1 / 11
Prusa MK3 Ikea LACK enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.70 – €0.86 net (excluding VAT)
For file: DoorStop v17_0.2mm_10%_2p_51m_2.85243m_Solutech Black PLA.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.78 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 51.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Prusa MK3 corner enclosure.
- Rating
- 5 / 5
- Likes
- 93
- Downloads
- 102
- Makes
- 1
- Views
- 2,972
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My Prusa MK3 enclosure.
It features:
- 2 full size front doors for easy access to the printer
- walls and doors easily removable without tools
- back walls snap on with magnets
- doors use lift off hinges
- spool holder mount for original Prusa “T” holder
- wide slot filament guide
- adjustable LED lighting
- cable pass through for USB and lighting
- power cord pass though – PSU inside or outside
The design was inspired by:
- https://www.printables.com/model/14152-prusa-i3-mk3-corner-enclosure-ikea-lack-table
- https://www.thingiverse.com/thing:4631227
Parts list:
- 2ea Ikea Lack tables (2 tops and 3 legs)
- 4ea 18"x24"x.08" plexiglass sheets
- 4ea 5/16"-18 x 2.5" bolts & nuts (spool holder mount)
- 32ea M3x8 screws and nuts (4 per plexiglass panel)
- 6ea 5/16"-9 x 1.5" lag screws (attach 2 leg mounts to 2 tops)
- 6ea #6 x 1.25" drywall screws (optional, secure leg mounts to legs)
- 24 magnets:
- 8ea 12x2 - for leg mounts to attach back walls
- 8ea 10x3 - for 2 wall panels
- 8ea 8x2 - for 2 door panels
- LED strip 12V with dimmer
- LED strip connectors (to attach cut LED strips)
The filament guide
The spool holder mount