Counting matching models…
All printable parts for your Original Prusa i3 MK3S+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Attention,…
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
All printable parts for your Original Prusa MK4 and Original Prusa MK3.9. MK4/MK3.9 upgrade Stage 1: Read the manual first! Don't disassemble the printer for now, follow the instructions provided in the manual. Original Prusa MK4 assembly…
Description All printable parts for your Original Prusa MK4S and Original Prusa MK3.9S. Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTURAL Filament: PETG (tested on…
The Heatbed Cable on my MK3 was starting to sag and catch on the frame of the printer. So not wanting to pull it all apart I made a simple clip on support that does not require any tools or disassembly to fit. There is also a version for…
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
From the original model's page: These are token boxes for the game Blood on the Clocktower. The base game comes with 3 scripts and the travelers/fabled, and at the recent convention they amazingly gave all the attendees a copy of every…
https://www.traiva-shop.cz/p/automaticky-hasici-system-proteng-500#34010
Filament : Prusament petg. PETG 0.20mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : 85c. Support : None. Enable Ironining. All top.
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
Object description: Remix of the original part “Wifi_module_cover_R1”. Please compare the revision number with the original part before printing. Let me know if this has changed so that I can provide an update as soon as possible. The…
Object description: Remix of the original part “el-box-cover_R4”. Please compare the revision number with the original part before printing. Let me know if this has changed so that I can provide an update as soon as possible. The NFC…
This puts the GPIO card under the wifi card, so the pins are low and at the back of the machine and easily accessible. The GPIO cable passes through the slot for the bed cables. MMU text included for Wifi and GPIO symbol. Uses 4 m3x10 (or…
I wanted to use the HULA feet for the Prusa Enclosure and not just the printer itself. So i used the outline of the original foot for the Prusa Enclosure. From there I designed the foot to connect to the HULA foot and enclosure. Hope…
The ASA printed parts I received from Slice Engineering, with the Prusa I3 MK3S+ Mosquito Upgrade kit, are slightly different from the original parts, as designed by WickedTwister. The rectangular opening, just above the heater block,…
I recently purchased the Mosquito for Prusa MK3S+ upgrade kit from Slice Engineering, that comes with the ASA printed extruder parts. On my previous setup, I've been quite pleased with the Delta-P print fan duct and wanted to use it with…
Printed in Voxel PLA Orange (Close to Prusament Orange, but slightly lighter) .020 layer height 2 perimeters .015 Infill - whatever infill pattern you like Supports for mounting holes
It's a bit jenk looking, as I barely know how to modify an STL, but I did what I could and it should be functional. I mostly hope that the original creator will share the original 3D files or make these new and improved versions…
So this is a remix I've been working on for a few months on and off style. The model is really cool and I wanted to have it in a semi printable state. Haven't actually printed it out yet since it's a multi-part model and I wanted to share…
A simple case to mount a Raspberry Pi Model 4 B onto the frame of the MK3S using the existing, unused, M3 screw holes. Some clips to route the USB power cable along the rear of the frame upper arm, out of sight. It's a simple, clean and…
Since the temperature in my garage does not allow for 3D printing in very cold conditions, I built a polycarbonate enclosure. This enclosure allows me to store my Prusa MK3 (protected from dust) and to carry out prints in a warm…
Simple nozzle holder for Prusa MK3s, which you can put on the top of the printer. It can be printed without support.
I made a drawing, and it is an exact replica of the cable clip that comes with the Prusa MK3.5. After reviewing the manuals, I understand that all the new models use it (MK3.5, MK3.9, and MK4, along with their S versions) since they share…
I recreated these shifters using photos and datasheets provided by Cosworth. They originally are part of the entire CCW MK3 wheel design, but as that won't be finished for some time, I decided to release them as a standalone design so…
This model is used to hold the photo button.It is possible to do stop motion with the help of the holder.
My 1st creation. Make sure, you have sharp edges inside the hook for frame.
