Liczymy pasujące modele…
I had puchased something similar from a dive shop some years ago and ran across it recently and thought to model one up myself. Have printed it several times at various layer heights and after .2 made the threads a little tough to turn I…
Tanks in a shipping container format. It has the same sizes as my previous shipping containers and works with the same grid system and can easyly be stacked into large piles of containers.
A Tank Cap for a Moped. Optimized for 3D printing. STEP for easy modification.
this piece install into existing fish tank water filters and hangs off the edge of the fish tank to form a gentle waterfall. i use this to make the water calmer for my beta fish (his name is water :)
A retaining wall for the corner of your planted aquarium. Holds back substrate to create a layered effect with deep substrate your plants will love at the back and plenty of room for fish and shrimp activities at the front. The dimensions…
all parts are printable on a 220x220mm printer and all flat parts are CNCable on a 3018 PRO CNC hardware list 1.BEARINGS: 3x8x4mm X16 5x16x5mm X20 8x22x7mm 608 2RS X16 MGN12 C block + 50mm rails X2 2.SCREWS: M2x8mm X34 M2.5x10mm X20…
This is a simple ring to keep the lid closed for my Vaporesso Armour S. I'm sure this will fit a lot of other tanks as well with similar issues of falling open due to a faulty latch design. The step file is a blank ring, the STL has…
I designed and made a connection bearing for rolling wash of a developing tank. This connection bearing connects the developing tank and the motor, making it convenient to wash the film. The connection between the developing tank and the…
This is a work in progress. However, the files included are up to date and can be printed. Any parts added can be printed and attached to it, regardless of which version. You need 33 m3 screws to fully assemble. I would recommend m3*16mm…
I had puchased something similar from a dive shop some years ago and ran across it recently and thought to model one up myself. Have printed it several times at various layer heights and after .2 made the threads a little tough to turn I…
These are another models from very good game: battle cats. Supports needed.
Adapter for mounting thread to your water tank. Hole is 55.5 mm diameter. Thread is G1 1/4 BSPP
- Material: ABS, or PET-G - Resolution: 0.2 mm - Perimeters: 3 - Infill: 15% - Supports: Non
[IMPORTANT] THIS MODEL HAS CRITICAL ISSUES! I RECOMMEND PRINTING Sturmtiger tank, modelled to the one in War Thunder (stowage, details, etc. look exactly the same). It has the Raketenwerfer inside it, and the crane is meant to be glued…
This is a quick modification of duanesdiesel's scale propane tank that turns the model into a secret storage/stash container. The two parts friction-fit together tightly. Can be scaled, but make sure to scale both parts exactly the same…
Chceck also other models https://www.printables.com/@Jerryie/collections/2044634 . Easy to assemble. -Two colors -organic support -0.15 layer height
enjoy the arciculated togII just in case supports requied and tried to make rorating turret but it aint gonna work
A simple tankard I originally made to hold a can of soda but it is a little too big for that. The handle is a little small, so I recommend resizing the tankard as needed. I also recommend printing the handle separately from the tankard…
The funnel has an end to lock like the cap. Can be printed with 0.2mm layer height and PLA. The model is already in the correct orientation. Supports are needed only at the connecting piece. The slope for the funnel shouldn't need…
Suzuki GSX-R 600/750 SRAD Fuel Tank Mounting Seating Rubbers Cushions (100% infill)
A Tank Cap for a Moped. Optimized for 3D printing. STEP for easy modification.
Designed custom armor plates for spine area of Buster Doll Tank action figure. Armor parts can be printed without support (brim is recommended), then connected together using metal rods cut from standard paperclip. There is built in 3mm…
To assemble, insert half of the howitzer turret from the top into the hull, then the howitzer gun goes in from the front. Follow that by the other half of the turret from the top. Next the turret bushing. The top deck and finally the…
A remix of the excellent resin tank drainer by @K9DefenseTech_8289 . It holds the SL1S resin tank vertically with a slight forward tilt, so that the resin flows smoothly along one corner into a container below. I wanted one to fit a…
The gun elevates and rotates within the approximate range of the actual gun. I don't recommend any raft or brim. All the holes and edges will require some trimming. See photos for assembly. The assembly begins with the base 1. Attach the…
Two 1lbs coleman green canister holder. With two hook loops on the sides to hook and secure it or if you wanted to put multiples the loops should help secure them to each other with a bungee or some rope.
***UPDATE 15.04.26 - Included Models with wider holes for the nail to make fitment easier. A small tool to help you to remove the bottom part of APS-Shells.
1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and the back part to the main body. Comes in two versions: IV turret VI turret To scale a model from 1:200 to 1:144, you need to use…
no need to take off lid for water filling no rattling like the original metal lid printing: due to not so high temperatures in that coffe machine section, PLA is sufficient (PETG better) don't need to add supports for door rails (but for…
Pictures have been added! If you wanted to print it the same size that I printed at use 30% In a bamboo lab slicer.
