Counting matching models…
Cute mini Octopus , the ORIGINAL! It's designed so it can be printed at once. No assembly or supports required . Many different STL files, with straight or spiral tentacles, both with and without included support. UPDATE!! v6 fixes some…
Für SD-Karte, Stifte, Taschenrechner, usw.
Fully parametric folding laptop stand designed from scratch in Shapr3D. Set your display size and the model updates automatically; a thickness variable lets you tune looks and material use. Adjustable height via angled notches with a…
Add a practical hanging point to the back of the seat and make better use of the luggage compartment. This 3D-printable fold-out hook provides a convenient place to hang lightweight everyday items such as shopping bags, small accessories…
DungeonStick Church or Cathedral setup. Fast prints without support. Round DungeonStick connection for maximum flexibility. Easy storage Use the included couplers to create a symmetrical build. Functional doors (print in place). Give them…
A novelty project for my sons series x, looks great and sits on top without any glues,tape etc. A small lip inside makes it sit perfectly on top of console Stl included so you can paint any way you like
Vertical desk holder designed for Sakura Micron pens. Holds 24 across two tiers. Also Rotring Tikky, though they stick out a little higher. Holes are 11mm wide so anything else with a barrel that size ought to work. Print Settings Printer…
See https://www.printables.com/model/378521-laptop-stand/files for details. Use this model for the sides if you have a thicker laptop.
No need for supports. Prints fine with PLA. Designed to fit around stands like this: These stands are made for at most 15.6inch. This extension allows for deeper laptops to be supported without them leaning back. The laptop shown in the…
Size base 140x109x19mm. Size holders 52x52(or 104)x107(or 77 or 47)mm. Filament need cca 70-90m. Next model:
Usage of old Seal: → Pull out rubber seal from broken cap with tweezers, cut off the upper part to a hight of 3mm (right between the bottom and the first edge) to get a new fitting seal. The seal will generate tension on the notches → no…
Size base 195 x 97 x 52mm(height without locks). Size holes for pencils 13.5 x 13.5mm. Use papers 9 x 9cm. Holes for USB, SD cards and micro SD cards too included. Vhen you need use glue for hard plastic (Tamiya, UHU…) for locks.
a Simple door stop. Print on sides. Glue some rubber/felt on the bottom surface.
Desktop turtle sandbox. There are others and perhaps better ones, but I wanted to try my hand to fulfill request from my daughter. Some gluing required for the flange pieces that keep the lid in place. (sorry, tool not included) I have…
//_UPDATE_// In putting together everything I found out that the umbilical plate that I originally put on was the smaller one. There are several different options for the plate. Ultimately there are 2 sizes and many options for what cable…
Vertical notebook/laptop stand originally designed for a notebook with a keyboard thickness of approx. 1.3 cm. The laptop shown in the picture is a Lenovo (original design was based on an Asus VivoBook 14 Flip, 14"). The model can be…
This is a simple clamp to prevent 4mm Teflon tubes from sliding in and out of boxes or printer enclosures. Avoid printing it with materials that creep (permanently deform under load) easily.
I made a small holder for litophanes. I made those for my christmas presents this year, if you want to print it for christmas it's probably too late, but there is also a christmas next year Printing Instructions: I used black PETG, no…
Holds a MacBook Pro 2021 14" on the leg of a Flamaker Electric Standing Desk. Model is designed to take 4 M6x20mm Bolts, with spring washers. I used Diall branded ones from B&Q. In order to make sure that the leg was gripped tightly, I…
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
This print is not a magic device. You need a lot of practice and patience and time to weld the filament together with Sunlu's filament connector (Filament Connector FC01). Any filament should work. I printed with 0.2 mm layer height 0.4…
Comes with two different twist options; form fitted and round. Use a bit of glue on the print surface to ensure good adhesion. Printed with 15% Gyroid.
Full Top Rail 0.2 Layer Height 99% Infill Supports Yes M5x30mm and M5 Nut needed for Front M5x16mm and M5 Nut need for Top Rail to Rear Rail Attachment. 2 Screws needed for Rear end Receiver (Metric or Standard Depending on…
brings the Dell E74XX up to monitor height. I'm sure it would work for others as well. I used 3/8" wood dowels to complete this nifty laptop riser. (cut to roughly 9 ¾" - so that the back lands between all the plug ports -see photo)…
Wall art / topper / coaster / keychain: Unicorn - 24 cm, 10 cm, 5 cm (four colours)
Wall art / topper / keychain / coaster: Unicorn - 24 cm, 10 cm, 5 cm (three colours)
Wall art / toppers / keychain / coaster: Alicorn - 24 cm, 10 cm, 5 cm (three colours)
Disclaimer: the author is not responsible for any damage or harm caused by malfunctioning of the stop button A bigger tactile emergency stop button for LaserPecker 4 (LP4) laser 2 colors can be printed separately and then inserted later…
Halloween themed back scratcher. For the writer / note taker that needs a head scratch to get the ideas flowing. Easily accessible. Never loose your pen. Easy to print No supports Designed for Bic Round Stick Pens
Stand is made from more parts. Use “AsemblyScheme.pdf” (and instant glue). You will nedd more parts : Screws : M3x12; M8x16; M4x10 Pads : Felt pads 38mm, Silicone pads 10mm see the “AsemblyScheme.pdf” Good Luck … :)
I remixed the great design made by @AndreasJade_261770 to print it from PLA in one piece using support material at the interface. Printed it standing up in about 5 hours on my Bambu Lab P1S.