Description: This is my fifth “NX” project (after ProtoXtruderNX , AeroXtruderNX , AeroHGXtruderNX , TitanHGXtruderNX ) adapting the HGXlite drive and a lever inspired by the NEXTRUDER from @Prusa3D . Although I designed and printed the…
The box is fixed to the frame so that it does not need to be supported by the table. Outer dimensions: 247.2x99.8x52 mm (without hooks). It's possible to print both the box and the lid at once. Before printing consider adjusting size of…
A simple BLtouch mount for the ender 5 Corexy mod with a e3d v6 revo hotend
Z-Axis Top Mount: Longer version to use on the left side with the servo attached. Extruder Cover: Optimized to use with 4mm OD, 2.5mm ID PTFE tube.
Hi there! This time I bring you a easy two armed light upgrade for your 3D printer. The file consists of 4 main part Arm seperated to 2 smaller part Holder and arm - could be printed as one for better load-bearing capacity Connector for…
Found this GCODE a few years back and found it very useful for cleaning/lubricating my smooth rods. Demo: I use this stuff: https://www.amazon.com/Super-Lube-21030-Synthetic-Grease/dp/B000XBH9HI/ Blurred out in pic as I'm not advertising…
an updated john Deere styled hood for openrc tractor mk3 from wekeas original version (https://www.myminifactory.com/)
Prints in place with only supports for the bolt tabs (at least on my MK4s printer) I have test fit this in my car and it fits great, can't test it with a speaker for a few more weeks/months due to the car being restored Drivers door…
I have not tested these with speakers as my car is currently stripped for restoration, but test fits show these to fit perfectly Category: Automotive
This is my first upload, so please excuse any imperfections in the design. The part is a VW Golf Mk3 cold air intake adapter, made for performance enthusiasts and DIYers. For best results, use filament with a glass transition temperature…
This is my third spinning top design. Pegasus would never have a chance against this one. This Spinning top comes with a launcher! The spinning top is 2 parts connected together perfectly without the need for glue.
I modified the object after printing to fit a distanced rasPi because I bought the version whit all pin
Ford Focus RS Mk3 Keychain A 3D printed Ford Focus RS Mk3 keychain , designed for true performance car enthusiasts and Ford fans. This model captures the aggressive look and spirit of the modern RS — a perfect addition to your key set or…
Voron StealthBurner has no filament sensor, let's add one. In case you have a MK3S's filament sensor retired or spare, we can use it to make a filament sensor for stealthburner. Voron stealthburner…
All parts printed in PETG accept the Light lens. Light lens was printed in PLA. I added the light lens to protect the LED strip. Light bar works well for my needs. Its a simple yet effective design for the older MK3S+ printers. Thank you…
Inspired by Devilscave's Ultimate Spool Holder V3. Just like the original, my version can be used as a table stand, or can be clipped onto the frame of the Prusa MK3 (MK4). The original Prusa spool holder does not need to be removed and…
This is an adapter to allow you to run a MK3 brake booster on a MK1. Print in ASA or ABS.
Inspired by the need to print something 213mm tall on a printer with max height 210mm, annoyed by the fact that there is clearly a large gap between the lower mounts of the Z-axis and the toolhead, and frustrated that this upload would…
What is Galileo2 : it's a open source extruder https://github.com/JaredC01/Galileo2 What is a PRUSA MK3S+ IR filament sensor? What is MK3S+ IR filament sensor? you can get one from your old retired MK3S+ printer, or buy one for about $6,…
This design mounts the BIGTREETECH ADXL345 2.0 accelerometer board to the bed of the MK3S+ or any bed that is under 5mm thick. This design uses 4-40 screws that screw directly into the 3d print.
This design replaces the extruder idler with one that has mounts for the BIGTREETECH ADXL345 2.0 accelerometer board. It is not a full-time replacement and is only intended to be used during input shaping calibration. You must reinstall…
This is a shortened front end for the Levergun MK3 to allow a bcar to be fitted on the barrel. This however reduces the tube capacity to a 7 shell config. It mates perfectly with a 31cm barrel. Meant to use a gfz bcar or any bcar with…
First, I mounted the ESP32 camera on the printer using the “MK3S+ ESP32 Cam Camera Mount” by @detlassnake_289499. After being dissatisfied for a long time, I wanted to mount the camera on my PLATSA enclosure, so I developed the base plate…
A simple model to raise your decks 80mm up from the table surface. Perfect fit and really sturdy. Simple perfection.
