after installing a .6 Diamondback nozzle, as there is a rather large thermal conductivity difference between the brass or obsidian and…
Motivation and Background This is a slightly overengineered filtration unit for the Prusa CoreOne printer. Initially, I printed the HEPA and Charcoal filter from CNC Kitchen…
Zur Reinigung der Nozzel vor dem Druck. Drucken mit 0,2 mm Schichthöhe, 2 Perimeter, 15% Infill und Stützen mit Überhangschwellwert 10. Wiper in das vorhandene Loch am Drucktisch mit einer der übriggebliebenen M3 Schrauben und Mutter…
I couldn't find a low profile exhaust attachment for the CoreOne as I wanted to have it turn off to the side as soon as possible. So I made my own. The outer diameter of the circle is actually 102mm as that was a better match for the tube…
Werkzeughalter für CoreOneL Werkzeug, Feilen, Skalpell, Schaber, Stechbeitel , Entgrater, Zangen, Seitenschneider, Messingbürste und Filamentverbinder Tool holder for CoreOneL tools, files, scalpel, scraper, chisel, deburrer, pliers, side…
There are plenty of nozzle wipers for CoreOne. But most of them are attached to the bed. So you can only use them for the first (few) layers. This one is mounted on the front left Y-bar holder. So you can use it for any layer. It uses a…
Nozzle wiper for the Prusa CoreOne with both an A1 mini brush and a brass brush for the more stubborn gunk. The brass brush is in a plugin that will pop off if the bed gets too close to the bottom of the printer. This means you can still…
Die Idee von BogoRin ist nicht schlecht. Da ich das gleiche Problem wie er hatte, und das Klebeband sind gelöst hatte. Darum suchte ich nach einer Lösung. Mir gefiehl die Idee aber das Design war nicht so mein Geschmack. Habe die…
This 3D model is a filter housing designed specifically for the Prusa Core One+ . It is compatible with the Bosch R2598 activated carbon filter, commonly used as a cabin air filter in Ford and Volvo vehicles. Why the Bosch filter? Because…
Printed out of PETG filament with a 0.15mm profile. Be careful to wait until the bed is cool, the flaps are fragile. I modified this model from Printables: https://www.printables.com/model/1169222-prusa-core-one-flaps . I didn't have the…
I was going to make a version out of TPU but the tolerances on this print in PLA was tight enough that while not pressure rated it should be more than enough to stop air exchange. If you are really want it air tight use a bit of silicone…
Ich habe den oberen Deckel meines CoreOne + mit Magnetstreifen befestigt. Der Magnetstreifen ist 15x2 mm. Da deshalb der Druckkopf das Lüftergitter nicht mehr öffnen kann, habe ich diese Verlängerungskappe entworfen, die einfach auf den…
Hinged magnetic door for the filament bay of the Prusa Core One. Based on the original Filament Hatch, this version adds three integrated hinges, allowing access without fully removing the cover. The door closes flush and is held in place…
I lost one of my insolation inserts while upgrading to the CoreOne+, so I designed my own one.
This adapter screws on the back of the Core One L with (4) M3x10 screws, makes a good seal, and has a 20mm+ gap between the fans and filter to ensure the air can spread over the entire filter surface area. The Tesla Model 3/Y HEPA +…
I purchased the original cover for the MMU3 from Prusa to install on the Core One. However, in my opinion, this configuration negates the advantage of a closed build chamber, as the PTFE tube to the extruder creates a large opening.…
Update: works with Firmware Version 6.5.3, my impression is the autovent works a little smoother now. The testfile has to be renamed to .gcode and works for the CoreOne+ but is your own responsibility. The stock top cover of the enclosed…
I created a new holder for 4 printing plates and 4 nozzles in the package. Everything is designed for COREONE and MK4 plates. They fit exactly on the HSW wall. I made variants for different clamping on the HSW wall. 1, Attaching with a…
CoreOne - Filamt-Umlenkrolle to the English version für nebenstehende Filamentrollen. Mit Schnellverschluss kein Filamentwechsel notwendig oder einer gesicherte Führung Benötigte Teile Gedruckte Teile: base.stl pulley.stl (2x) spacer.stl…
I printed arifilter case before checking if screw holes are in same place between CoreOne(+) and CoreOne L, so had to come up with some solution. This was easier than trying to remix the original top piece. Parts needed for this adapter:…
You will need 3 magnets 20 x 5 x 2
The tissue dispenser is easy to print. It's hollow inside, which saves time, material, and costs. For added stability, it can be filled with sand, for example, so it sits firmly on the table. A TPU cover for closing the opening is…
At my Core One, dust and debris accumulate in the gap below the door between the frame and the display. This clip fills that gap.