You can scale down this model to 30% in the bamboo lab slicer and that is the size that I printed them at.
Desktop Tank Model A clean, modern armored tank designed to stand on its own as a decorative display piece. This model is perfect for desks, shelves, pianos, or any flat surface where you want a subtle mechanical accent. The tank features…
Since I'm currently finishing off the building of my The100 tank 3D printer and using this electronic tray, I've designed this custom-fit cover/lid for it. This design ensures your electronics are protected from dust and debris . The…
This is a low poly model that I created in Blender. It's my first real creation and it turned out pretty good in my opinion. I thought that I'll share it with the world. Printed on a Prusa Mini+ with PLA. The stls are not scaled properly…
This spacer raises a light similar to a Hyger aquarium light up by about 3 inches. Fits the 20 gallon tall rimmed tank.
A much easier to use hand nut for the top lid of a Camco Propane Tank Added two versions that use a heatset thread insert (M5x9.5) - https://www.amazon.com/ruthex-Threaded-Insert-Pieces-Ultrasound/dp/B07YSVXWS8/ref=sr_1_1_sspa?th=1
A relative brought me the broken handle bracket of his Thetford C220 cassette toilet tank (ref photos). This part is not available separately from Thetford who supply it only with a complete tank. I had only a few broken bits to work with…
I made a tank track for 1:70 scale tanks, or models that I print from other people, that I just scale down. it should be more reliable and easier to print with .4mm nozzles. The people that i print from are Bavaria_3DTanks, mikolaj.mazik,…
INTRO Meet the DEFENDER; A tanked UGV. Measuring: 890x740x660mm ( LxWxH ), & powered by 2 BLDC drills; This completely 3D printed ( with the exception of the 2040 extrusions for structural support ) UGV can handle whatever you throw at…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
I made all of these as part of a school project. They all work great, and the tank is thriving. I’ve included all SolidWorks files so you can make the entire project as well as change dimensions. You also need to buy a number of parts off…
Battery holder for RC trucks / Offroaders, designed to look a bit like a fuel tank. Holds a 75mm/35mm Lipo or other battery type. Requires 2x m3 Bolts and Nuts. Should probably be printed without supports , the little handles get…
The 100 Tank Plug Mount – Back Side is a robust rear-side holder engineered to securely fasten plugs, cables, or auxiliary modules to the 100 Tank system. Its optimized geometry offers excellent stability while reducing vibration, helping…
If you like this model please give it a like and download so I can make more! This converts a common 5 gallon detergent tank into a fuel tank with a Midwest Can compatible cap. The containers might be called: 5.3 Gallon Tighthead | Carboy…
Supports are required. I printed it with high layer height cause I needed it urgently but for accurate result I recommend low layer height (0.1-0.15mm) and also adding fuzzy skin feature inside the little outlined box thingy makes it…
This isn't mine all credit goes to tim morris THE ORIGINAL CREATOR the picture is a real boley and isn't 3d printed
The model is intended for display, dioramas, and historical projects . It’s suitable for 3D printing and works well as a decorative piece for collectors or WWII-themed scenes. This is a static model only , made for visual and educational…
Tired of the suction cup always falling off the fishtank glass?
This is a slim water tank I designed to fit inside the Toyota Prado rear door cavity. It can be used to store non-drinking water and used for handwashing, cleaning, etc. It should fit on any J150 Prado (roughly 2009–2023) if the rear door…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Legendary US army M3A1 Stuart resin scale model kit. I recommend printing the adjusted tighter tolerance tracks.
Cover of the master brake cylinder expansion tank for Dodge Journey
The Volvo diesel filler neck jams in winter if water gets into it. This simple cap prevents that.
I use a water cooler at home. One feature I love about it is that I can run to the store and fill up my water cooler tank for really cheap, and then take it home to load into my water cooler unit. For those of you unfamiliar, you puncture…
I like to play paintball playground in VR but did not want to pay for an attachment to screw my tank onto my VR controller so I made a model to 3d print one. I tried to make it as close to the original quest 3 controller body as I could.…
i made this tank for my other model that slips on your VR controller. Disclaimer I have not printed this yet but the tolerance is designed for 0.1mm so it should all fit together well. the reg on the tank is a model of the powerhouse hook…
made this for my other model that slips-on to your vr controller. disclaimer this has not been printed but it has 0.1 tolerance and i have included a .step file so you may edit the tolerance to your 3d printer in cad software. the reg on…
Multicolor Printer Required Layer Height: 0.16mm or 0.20mm for the best detail on the text. Walls: 3 Wall Loops to ensure the outer "rim" is durable. Infill: 15% Material: PLA for standard use or PETG/ASA if you plan to use it for hot…
The Vaporesso armour G/GS tank box features a compact and sleek design ideal for securely holding your vape tanks. The hinged lid with magnets ensures easy access and secure closure. Designed to store and protect Vaporesso tanks, this box…
The lid fits a 6 inch wide circular tank, the base fits a 2.75 puck light
Model primárně pro Bambu slicer - zde je vhdné obarvit pro valnetýna horní embosované vrstvy do červené nebo růžové.