This is a remix of the original Prusa MK3 spool holder, modified to be mounted in a flipped orientation. By reversing the part, loading and unloading filament spools becomes much easier and smoother. The design is adapted to fit the Ender…
This box holds an Airtag or MixFlip Airtag clone. It is mounted above the control board. You need the following screws. M3*6 x4 (For the lid) M3*12 x2 (For mounting) NOTE: The heads are 1mm thick. This is important for the clearance for…
I wanted to add some hidden magnets to the original part. added spots for a 10mm dia magnet, or 12mm dia magnet as well as a 10x20x3mm magnet in the rail itself.
The Light Bar has now Printed Endcaps. The Diffuser is Printed in White or Clear PETG and clips into the Light Bar. Since the Printz of the Diffuser sometimes is just one or two Layer make sure you use dry and well tuned PETG to work.…
For more information, see the original remix author: https://www.printables.com/model/1394873-nozzle-wiper-mk3s-mk35-mk39-mk4s Compatible with PRUSA front plate cover: https://www.printables.com/model/1196244-prusa-front-plate-cover In…
Remix of the official LCD-knob to look and function like an old rotary phone. I find this works better when scrolling through settings or adjusting the z-height. Printed with default PLA settings 20% infill no brim.
Fan Protector for SIYI MK32/15 Series Air Unit
5020 fan upgrade for mk3s bear (Bondtech Extruder) .I printed parts with sla high temp material, for best look and resistance. Can be printed in PETG or PA variants. M3x5 4pcs. M3x10 2pcs. M3 nut 1pc. Fan i decided to solder on a 3 pin…
Same as the original model but modified to fit a 6mm diameter magnet.
So I may have made the mistake of overtightening the print head fan screws (again). Rather than replace the whole fan, which is otherwise in perfect condition, I figured a couple of little "shrouds" to go over the cracked mounting holes…
Nozzle holder for PRUSA I3 printer (0.25, 0.4, 0.6, 0.8)
1-6 numbered eject Buttons for the vertical mounted Prusa Mk3/4, Bambu X1C, P1, A1 Build Plate holder from Frantisek23 Printing recommendation: PETG, PLA might also work 3 perimeters 20 % infill, Gyroid no supports
If you drive a Seat Altea, you know the struggle: there’s plenty of space, but nowhere to put your phone. The interior is full of those early 2000s "bio-design" curves-everything is rounded and flowing, while modern phones are flat and…
A filament guide for Prusa MK3S printers where you can put the spool next to the printer, and not on the top. It is an easy print, just use the gcode or the STL. Only requires a 625zz bearing and an M4 or M5 bolt. The M4 bolt threads in…
Printed with maxed out walls for myself and has held up great
This is a remix between two models, print at 20% infill with supports for the flat overhangs.
When printing, hexagons don't need any supports however the semicircular bridge should be supported.
MK4 "Naked" Gyroid Dampers (TPU) - Anti-Vibration Feet Summary Sponge-like vibration dampers for the Prusa MK4 printed in TPU. Uses exposed Gyroid infill. Requires specific slicer settings (Vertical Shell Thickness OFF)! Description These…
Modified sensor cover for the Multi-Material kept simple (BMMU) to suit mk3/s/+ Original Model - Multi-Material kept simple modeled by @3dbaptman Ensure Toolchange Gcode disables filament sensor. {if layer_num >= 0} M406 ; Disable…
I remixed the arm to attach to an adapter that spins and holds the camera
I recently upgraded my MK3S+ with an MMU3 only to find that I had rather frequent issues with the MMU3 not being able to feed filament into the extruder. The filament would snag onto something inside the pneumatic fitting and just...not…
Filament holder for Prusa mk3s+. Easy to change filament and moves with little friction. Filaments are quickly changed by only lifting up the roll holder and unscrewing by hand the insert. Hardware needed: One 140mm long threaded rod (M5)…
Raspberry Pi 3 B+ screwless case (snaps shut) with built in mount for Prusa MK3. It leaves the Raspberry Pi's ports fully accesible and hides it away behind the frame. Be sure to check the credits of this remix, which would not exist if…
Update: Electric Trigger Parts you need to buy on amazon: Relay board, 5v power supply, wire, misc connectors, and male to female bread board jumpers. The other stuff you should have got with the orginal Loop electric. I used these:…
I just added a couple of pieces and cut them at an angle. I also reversed the slots for my use scenario. Thanks to the original author for including the fusion file, which I also include. Enjoy!
