Counting matching models…
A retaining wall for the corner of your planted aquarium. Holds back substrate to create a layered effect with deep substrate your plants will love at the back and plenty of room for fish and shrimp activities at the front. The dimensions…
My sponge filter was a little too loud for me, so I developed this diffuser to reduce the volume a little. The air bubbles are reliably broken up and the bubbling has become much more pleasant for me. The diffuser was designed for a 16mm…
Made a little arm to prop up my aquarium lid when doing water changes. I use egg crate diffuser as a lid for my aquarium but it's a hassle to move out of the way because I have plants growing through it. Nice and sturdy. Easy printing…
Designed to hold 12.5mm diameter probe on 6mm glass. Original printed from PLA, but i suggest using PETG or something else a bit more flexible than PLA.
Hello ! If you like my work, please rate it. A group of more demanding shrimp kept in a small aquarium needs several types of ingredients. Standard food, mineral food, mineral powders, various granules, baby shrimp food, powder-based…
Hose Clip / Clamp Range – 10 mm to 38 mm – Washing Machine, Garden, Aquarium & More A simple, reliable hose clip for a wide range of common household hoses and tubes . Originally designed to secure a washing machine or dishwasher drain…
Zoolek and JBL aquarium water test tubes holder for 2, 4, 8 and 12 glass tubes.
Just lie out the moss on one layer, top it with the other and connect the two with the clips
No supports and No glue - post fits snug in base. Disclaimer: Fish not guaranteed to understand the game... but you can patiently watch for the thrilling moment they might score some points! :) A few different options available: Ring…
This spacer raises a light similar to a Hyger aquarium light up by about 3 inches. Fits the 20 gallon tall rimmed tank.
Designed in thinker cad For my aquarium so I could feed my fish(guppies) and the food don't scatter everywhere. printed in a Ender 3 V2 Neo on PLA 0.14mm layer height on a 0.4mm nozzle No supports needed print at 100% for a 6 cm hole on…
Top section is a bacteria habitat: place a coarse sponge in this section and clean it with proper caution in exceptional cases only. Bottom section is for mechanical water filtering: place a soft sponge there and clean it whenever you…
6 pieces from frag plug flower and 1 from frag plug flower 1.1 pet g Enjoy!
Labeled test tube stand that fits API test tubes with the pop caps provided with the API Master Test Kit for freshwater tanks. Two models provided labeled horizonally from front to back 1, 2 & 3 and 4, 5 & 6. Please choose the correct…
ein Ring der auf der Wasseroberfläche schwimmt und das Futter an einer Stelle hält.
This is a filter intake designed to fit aquario neo 12mm lily pipes. It specifically fits onto 13.2mm OD. The goal is to reduce suction at any particular area while also having very small holes to be shrimp safe. Pic added so you can see…
Spray bar attachment designed to fit aquario neo lily pipes 12mm. Designed for low flow for shrimp tanks. The actual dimensions it fits is 13.2mm OD. I have two iterations of this, one with some additional reverse nozzles for even lower…
Poznámka: Český popis naleznete níže. English: Introduction I have been working with nano aquariums (20–30 liters) for nearly 20 years . From the beginning, I was dissatisfied with the lack of an internal filter that is simultaneously…
AQUARIUM PORTAL A square, open-frame aquarium portal designed to hold a glass or clear acrylic panel on one side, allowing distortion-free top-down viewing of the aquarium. The transparent face cuts through surface turbulence, giving a…
The Lifegard Aquatics 5 Gallon Bookshelf Aquarium (15.74"×7.87"×9.84") is great for nano-scaping. This 3D-printable lid is designed to solve the common frustrations of the typical glass lid by addressing cable management and gas exchange.…
couldn't find a plant holder for holding cuttings were there is a little more stem making it difficult to put it in the water and prevent stem rot .this holder holds both sides of the stem preventing root rot Category: Hobby
This is a custom bloodworm feeder I made for my aquarium. It’s roughly 6x7cm and fits most standard 5mm suction cups . What makes it work well is the slat design: they start at 4mm wide at the top and taper down to nothing at the bottom ,…
Used to install hardline (acrylic) airline tubes to polycarbonate lids for fishtank breeding projects. Designed for 3mm ID x 5 OD tubes for use with standard airline tubing (4mm ID x 6 mm OD) Comes in two pieces for easier maintenance of…
A cave designed to fit in the corner of an aquarium. Dimensions are W: 154.2mm L: 154.2mm H: 73.6mm Top entrance holes diameter is 57.15mm
Ever get tired of looking at the air hoses in your tank? Ever try burying them under the sand/gravel, but they just pop back up? Clip one or more of these handy sand anchors to your air hose, and bury it under the sand/gravel. Your hose…
Alternativ holder for the Chihiros A2 Series. The light can be folded up to maintain the tank easily. The bracket is designed for 5mm glas. Please notice that some parts need to be printed twice - once original, once mirrored. Needs a few…
A touch of Zen for your tank: this Japanese Torii Gate Aquarium Hide offers both tranquility and utility, making it the perfect feature piece for any aquascape or terrarium setup. Designed with shrimp, small fish, reptiles, amphibians and…
18mm hose support to stop kinking for maximum flow. PETG, printed in edge to minimise supports. Shock cord to reduce vibration transfer, zip ties to secure. Freecad drawing .
