Counting matching models…
gridfinity refined baseplate — now extra, extra minimal! kinda! I ran out of space in my hardware drawer, so I needed to make baseplates. I like Gridfinity Refined, but I really didn't want my new baseplates to have magnet slots. editing…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Split the model to its parts and print each part separately Print all the pieces upright Use…
I created a parametric Picture Frame for Ikea Skadis Peghole Board. Download the attached Autodesk Fusion 360 file to adapt the model to your individual picture size. Parameters PicWidth : to change the width of the picture PicHeight : to…
ESP32 Bluetooth Maus für Fusion360 Es Gibt 2 Deckelversionen und 2 Drehrädchen. Die 2 Deckelversion hat beide Tastknöpfe aus dem ESP32 nach außen geführt. Eine seitliche Klappe um das USB Kabel zum Programmieren / Oder Seriell daten…
Podstavec pod misku pro psa, plastový kříž přišroubovat na 4ks kulatiny a postavit misku. Pes se již nemusí sklánět, aby se napil či najedl :-)
Being new to geocaching, I haven't hidden one yet, but I had the idea of making a mushroom cache after finding some caches resembling their stems. While searching for a suitable model to remix, I found the base model, which was already…
Skateboard wall mount Printed as segmented parts with alignment dowels.
The cap of the base model was slightly too small to fit the air valve on my bike so I made this remix. I used the occasion to thicken the wall and to make it printable without supports. I originally intended to just do a small extrusion…
Someone asked me for a stackable & modular thimble rack system, so here it is. The idea is to print modules and simply stack them in the order you wish, special variants were made for the bottom and top. There is a version for regular…
A smaller variant of my previously made dual color salamander which I intent to use as geoswag (small objects for placing in geocaching caches) in the future. The fusion360 file is given would you like to see how I did it, to modify it ,…
Closed end and an open end versions. I like the open end version so I can more easily grab the key I want 2 measurements required: Length of longest key from the key ring hole (see picture above) Thickness of all your keys stacked together
While this isn't my technique, I got inspired by it and tried to apply it onto another model. “AJ the Frog Low Poly” wasn't the best model after all for this technique but the result is still a succes in my opinion. Indeed, I learned by…
2.5D: 2D logo with additional height for some layers. I choose this image as my logo 15+ years ago while I still was a kid, I never new what it was nor where it came from and never though about it till now. I suddently was interested in…
There are 2 cap designs, one for the head and one for the rear connection. Naturally since the pole has the same ones you can use them for it as well (to cover everything you should print both models twice). The models should be a snug…
This coin can be used in shopping carts that normally accept 1 euro coins. Printing Information: Due to its small size I recommend using a 0.2 nozzle to print this model Originally this model requires 5 colors but I reduced it to 4 (to…
This coin can be used in shopping carts that normally accept 1 euro coins. Printing Information: Due to its small size I recommend using a 0.2 nozzle to print this model The svg art comes originally from smart/icons on iconfinder…
Sonntagsprojekt... Ein Gewinde mit großer Steigung sehr einfach mittels der "Präge-Funktion" in Fusion 360 erzeugen... Eine extrem praktische Funktion, die man für viele Ideen nutzen kann! Siehe auch:…
This coin can be used in shopping carts that normally accept 1 euro coins. It should also work with most 1e euro open shoppingcoin holders while not being perfectly round. Its compatible with “1 Euro coin holder” by CookieBerlin…
This coin can be used in shopping carts that normally accept 1 euro coins. It should also work with most 1e euro open shoppingcoin holders while not being perfectly round. It's compatible with “1 Euro coin holder” by CookieBerlin…
The fusion360 file are given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. I also joined a decimated version of the base model in the files, it contains…
Fusion360 files for generating sorting boxes for rectangular items from small to large. The examples in the photos are a sorting box for my creditcard sized filament samples and one for SD cards. Configuration There are two files: one for…
The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. Printing info: Scaling down can be tricky since the tolerances will scale…
The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. The stem act like a wedge, when hung the pumpkin is held together by gravity.…
The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. The model tries to depict a Blue-ringed octopus, the most commonly known toxic…
I could not find a fully parametric Gridfinity model in Fusion360 that met all of my criteria, so I built one from scratch: Easy to use and understand. The variables are named sensible things and have instructions on how to set them.…
The STLs for my “Intertwining Drink Coaster” model can be freely downloaded from the following page: https://www.printables.com/model/1018689-intertwined-drink-coaster For my club supporters though, the full source Fusion360 file is…
