1 / 3
Lominie A20 Tank Clamp Sleeve — image 1
1 / 3

Lominie A20 Tank Clamp Sleeve

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A sleeve to protect rimless tanks from metal bracket and capillary action.

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
92
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution

While I'm sure it was fine, the idea of metal on glass made me uncomfortable, especially under a clamping load. I also noticed there's potential for water to find its way out of the tank via capillary action and I wanted to prevent that (hence the bumps in the sleeve).

I'll be creating one for the A120 next as I can't find one for those either. 

I printed in PETG. I also attached the bgcode for a .2 speed profile and it printed in about 25 minutes (note this was sliced with an MMU MK4S as I prefer the starting macros to prevent oozing). No supports needed in the standard orientation. 

Tags