1 / 3
Lominie A20 Tank Clamp Sleeve — zdjęcie 1
1 / 3

Lominie A20 Tank Clamp Sleeve

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A sleeve to protect rimless tanks from metal bracket and capillary action.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
91
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution

While I'm sure it was fine, the idea of metal on glass made me uncomfortable, especially under a clamping load. I also noticed there's potential for water to find its way out of the tank via capillary action and I wanted to prevent that (hence the bumps in the sleeve).

I'll be creating one for the A120 next as I can't find one for those either. 

I printed in PETG. I also attached the bgcode for a .2 speed profile and it printed in about 25 minutes (note this was sliced with an MMU MK4S as I prefer the starting macros to prevent oozing). No supports needed in the standard orientation. 

Tagi