There are commercially available agitators that rotate the developing tank while it lies horizontally on motor‑driven rollers. With this type of system, continuous rotation is mandatory, because part of the film spiral always remains…
a flay benchy that i printed with pla sorry cant get real pictures on here
A touch of Zen for your tank: this Japanese Torii Gate Aquarium Hide offers both tranquility and utility, making it the perfect feature piece for any aquascape or terrarium setup. Designed with shrimp, small fish, reptiles, amphibians and…
This is a High detail version of my previous 3d model of the RTX-65 Guntank from the Gundam: The Origin Manga and Anime. It's designed and already scaled to be printed at the scale of a regular High Grade figure (1/144). Over the past 4…
Printed this on a Creality K2 Pro with Creality Hyper PLA in Black, Blue and Orange. I used the default settings for the filament and print settings, just removing the brim option. The model is designed to take a Cerbo GX and a GX…
Benchy boat based on a tank with missiles and a missile container in the back. Also contains tank tracks.
This adapter is specifically designed to make the Givi BF25 tank lock system compatible with the Aprilia Tuareg 660 . It serves as a bridge between the bike's tank and the Givi flange. ⚠ IMPORTANT INSTALLATION NOTES: Screws: To install…
Overview Because sometimes a bookmark just isn’t enough — you need a cat in a tank to guard your place and roll you into the next chapter. This Hueforge-style bookmark is a crisp, high-contrast relief print that looks great poking out of…
This is a toy train tanker car for a kid who's going through a rough patch. Aside from the locomotive, there is also a tender, box car, hopper, tanker, flat car and caboose. There are provisions to put a switched LED on the nose of the…
Replacement fuel tank grommet for Cub Cadet M60 Tank lawn mower. Mine cracked so I made a replacement. Print with TPU I found it easiest to press the grommet into the fuel tank first, then push the inlet tube into the grommet.
This Tank Benchy is a creative version of the classic 3D printing boat, redesigned with tank tracks and a small turret. The model keeps the familiar Benchy shape but adds a rugged, armored look. It is made as a single-color print with…
I haven't been able to test this print as I don't have a GX Touch 70 if someone could confirm the size fit? The model is designed to take a Cerbo GX and a GX Tank-140 on the inside and a GX Touch 70 mounted on the front. I will also make…
Permet de maintenir le levier de frein serré à l'arrêt
I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance. After hand tightening the nut, you're supposed to turn the nut an additional quarter…
Sci-Fi Fluid tank that can hold a miniature, add transparent plastic and you got yourself a great piece of terrain
HAW206 Spider Tank 3D print model based on 'Tachikoma File' original artwork. Updated to REV3, model has been updated to be closer to the GITS SAC animations rather than the 'Tachikoma File' original concept sketch, there is much more…
This is a simple indicator float for concrete water tanks. A 25mm hole is cut in the lid, in this case a PVC access port. The sleeve is siliconed in. The float is put on the end of some 20mm PVC pipe and the indicator on the other end.…
TPU I used a heat gun to warm them before installing. They become quite pliable. Unsure about longevity. May have to test different infill %
We recently acquired some aquatic pets. I have been learning about consumer-grade aquariums. Apparently, a popular way to cover the top of an aquarium, to prevent things from falling in, is to use "egg crate" lighting panels. The plastic…
This is a remixed version of M. Bergman's very nice Valentine IX/XI tank model. In order to more easily print it on my Mk4, I split the model into several pieces, and arranged them in a way that I thought appropriate. I also re-scaled it…
Use these to cover the fuel gauge sender hole and the fuel pump hole. Insert your preferred cleaning agent into the fuel tank and shake.
Features: -Fits Rush Solo Max (It can also be used for other VTX units) -For 20x20 mm mounting -Small and lightweight -Easy to print -No supports needed Mounting: -You can attach the VTX using double sided tape or two zip ties. Print…
Use a 27mm long filament chunk to attach each individual piece together Print as many as pieces you want, the more you print the longer it will be. I recommend printing at least 7, and the end pieces are optional I printed with a layer…
A horizontal HO scale (1:87) 500 gallon propane tank for trackside communication hut emergency / backup power. Print in either white or gray PLA. No supports required.
Top tank with opening for launch lug for Outlander model rocket. 1:1 scale with Estes Outlander. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Category: Hobby
End cap for the four BT-50 size tanks on Outlander model rocket. Printed on glass for smooth outer (end) surface. 1:1 scale with Estes Outlander. End cap fits inside Estes BT-50 body tube. BT-20 size for the eight BT-20 Outlander tanks is…
End cap for the eight BT-20 size tanks on Outlander model rocket. Printed on glass for smooth outer (end) surface. 1:1 scale with Estes Outlander. End cap fits inside Estes BT-20 body tube. BT-50 size for the four BT-50 Outlander tanks is…
I made the tank and the reg able to take filament. That blue is just TPU.