The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. The model depicts a chuchu from “The Legend of Zelda” series (breath of the wild…
54 mm filter paper holder for portafilter. Just change the diameter in the source file and you get it for all your needs. Just print it with 0.16 or 0.2 mm layer height EDIT 16.09.2025: Fusion360 is dropping support for windows 10 and I…
🌟 Say Goodbye to Gate-Opening Mishaps with This Childproof Knob! 🌟 When our little one started opening the garden gates like a pro, it was time for a solution. Enter this custom-designed childproof knob! Since installing it, the gates…
I discovered that the base model could be used in a different way than intended: If instead of flipping the piece 180°in Y you keep the basic orientation but rotated it 90° in X it can still fit together. However, in this new orientation…
Although these kinds of games already exist, it was reimagined as a 3d variant with some personal ideas. It's meant as a fun, pedagogical,... way to interact with logic problems. The idea is that you present your child with a card…
Sonntagsprojekt... The power of sweeping... (Eine wirklich TOLLE Funktion!) Fusion f3z-File ist angehangen... Versuch_2 als stl-Files hier zum Download... Der Druck in Originalgröße und mit viel Support dauert viele Stunden... Damit die…
I have designed a fully parametric set of drawer inserts for for IKEA Alex. Grid size is 48.25 x 48.25mm. Inner width of Alex is approx. 6 x 48.25mm. One can choose whatever dimension is needed from 1 x 1 up the maximum the printer can…
The fusion file is available to you, however since the fusion file wasn't provided in the base model this only covers my changes. Printing information: Use a brim to secure the model to the baseplate since the contact surface is quite…
Ratcheting Wrench Adapter(s) I intended to use a ratcheting wrench in our robotics toolbox at school to screw stuff together more efficiently, but the adapters were all missing. With some quick measurements, I made this printable…
The fusion360 file is provided so you can adjust the model to your liking through its parameters. You can also change the embossed text to what you need there. Printing information: Since this model will probably be in contact with water…
A fusion360 file is available but only for my changes since it is based of the stl of the base model. It can be useful for further remixes however. Printing Information: Use regular supports to properly support the petals Note that the…
This model updates the base model to add features to it, but it was kept as compatible as possible. There are 3 main pieces: The cactus itself: base model cactus with additional optional slots for a flower and to improve the connection…
This is a parametric Fusio360 file for the great design of Olo Deepdelver: Parametric Bottle Holders - IKEA SKADIS - SIDE version I've rebuilt the model from scratch but tried to stick to the original as close as possible. The minimum…
Initially made to be used as moving prop/fidget gadget on a Honeycomb Storage Wall by using this adaptor: https://www.printables.com/model/1062931-hsw-to-bearing-adaptor-parametric . This model was designed such that if you print multiple…
I like to store both new and used sheets near my printer. Fix this to your workbench using a #6 screw or double stick tape. Print in place with no supports This is my mounting tape of choice (affiliate link): https://amzn.to/3Z9ye8Z
Simple under desk mount. Mount with double-sided tape and I added a bit of grip tape on the top side to prevent the keyboard from sliding This is the double-sided mounting tape I use and recommend (affiliate link): https://amzn.to/4fvJIJT
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This model reuses the bambu lab spool holder and its two screws. Printing Information: Print this model on its back (with screw holes upwards) with lots of regular supports, otherwise the holder will not be strong enough and will snap at…
This is an enclosure where the length, width, height, shell thickness and gap for 3d printer tolerance is defined in the user variables menu of Fusion 360. I included the cad file so you can make a box of any size, or change the design to…
Dimensions 116.5x116.5x45mm^3. PLA ≅ 82g for enlosure 32g for lid(116.5x116.5x2.5mm^3) layer height 0.2mm nozzle 0.4mm
This model requires the PenguinEyeglassHolder.stl from the base model. I worried that the glasses might fall off, so I added a stopper to the nose to hold them more securely in place. The base seemed also quite generic, so I made a more…
gridfinity refined baseplate — now extra, extra minimal! kinda! I ran out of space in my hardware drawer, so I needed to make baseplates. I like Gridfinity Refined, but I really didn't want my new baseplates to have magnet slots. editing…
You can change the dimensions in fusion to fit it your pipe sizes. ;-)
It's a simple model that seperate screen and printer body. You can place the screen wherever you want, as long as the cable allows. I upgraded this model after I printed out because it had some stability issues. Upgraded model has m3x50…
Had to extend the model because the distance to the saw blade with the dial gauge was too short on my Metabo TS 254M. Musste das Model verlängern da es bei meiner Metabo TS 254M der Abstan zum Sägeblatt mit der Messuhr zu kurz war.