Needed a mount for WYZE Cam V4. this one fit the bill. my first remix. I hope you like it.
Určeno na ukládaní morse kuželů, MK4, MK3, MK2 . U mě tisknuto bez podpěr ale doporučil bych je zapnout přemostění je dost dlouhé.
A simple holder for print plates - holds up to 6 plates. Can be printed in any material. The holder has small bumps at the bottom of each slot, so that plates can align. The bumps have the same geometry as the two pins on the back of the…
ULTRA Square.stl: Wall mount for the Benchdogs MK3 ULTRA Rail Square ULTRA Rail Square Upside Down.stl: Wall mount for the Benchdogs MK3 ULTRA Rail Square Wall Mount with MAX Extender MAX Extender.stl: Wall mount for the Benchdogs MK3…
PETG recommended with at least 15% gyroid infill, 2 horizontal and 3 vertical shell layers. Supports recommended but not required.
This is a slightly improved version of the Dial Knob by onethou. Enjoy
Fan shroud that can be mounted onto Delta P Extruder cover. One shroud is for extruder without sock and 1.5mm lower one is for extruder with sock. I am using dragon hotend with my mod for extruder cover but outside is the same for both.…
EN : After installing the speakers, I noticed two things. First, I had to adjust the mounts because the speakers simply wouldn’t stay level when hooked into the profile bars. I might need to run another tolerance test. Second, I noticed…
Buddy3D mount for Prusa MK3/S/+, MK4. Difference from the original is that the base faces right instead of left.
Put this together for a themed Mk3 rebuild, and sharing is caring. Things you'll need for assembly: -A little drop of super glue That stylish LCD Cover shown in the pictures is by BaGooN:…
This upgraded X-axis motor mount is part of the unofficial “MK2.9S” evolution of the Prusa MK2 platform, bringing modern adjustability and improved belt management inspired by the MK3S+ design. The mount replaces the original…
If you plan to build custom Prusa MK3 with thick steel frame you can use this part to hold Einsy box in place on frame with zipties. Feel free to remix for various thicknesses. The tabs on bottom are not really useful but the top one is…
Part is no longer symmetric, you need to print it mirrored as well. Recommended settings for Prusa MK3S printer parts apply. Therefore orange PETG, 20% gyroid infill, 0.2 quality setting.
Golf 3 / Vento MAF-Adapter auf 65 mm Dieser Adapter ermöglicht den einfachen Umbau des Luftmassenmessers (MAF) auf einen 65 mm Ansaugdurchmesser für den Golf 3 und Vento. Ideal für Leistungssteigerungen oder individuelle Ansaugsysteme.…
PIPA DEL LIQUIDO DEL SAPITO DEL FOCUS MK3 LO IMPRIMI EN PET G Y QUEDO PERFECTO La tapa tiene el tamaño justo de los tarros de cafe de dolca chicos
Slide this adaptor into the back of your MK3 upper. You can then use Spiggytech's Glock sight pusher to press the rear sight. May work on other Ruger variants but I only have the MK3.
Remix of the COREOne+ Spoolholder for MK3 or MK4 printers to fit on top of the frame Heavy Duty Spool Holder for MK3/4 printers Upto 30 cm in diameter spools (had one for a time, now I can use it!) Spoolholder static R1 elonggated by 30mm…
This already has custom gcode for the mk3.5s to print a temp tower and change temp on the right spots
This is a modification based on the set of parts used to upgrade your Prusa MK3 / S / + with MK4 style parts. While assembling the upgrade, I found out that I do not have the needed 'pin' for the idler so I made a small conversion, parts…
