1 / 2
Multi Part Panzerkampfwagen VI "Tiger I" tank 1/72 (fusion360)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Tiger I tank model printable in parts that press-fit together.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (30)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (42)Powiązane
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily.
Printing Information:
- All parts can print regularly except the german cross which requires a filament swap (it is too small on its own)
- Use regular adjusted support for all the pieces except the front hull and the front turret that can benefit from arborescent tree supports.
- Print all the pieces on a flat face or their connector
- Use a brim around the small pieces to increase their stability
Note that I preferred to keep the gun movement so I didn't add a connector to it, you might need a bit of glue if it is too loose but it should hold as designed by the base author.