Hard to find. Easy to make. Easy to print. May be used for already dragged cable - cutted to allow this. Parametric. Make as you need. Open .f3d file in Fusion360 and edit parameters. Save as stl. Slice, print, enjoy! Print with TPU.…
While I love my original model I always felt it could benefit from a moving head, which is the case with this upgrade. Printing Information: There are 4 pieces that need to be printed individually: the body, the neck, the base and the…
This model isn't really meant to be printed as is but, while it is possible, it is more likely to be useful inside another bigger assembly. Printing information: Use regular supports to support the arch
This is a model of the MicroSwiss DirectDrive and AllMetalHotend for the Creality Ender 5 printer and was created by manually measuring some parts from my CR10/Ender 3 MicroSwiss DirectDrive, except for the backplate that I uploaded here…
FOR IMPROVED PERFORMANCE USE THE NEW V3 INSTEAD: https://www.thingiverse.com/thing:4975346 . . . This is a reworked version of the MicroSwiss DirectDrive Fan Duct for the Creality Ender 5. It's based on this remix i did:…
This is a combined BLTouch and Probe mount that includes a BLTouch protector. It will be referenced in future designs. In case you want to modify the design or create your own fan duct around it, it's available as a STEP and Fusion360…
This is a remix from an stl file of the MicroSwiss Ender 5 DirectDrive backplate uploaded to thingiverse. . . I made this so everybody can make their own fan ducts for their setup (although I have designed one for three 40mm axial fans:…
This is an exact model (+- 0.1mm tolerance) of the MicroSwiss DirectDrive and AllMetalHotend for Creality CR10/Ender3 printers and was achieved only by manual measuring. It's available as a step file or as a Fusion360 file (.f3z). I made…
This is a parametric Gridfinity stock bin file created in Fusion 360, designed to help you create your own custom bins with ease. I made this model with the guidance of Shop Therapy's YouTube video—big thanks to him! I couldn't find a…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Additional parts exist there as well (eye pupils and whiskers), these are left out since they are, at default size, to…
Print this to hold your macbook pro vertically (used for my 2024 M4 Macbook Pro 16") I included two models, one with holes for screws and one without. You can screw this into your desk or just slip it on for a press-fit
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. In addition to the main model in 3 parts, I added a version of the flower with a flat base and without hole would you…
Parametric Pegboard / Multiboard click hook. Customizable by changing Parameters in Fusion 360 - the free version is sufficient. Open attached f3d file in Fusion Click Modify - Change parameters Couple of examples attached (more than…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Split the model to its parts and print each part separately Print all the pieces upright Use…
Karlson was a few years ago one of the most hyped games on Steam at the detriment of its author. Indeed, Dani crumbled under the pressure he built up by hyping his game in the making. It came to the point where anywhere he went, he was…
While adding the useful feature of being able to print the model in color with only a non mmu printer, the base model sadly lost the ability to use fuzzy skin due to otherwise messing up the connectors. This model is the solution that…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. In addition to the main model in 4 parts, I added a decimated version of the base model for future remixes. Printing…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Split the body to its parts (not into objects) and apply the fuzzy skin only on the biggest part…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Split the model into its parts and print them all separately. Use regular adjusted support for…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: All parts can print regularly except the soviet star which requires a filament swap (it is too…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: All parts can print regularly except the german cross which requires a filament swap (it is too…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: All parts can print regularly except the german cross which requires a filament swap (it is too…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Split the model into its parts and print them all separately. No supports are needed (for the…
I made this model essentially as challenge to learn on how to manually cut models in blender. I didn't realise that 3D BENCHY was originally designed into pieces then merged by Prusa. It would certainly have been easier would it have been…
This is a simple spacer that can be printed to the exact measurements of the space left after you fill it with the base grid. 1 - open the file in fusion 360 2 - goto modify→change parameters & update the clickbase_spacer_width to the…
A display stand that was made for a restaurant but that can be useful elsewhere as well. It displays tripadvisor and facebook qrcodes to incite the clients to visit these places and follow/leave reviews. This model was made with qrcodes…
A display stand that displays printables and makerworld qrcodes to incite the passerby's to visit these places and follow/leave reviews. This model was made with qrcodes made with this model:…
Please follow the tutorial I created in the YouTube video listed below.