This is a compact waste bin designed specifically for the Prusa Core One L , helping you keep the inside of your printer clean and tidy. During printing, filament purges, stringing, and small leftovers tend to accumulate inside the…
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for PETGSource material: PET
A wedge that fits in the left recess of the CoreOne+, creating a level platform. I attached a 5x2 Gridfinity baseplate so all my printer tools and accessories are tidy and convenient. The wedge was too long so I split the model with…
The Fusion Gridfinity Generator was used to create the blank 3x1 bin with recesses for 6x3mm magnets. L-shaped cavities were added to hold the hex and Torx keys with an oval finger pull recess where the tools overlap to aid extraction.…
The original file is here , I provide Gcodes for Prusa: MK4 MK4S, MK4+MMU3 MK4S+MMU3. Core One Core One+MMU3 Reminder: if you're not using Gcode, before printing you have to go to: Print settings Layers and perimeters Perimeter generator…
This is a buildplate holder for 5 buildplates of the Prusa MK3 / MK3S / MK3S+ / MK4 / MK4S / CoreOne with an added handle for improved stability, and thanks to that it is also easier to move around. It fits perfectly to the Ikea lack…
This is my first real attempt at creating a model. Few attempts and changes leading to this v3 version that is a friction fit for the filter. 10mm standoffs keep the filter and fans separated to allow the airflow to spread out to use the…
For those who don't want to use the door for the build plates (for example, I have the Expandable Steel Sheet Holder https://www.printables.com/make/2338792 ), I have created a few new tool holders using the honeycombs. Magnet holder…
This is the CoreOne Benchy. Now the simple benchy can make its own repairs on the fly. Because everyone should have a 3-D printer.
I love the expandable steel sheet holder from Whity but I have my 3D printer in a IKEA BROR workbench. This workbench has its table to op some C-channel and that does not make for simple mounting of the sheet holder. So I made two…
Update** added a halved version thats split in two pieces for smaller printers. I purchased a few Core One printers and in the past ive always color coded my MK3/4's to make it easier for assigning prints, with the Core One this is a…
A easy to print box for A5 papers that you can print on Prusa MK series and CoreOne.
A handle for a drawer that takes inspiration from the CoreOne design. Ideal for a cabinet where the printer will reside*. It is intended for drawer fronts with a width of 16 mm and can be mounted from the rear using two screws (M3 × 16…
I made a handy Skadis holder for the CoreOne Nozzle Replacement Tool (sock).
Printed cover to mount the Prusa GPIO “Hackerboard” to the frame. Remixed it to use 3 magnets (6x2mm) to attach it at the back of the core one
Abluftfilter-Box für CoreOne - passend zu: Meaco HEPA-Filter 260x220x15 Abmessungen: Filter-Box: 270x225x40mm Hepa-Filter: 260x220x15mm - “MEACO” Montage: Alle 3 Druckteile: PETG-Kleber oder Silikon oder Klebeband oder… 8x M4x6…
If you are as disappointed as I am in the Buddy Cam 3D you are looking for alternatives. Here's one that works for me - hopefully for you too. It's a tilted mount for a Wyze v4 cam. No surgery required on the camera - just unscrew and…
Found my CoreOne vent would sometimes shake closed (yes I could have tightened the vent a little) so decided I'd make something to keep it open - My other challenge is I switch between PLA and PETG quite often so I wanted to have…
This mod will give you a fine filter, but for everyday use I have found this one to be better for everyday use. https://www.printables.com/model/1402101-core-onemmu-enclosed-dust-filter…
Maturity: Very Good. 7 prototypes. In use since 2025/05. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount. 2x M3 DIN 562 square nuts 2x M3x10 (length 10mm minium) ISO7380 or ISO4762 screws Insert the 2 M3 screws instead of…
It's ideal for maintenance, filament changes, or simply checking on the printer's operation without having to remove the entire top panel. The custom-designed hinges are engineered to hold the door securely in both fully open and…
This is a simple blank magnetic name plate for the top front of the Prusa Core One, just add your own text. It sits on the angled portion of the top frame yet maintains a vertical front for the name. Uses 1-3 10mm diameter, 2mm thick…
Remix of backside for https://www.printables.com/model/1205791-camera-case-for-esp32-cam-and-the-core-one-v2 but with smaller 6x3mm magnets - seems to be holding just fine.