Ghost - 0.2mm or whatever, Hat - 0.1mm or finer, prints without supports (Use inner brim for better adhesion) Model is taken directly from Tf2 model library, but I did spent the whole morning polishing up the model. Have any other ideas…
Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…
This custom-designed silicon tube stopper features a unique spike in the center, making it an ideal tool for both sealing and cleaning tubes. The spike assists in dislodging debris and ensuring the inside of the tube remains clear, while…
Ofcourse you can ommit printing skulls ;) And enjoy the stand without it. Its robust, works well with 14' or 15' laptop.
The old plastic broke away and the drawer always fell out. So here ist the new end Cap for the Drawer rail. The wheel has a Diameter of 20mm.
I really love the look of the realistic octopus head by Stanos , but I wanted the nice articulated arms like those from McGybeer 's octopus. While looking around, I realized I could combine everything and even add longer arms. Since I…
This was requested by my Aunt who loves making frozen treats for her dogs. Very quick print. Plug the small hole of the dog toy… Fill with chicken broth or peanut butter or another dog safe filling… freeze…. remove plug.. give to dog to…
Deer trophy topper for the 50th / 70th birthday cake. I shared also the FreeCAD file of my remix. Remix of https://www.printables.com/model/617644-hunting-birthday-topper Notes: Extrude height: 2mm Bed plate: Satin Powder-coated Steel…
Update 11.05.2025 - New STL with Sceptre Crystal Holder for Broom Top. :) My wife wanted to be a witch this year for Halloween 🎃 👻. I decided to create her beautiful and shiny sceptre for this purpose. Model is including branches and…
These models are drawer organizers for the Sterilite 2073 Small 3 Drawer Unit ( Link ). This is a work in progress . I will be working on various divider orientations as needed for my use.
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
…Please be sure to hit like & post a make, I'd love to see your prints! WARNING! If you do not know how to wire this system correctly & safely I STRONGLY recommend you DO NOT attempt to print or use this model as you are dealing with…
This is a simple clamp to prevent 4mm Teflon tubes from sliding in and out of boxes or printer enclosures. The V2.1 shape comes with no ridges, 0.5mm ridges or 0.75mm ridges for better grip on slippery tubes.
If printing the modeled support version I would suggest using finger nail cutter to remove whatever support material is left on the model. The curved cutting edge did a better job than my flush cutters.
This model is compatible with the lego system.
This is delicate. There's no way to design a top that spins well and can survive rough play when printed in PLA. The stem will break in seconds. See “Playing with Your Top" below. Note: My PrusaSlicer project file and GCODE both use GCODE…
I made this part because I wasn't satisfied with top lid opened all the way back resting only on hinges, which added pressure to material and there was a risk of damage. This part makes enough space for hot air to come out of the…
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful. My kids need space on their desks and a cool idea was to store their laptops under the table plate. I have found several models on…
Unleash your inner dragon! This 3D printable model brings an Eastern Dragon head to life as a unique straw topper. Highly detailed and easy to print, it's perfect for adding a touch of fantasy to your drinks. Print flat with no supports,…
loved this laptop model by mothdotmonster, just wanted to have a deboss to the screen and touchpad, coloured up in three colours, added a white screen so i could use a waterslide decal as if laptop were powered on, awesome! thank you!
A remix of an already great spool holder to support the Creality K2 Plus for TPU printing. Printed with the long arm flat, regular PLA, 15% infill. Fits nicely on the profile edges with the top glass off. With the k2 plus having the…
Remix of simple hole cover that should be compatible with any AeroGarden product. Additional layers on the top of the cover (base of the print) completely block out the light, reducing the possibility of algae growth in the water…
I printed two of the 1:12 size, which makes it just a little too small for Skittles and M&Ms. One in PETG and one in PLA. The PETG supports removed a little less clean, other than that, supports off, then snap the legs down and up and…
Just a Top Cover for @pwnate Tea Bag Dispenser to be able to use the area on top. Fits loose enough that you can lift it up from the exposed sides but is snug enough to no wooble arround to much.
Door stop for furniture with cupboard. The original part broke so I designed a simplified version. Screenshot from slic3r for sturdy print direction for the peg.