Designed for use with polycarbonate sheet lids to make it easier to feed your fish or for maintenance. This hinge was developed for 4mm polycarbonate sheets in mind however the f3d file is provided for edits. This hinge is a fully…
Crevasse tool for aquarium siphon. Fits over the nominal 50mm tube of the siphon so you can clean in the corners. Prints without supports. Note you should start the siphon and attach this under water, if you try and fill the siphon tube…
Key Features: Corner -mounted or substrate- buried placement Interior viewing access Fish and shrimp hideout filament: PETG This is an original 3D-printed aquarium rock designed to be placed directly against the glass of your fish tank.…
This filter guard has octagonal holes with a diameter of 1mm (maybe a bit smaller in the real print, depending on your printers accuracy). The dimensions overall are 102mm*50mm (the smaller one 92mm*50mm*). It fits on pipes with a…
Aquarium feeder holder for the Juwel EasyFeed The feeder is meant to be used with Juwel Aquariums with a lid. The modern aquascaping/planted aquariums look so much better with an open lid and I needed something for the feeder to sit…
A feeding port for polycarbonate lids. Just drill a 2" hole into the front middle of your lid and pop the feeding port in. For the feeding port rim I'd recommend printing with 4 walls, but for the plug I would use 2 walls and a lot of…
The design was inspired by the Baiosphere Terrarium Lamps. I ended up using some standard LED round module directly connected to a dimmable USB cable, but if you know your electronics better than i do i included a model with a hole for an…
Super simple, super usefull razor scraper. I do use Wilkinson sword razor, 7mm aluminium rod, 2,5mm stainless bolts. Print as on photo, no supports needed, ideally PETG, 100% infill, 10mm brim. Screw will make the thread itself. Enjoy!
Dieses einzigartige, organisch geformte Riff bietet deinen Fischen und Garnelen ein komplexes System aus Höhlen und Durchgängen auf mehreren Ebenen. Das Design erinnert an natürliche Korallenstrukturen oder Unterwasser-Felsformationen und…
Inspired by cozy hobbit-style hillside homes, this fantasy shrimp house blends naturally into planted aquariums. Bring character and functionality to your aquarium with this Neocaridina Shrimp House , a detailed 3D printable shelter…
Inspired by cozy hobbit-style hillside homes, this fantasy shrimp house blends naturally into planted aquariums. Add a touch of fantasy to your aquarium with this Neocaridina Fantasy Shrimp House , a detailed cottage-style shelter…
Edit: new file where both parts lay flat on the buildingplate. Two parts moss grid for aquariums. Just place inside or add a suction cup. I used PETG and 0.4/2mm.
The original intake screen for my aquarium filter was getting clogged often, i made this so i could swap it out quickly. This one has worked so well at not getting clogged i haven't had to remove it to clean yet. This was designed with…
Clean up your setup with this perfectly-fitted Air Stone Holder Suction Cup Clip, Keeps Stone In Place, Aquarium Or Reservoir Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File…
A unique 3D printable creation — this Dragon Skeleton Bones Aquarium Decoration, Ribcage Swim Through, Fantasy Fossil Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
A unique 3D printable creation — this Dragon Skeleton Bones Aquarium Decoration, Ribcage Swim Through, Fantasy Fossil Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
This is a remix of a plant holder @EricDoughty_857131 made. Made for 8mm thick glass with added flow at the bottom.
Too many Shrimps? Want to sell them or give them to your friends? Hard to catch them, right? Here you have 3 different versions of a shrimp trap I have design and perfected throughout the time that I'm now sharing with you, for you to…
An easy way to feed small fish and shrimps using frozen or live food. Printed with PETG using minor supports (already in 3mf file) Make sure to clean your printed feeder thoroughly before use, especially if you are experiencing stringing…
I made this for my aquarium since it was cheaper than buying a dedicated light. Simple and open, slide them so they hold any light size, they are very tight so measure your aquarium rim to see if they fit. The holder is 8mm wide, 18.8mm…
Simple model to mount an aquarium light to the rim of the tank. Through hole is 1/8in. Included an f3d file so you can modify it however you want. It has two pegs, one that goes all the way through to allow for height adjustment and one…
The lampshade is printed from transparent plastic. It is strictly forbidden to use powerful lamps, over 15 watts. The lampshade is necessary to prevent oxidation of the lamp socket contacts.
