1 / 2
Multi Part Panzerkampfwagen VI "Tiger I" tank 1/72 (fusion360)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Tiger I tank model printable in parts that press-fit together.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 149
- Makes
- 0
- Views
- 1,132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily.
Printing Information:
- All parts can print regularly except the german cross which requires a filament swap (it is too small on its own)
- Use regular adjusted support for all the pieces except the front hull and the front turret that can benefit from arborescent tree supports.
- Print all the pieces on a flat face or their connector
- Use a brim around the small pieces to increase their stability
Note that I preferred to keep the gun movement so I didn't add a connector to it, you might need a bit of glue if it is too loose but it should hold as designed by the base author.