After several weeks of using of this amazing new printer I have found that the side filament sensor was more hassle than help and decided to modify the existing part to just allow to push the filament tube straight through to the…
Just a different low profile handle for the top glass on the CoreONE to go along with the top door mod ( https://www.printables.com/model/1303271-top-panel-door-mod-for-prusa-coreone-core-one ). Nothing too special, just low profile and…
This Remix is for anyone looking to mount the Wyze Cam OG in their CoreOne. I had a few for my MK4S printers so I opted to try to use them instead of buying the Buddycam. I redesigned the bracket in Inventor so that anyone can easily…
I was looking over models for adding a filter (HEPA or otherwise) to the CoreONE. I recently got my CoreONE and am looking forward to using some different materials, but I don't have the best ventilation in my workspace. I do, however,…
A purge bin for the CoreONE system, equipped with a cutout for a wiper and designed to hold 3 10×3 mm magnets.
Adaptador para incorporar el creality 3d digital spool rack a la impresora Prusa CoreOne.
Print Prusament PetG 0,2mm structural 7 perimeters glued with superglue I recommend printing on a grainy sheet. I recommend smoothing the bottom side with fine sandpaper after printing. I placed the seam outside the edge
By moving the housing of the magnet further, I weakened the strength of the clamp enough to allow for super flexible filaments to pass the ball part of the sensor. Every other dimensions are the same and it fits exactly like the original…
Magnetic CoreOne WebCam Holder! Parts needed for assembly: 1x TPLINK TAPO C100 2x Magnets: 6*2*20 mm .Print in place! .PLA Tested
I print PETG and PCTG almost exclusively. The vents on the CoreOne frequently get closed by accident. This little 12 minute print fixes that. If you need to close the vents, just remove it and set it to the side.
This is a new version of my previous version. Cover added. I printed it in Transparant PETG
This lets you connect your CoreOne to a 100mm tube so you can send out both heat and fumes
Some time ago I have remixed the MK4 cover to fit the MK4S updated screen, this cover replaces the MK4S to "Core One", otherwise the covers are completely interchangeable. This is for the same reason as the original, keep the dust out and…
My printer stands really close to a wall. I didn't like to have the exhaust directly on to the wall because my apartement is only for rent and i don't want to get the wall dirty over time in that spot. So i designed an exhaust das…
On the original holder, there was nothing to hold it in place when I opened my tool tray. This added a box that holds the handle so the nozzle tool will stay put. I printed in ABS with 15% infill and organic supports to help with the…
I wanted to make a door handle for the Prusa Core One that looks similar to the original one in steel. Hence I designed this two piece handle that you can just screw in existing holes using two M3x8mm screws . I also added slots for four…
Printed in PETG Lid with TPU filaflex Magnets 2 16x6 x 2mm The box can stay in place with the lid on for short prints ore PLA. Otherwise just open the lid. The chambers goes down to approx 17%.
Habe hier einen Isopropanol Halter für den Core One gemacht. Da ich keine Spule rechts verbaut habe und eine MMU3 nutze brauche ich den Original Halter nicht. Hier eine alternative ;) Einfach 4x Ruthex M3 Einschmelzhülsen rein machen und…
I created this lamp for my workspace right to the printer. With 6 10x5mm neodymium magnets, it attaches perfectly to the printer (I believe 4 strong magnets is more than enough). The lamps used is a pair of T5 30cm Led Lamp like this:…
Filter holder for the CoreOne. Uses the IKEA FÖRNUFTIG (fine filter + carbon filter) filter bundle that is cut in half for space saving and better economics. Can be printed on the Prusa XL Filter are easyly cut with a staney knife, and…
Update - Don't use this, the tube doesn't go nicely into the enclosure top. I'll need to lower it, which will require the re-working of the electronics. I'm not very happy with the access once completed. See the picture. I switched back…
I wonder why it's not a part of factory package, but here's a simple grill knob for your CoreONE. Use M3 screw.