Parametric bin and grid, with x, y, and u. The stacking lip has notches to prevent sliding of stacked boxes No magnets. Recommended way of using it: For the grid, just use as-is. Open the file, edit x and y, and export to your favorite…
Printing Information: I recommend printing the model in PETG or other water-resistant filament. To improve the float ability of the model you can use only 2 walls and 0% infill. Use a brim to improve bed adhesion of the legs and antennae.
I was annoyed that my Festool vacuum cleaner has no clip for the cable. So I designed this cable holder in Fusion360 and printed it on my MK3S+. I use PETG for it and 30% infill.
Change parameters in Fusion 360 to generate your custom washer. Changeable parameters are I believe self explanatory: innerDiameter - inside diameter of hole of the washer outerDiameter - outside diameter of the washer thickness -…
Thanks to @Creo2005_265049 for providing the base with the f3d file. I changed it to fit Thetford N4241 / N4000 caravan fridge. To illustrate the dfference, on the first pic this part is clipped into the N4241 shelf, the original from…
This model updates the base model to add features to it, it therefore requires parts of the base model. There are 2 main piece changes: The locking Truss: In the base model the roof tends to slide off, this model replaces the two outer…
Printed it on my MK3S+. I use PETG for it and 30% infill. Remix because it is for 4mm cable and not for 10mm cable.
Printed it on my MK3S+. I use PETG for it and 30% infill.
I created a parametric Picture Frame for Ikea Skadis Peghole Board. Download the attached Autodesk Fusion 360 file to adapt the model to your individual picture size. Parameters PicWidth : to change the width of the picture PicHeight : to…
🌿 Say Goodbye to Pesky Pests with This 3D-Printed Inground Composter! 🌿 Are mice and rats turning your composting dreams into a nightmare? Time to kick those uninvited guests to the curb and embrace the magic of underground composting! ✨…
Printing Information: Use regular supports to support the base of the egg or slice a little bit off the bottom for the same effect. Split the model to its pieces and use fuzzy skin on of them to change the texture of this part if you want…
The fusion360 file is provided would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example. Printing information: Scaling down can be tricky since the tolerances will…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Print all external pieces flat on the bed and use tree supports to support the upper part of…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Split the model to its partas and print all pieces flat on the bed individually Use a brim to…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Split the model to its objects and print all pieces individually Print all pieces on their flat…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: Split the model to its parts and print all pieces flat on the bed individually Use a brim to…
Design: Fusion360 school Made some minor improvements for easier printing. Possibility to easily attach rubber feet. Printed with 3DJake magicPLA Filament.
Printed in PETG 40% infill
Einstellhilfe für Tischkreissäge wie z.B. Metabo TS254 oder Bosch GTS 10 XC Die Grundplatte mit der Messuhr läuft mit einem Gleitstein in der Nut des Tisches. Damit kann das Sägeblatt parallel zur Nut oder der Schiebeschlitten parallel…
In the memory of the recently deceased Pope Francis. Despite being too tolerant towards evil, he still gave his life to Christianity which was a noble pursuit. Rest in Peace (17 December 1936 – 21 April 2025). Printing Information: Split…