This is a remix of the "The Laptop Saver - A sub-desk level drink holder" model clamp and a convenient headphone holder
Top Door Hanger with the Fusion360 File so you can modify it for your need.
These buffer stops will keep your wooden trains from running off the ends of the rails. All pieces print without supports. Feel free to message me if you need a custom size, and click here to check out my other train designs. Update 17…
I made the cut version to fit onto a metal stopper I already had. Obviously, an air gaps are a less ideal storage solution. And … it's all a basic concept for short storage … not an airtight solution for keeping fine vintages :). I…
Railing support 25 mm top adapter. Print in ASA for UV resistance. Sand and smoothen the top with acetone, if needed. Use 5+ walls for strength. For a clean top, print as is, with supports. Print outer walls first (or vv) to reduce outer…
This 3D-printed top floater is a replacement for the Eheim Skim 350’s original floating intake, designed to enhance water surface skimming while preventing fish from being drawn into the intake. The slimmer slits allow effective water…
Easy to print cake topper. Do a filament swap around layer 18 to make the surface color pop.
This is a basic wall mount bracket for your desktop toy swords. When you're bored at the computer, you can play with a 10-inch sword of your choice. This wall mount displays those swords between plays! This is an upgrade from and…
Beautiful Christmas decoration, just insert the LED light.
This simple and practical stand raises your laptop and creates extra storage space underneath, perfect for keeping notebooks, pens, or other essentials close at hand. Its sleek, modern design fits seamlessly into any workspace and works…
Additional endstops for Ender 3 with X axis driven by smooth rods from this repo . The endstops should touch the top smooth rod so make sure that hotend is out of the way during alignment. Requires two M4x10 screws and t-nuts pairs and…
Optimised for FDM printing with top flat on build plate. Compatible with 8x2mm magnets. Sizes Include: ROUND / STANDARD : 25mm 28mm 32mm 40mm 50mm 65mm 80mm 90mm 100mm 130mm 160mm LONG / VEHICLES / MOUNTS : 25 x 70mm 32 x 80mm 40 x 95mm
Ever wanted to make your trumpet a little more fancier? Well look no further! Introducing the: Trumpet Top Hat This model should fit trumpets that have a holder for a slide ring and a hole that is 4mm wide and 4mm tall. Made with TinkerCAD
Size 125x160x100(height)mm. J, K are inserts for I (F). For insert (B,C,D) you can use brim. Wall depth 3mm. Filament need cca 90-110m. First complete parts B(C,D) and E(,F,G,H,I). Seconds models:
this part plugs in the height adjustment handheel to prevent it from rotating and thus prevent unwanted sawblade decrease
Star - PLA 0.2mm LH minimal support, only to support overhang and bottom points, paint on or set to support critical regions only Tree - PETG translucent green 0.2mm LH vase mode No supports, Vase mode, outer brim only Small LED tealights…
CZ : Vrchní dekorace která nesmí chybět na dortu každého dobrého rybáře při oslavě narozenin. Stačí přidat kousek vlasce a rybku přivázat na prut Tisknuto PLA EN : Top decoration that must not be missing on the birthday cake of every good…
The original design had a stacking lip on the bin which is not needed, and I had finger holes to get the staples and staple puller out, but it is easier to just dump it out.
Features Two colors Dimension: D52 x 66 mm 3 Pieces: rod, plate with pattern, body of the top 2 executions of the body: 1x normal and 1x 6-sided (for the dice pattern) Filament: PLA Nozzle: 0.4mm Layer: 0.2mm Caractéristiques Deux…
I created this fin to redirect the hot air coming out of the back of the laptop and prevent it from being recirculated back into the laptop. The cable holder is optional. It might work with other laptops as well.
I made this model at the request of a friend who works with children. In the classroom, they sculpt a lot from various animal shapes. She really liked it and I decided to share it. I hope you like my first model). If you have any…
Elegant 22 cm Christmas tree topper, featuring a sleek design.
A spiral design, created in FreeCAD using the Curves workbench and mainly the Sketch on Surface and Gordon Surface feature. Fits a 90cm high tree very nicely. Printed in PETG (because I had no PLA in that color) with 0.1mm layer height,…
Printronix T8000 series - stop on rolls of A4 paper
This is a functional top hat. It fits my fairly large head ~24" circumference. Printed on an Ender 5 Plus 3 walls Top hat body piece is printed with the top of the hat on the bed. Use supports. Brim slides down the body and rests upon…
Do you have a tesco crate box hanging around that is not finding any use? Do you ALSO have a bike with a topeak pannier rack on? Well do I have news for you my friend, with this nifty device you can turn your old green box into your BRAND…
50mm DN50 D50 pipe cap/stub/stop Заглушка канализационной трубы 50mm
