CORE ONE + MMU3 chamber vent enclosed version automatic upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MMU3 enclosed Version automatic vent upgrade for the blop version of the top cover V10 Firmware 6.5.3+12780
- Rating
- 4.5 / 5
- Likes
- 13
- Downloads
- 52
- Makes
- 2
- Views
- 303
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: works with Firmware Version 6.5.3, my impression is the autovent works a little smoother now.
The testfile has to be renamed to .gcode and works for the CoreOne+ but is your own responsibility.
The stock top cover of the enclosed version of the mmu3 with the blop has different vent openings like the acryl version. So i had to design a new Version of the slide stick. I used a test program to open and close the grille and it seems to work perfectly. You have to add the printhead mod from the CoreOne+ upgrade at Prusa printable parts. You can use the stock screws and the -ugly- knobs on the outside. Then you activate it in the hardware section of settings menu by turning it to ‚auto‘. Best prints in 30% infill gyroid with black Prusament PC-Blend (looks like the grille)
BUT: this is not an official Prusa part so i'm not responsible for any harm to your printer so here is the DISCLAIMER: if you using this mod it is your responsibilty anything fits together. Also you are responsible for start and end g-code mods and any damage there might occur.
If you want to fix the problem that the firmware doesn' t put the vent in the right position at every start here is a solution from the forum: