1 / 5
Raspberry pi 3B+ case for 3030 beam (Octopi)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case to use a Raspberry pi 3B+ with Octopi on 3030-beams (Prusa mk3 etc.).
- Rating
- 4.818 / 5
- Likes
- 50
- Downloads
- 271
- Makes
- 10
- Views
- 2,437
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A case to use a Raspberry pi 3B+ with Octopi on 3030-beams (Prusa mk3 etc.).
An optional cable guide for the pi-cam cable.
No screws needed. Everything snaps together..
There are holes to attach the Raspberry to the bottom part using pieces of filament.
Use 4 pcs of 1.75 mm PETG filament that you guide through the holes and bend them slightly on each side.
Works better than I could hope for.
Print instructions
The bottom part needs support from buildplate only.
Cable guide and top prints without supports.