Just be aware I made this at a time nothing was available for Ultimulti and Prusa blob mmu3. so me as a not designer I just did what I possibly could. I know it’s horrendous, but works! The holes need to be a bit punched through. As I…
Meant to prevent snags in my CoreOne when the filament tries to escape sideways from a loosely wound spool. Not the best invention since sliced bread but it does help sometimes. Affixes to the CoreOne frame with cylindrical neodymium…
I use a Tapo C100 camera because I could not wait for the Buddy3D Camera, CORE One. It installs with two or three neodymium magnets in the frontmost topmost left corner of the enclosure. It streams beautiful images in real time that can…
Taulman3d Alloy 910 profile for a .6 nozzle. Has been working well for me over 3 weeks of testing. I use a textrured plate with elmers purple gluestick and have printed tall parts, thin parts - no adhesion issues, no warping.
Print in PETG 1.the two 20mm x 6mm magnets into the housing with a press fit 2. Optional lubrication to improve sliding performance 3. Press all the way down until it clicks 4. Assemble both components 5. Bring the 1.the two 20mm x 6mm…
Adjustable width, support 2kg spools, better prevent spool falling out.
This custom IKEA SKÅDIS mount is designed to securely hold the CoreOne Snap Rivet Remover right where you need it. To make life even easier, I’ve added a small integrated tray to store spare rivets — so replacements are always within…
The cover can be used on both sides of the printer. Hinges can be placed on the left or right, allowing you to choose the direction the door opens. All parts are very tight, be careful when assembling. Extra material needed: Neodym…
Benötigte Kaufteile: 2 Lager Typ 628 (24x8x8) 4 Einschmelzmuttern M3x5.7
I didn’t like the standard CoreOne spool holder, so I designed my own. Capabilities Larger spool holder shield so the spool does not fall off as easily Supports different spool lengths 7.5-14 cm: Default: 7.5 cm RecommendedMax: 12 cm…
@CoryDumalski_3558547's MMU3 Buffer Plate Holder - Bottom Support Bracket Upgrade MMU3 Buffer Plate Holder - Bottom Support Bracket Upgrade with holes added for 8x3mm magnets. If you do not need magnets or wish to remix, please use the…
Simply reduction for using filament spool Jake from Aliexpress to Prusa Core One spool holder.
Pockets are for 10x7x3mm magnets. You might change it using attached STEP file. Attach the handle with two M3x8mm screws.
This is a remix of a temp tower for the Core One, using a non high flow .6 nozzle. This is what I used after installing a .6 Diamondback nozzle, as there is a rather large thermal conductivity difference between the brass or obsidian and…
After assembling Sam's very tidy MMU3 Community version, I decided to make a few slight modifications to save space on the width of the whole unit. The main modifications are: Buffer Cover: Reduced width by around 2mm. This saved some…
Back Ground I have a MMU3 and I bought a CoreOne printer. But I am too cheap to buy the MMU3 to CoreOne upgrade kit/parts. so I made this to mount the MMU3 on CoreOne top. Features: Keep the original CoreOne top panel, no cut no drill.…
Back ground In case you are like me, don't have the CoreOne Black Power supply, but have a better power meanwell power supply LRS-350-24 and want to use it for your coreone printer. But why don't I have the official prusa black psu?…
I started printing Nylon on the CoreOne and the adhesive on the door handle was quickly coming loose. I initially secured the handle with a screw and a locking nut, but I didn't like the look, so I designed this cover to fit a leftover…
While printing high temp materials, the double side adhesive tape that “secures” the door handle tends to soften and become less (to none) effective. There are endless manners to overcome this problem including a simple m3 bolt and nut.…
This is a mount to allow the use of XL style spool holders on the core one. Specifically it was modeled to allow the “XL Spool Holder with a Twist” designed by Karkovski you can find his design here. Parts Required: 1 x M5x 80mm Cap Head…
This handle replaces the finicky three screws for opening and closing the top vent and comes close to the looks of the door handle. Openings aren't covered in any way, have a close look at the model. !!! Print this part with the biggest…
UPDATE 2026-01-10: I am now done with the fan integration to this filter, you can use the old printed filter and just screw on the Fan add-on. With this setup you will get basically the same temperature with the door closed and running…
DIY Printer Ventilation System for ABS/ASA Printing This model is designed for anyone who needs to print with ABS or ASA but doesn’t want to spend much on expensive filtration systems — especially if you have a window near your printer .…
![CoreOne Magnetic WebCam Support [ TPLINK TAPO C100 ]](https://media.printables.com/media/prints/ee9937cd-35d9-4e50-ae4c-a35043c39608/images/10175967_70e52221-5961-4624-bf67-268062f2c189_d5592770-4552-4c95-ae33-c52fd67c6e94/img_5281.jpg)