Used very small holes. Might be to small. Will find out soon enough. Printed in PLA with 0.12 Layer height.
Threaded connector for pumps for aquariums, fish tanks, ponds, and fountains. Connector with M20 thread and 15mm outlet diameter. Check out my other models. Przyłącze z gwintem do pompy do Akwariów, Zbiorników Rybnych, Stawów i Fontann.…
Transform your aquarium or terrarium into a striking natural landscape with this large corner cave hide, designed to maximize usable space while creating a bold visual centerpiece. This design blends seamlessly into sandy or rocky setups,…
Luftheber und Bogen für Standard-Kuststoffpanzerrohr 16mm / 13,4mm. Bei mir sitzt es gut. Falls nötig mit Wärme oder Silikon einpassen. Gedruckt mit 0,2mm und 100% Infill. Air lifter and elbow for standard 16mm/13.4mm plastic armor…
A Mayan pyramid-inspired aquarium ornament made in a detailed 3D printed style, featuring stepped temple architecture, carved stone-like texture, and an open passageway for added visual depth. This decorative piece brings an ancient ruin…
Diese moderne Aquarium Höhle bietet Fischen und Garnelen einen sicheren Rückzugsort und sorgt gleichzeitig für eine stilvolle Optik im Aquarium. Durch die organische Form mit mehreren Öffnungen können Fische problemlos hinein- und…
Keep your aquarium surface organized! These custom floating rings create "clear zones" on the water surface, preventing floating plants from covering the entire tank. Perfect for maintaining open areas for light penetration and easy…
Dieses detaillierte Schiffswrack für Aquarien ist die perfekte Kombination aus Deko und Funktion 🐠🌊 Das Modell bietet zahlreiche Öffnungen und Verstecke, wodurch sich Fische sicher zurückziehen können. Gleichzeitig sorgt das realistische…
plant basket for Aqueon aquarium it uses the plastic bezel that goes around the top of the Aqueon aquariums for support.
Put your shrimp to work in the mines! JK, give them a place to hide while decorating your aquarium. There are two versions, one with retaining elements to keep substrate out of the cave, the other has a flat roof As with our other…
Update: Made the neck longer for an easier time screwing the jar on and off Widened the neck so that it rests on the build plate during printing Cleaned up the CAD Hang-on-back inverted aquarium that uses a wide mouthed ball jar. Since…
Transform your aquarium or reptile enclosure into a hidden underground world with this Atlantis inspired catacomb hollow cave system. Designed to provide secure hiding, breeding and exploration spaces for shrimp, fish, reptiles or small…
DE Beschreibung: Passend für das Eheim Aquarium-Set Aquastar 54l. Ein Schnellöffnung Deckel um nicht den ganzen Deckel des Aquariums öffnen zu müssen. EN Description: compatible for the Eheim Aquastar 54l aquarium set. A quick-release lid…
Hello, to download the fan holder 120mm for water cooling in the aquarium, the holder is for glass mounts, for a slim 120mm fan: http://s.click.aliexpress.com/e/i3OzoW4 http://s.click.aliexpress.com/e/Kipj37i to download versions for…
Hello, to download the fan holder 120mm for water cooling in the aquarium, the holder is for glass mounts, for a standard 120mm fan: http://s.click.aliexpress.com/e/ZEllcLO http://s.click.aliexpress.com/e/Kipj37i to download versions for…
Used like staples to anchor light plants to the substrate. Designed for use on small gravel but might work for others as well. Print with 100% infill (solid) so it doesn't float, then use it to clip down plants like guppy grass or java…
A simple "hook" to hold your flexible PVC hose in place over the lip of the aquarium when filling the tank. Clips are of size to hold a PVC hose of 18mm diameter. Model can be scaled up/down to fit hose of a different size. The diameter…
A simple yet effective water-resistant holder for a 10W cob LED light which can be mounted with M3 screws to a lid or something. I created this for my aquarium since the original light broke and other lights I tried didn't resist to…
My fish tank came with a very small glass lid. I wanted to cover most of the tank while still having quick access to feed the fish so I cut down some scrap acrylic and modeled this hinge to clip the acrylic panel onto the existing glass…
A caddy I built to hold my API testing equipment. It is a three part build. The handle is printed separately and then glued to the body. I used overture PLA professional. Great little storage device. Beats the one that the test equipment…
This is a bracket for a Fluval A14772 LED strip for aquarium. The holder fits on the original Fluval Flex tank. Category: Pets
Somewhere to keep your BiOrb MRC light control safe. Also has a recess for a feeding funnel… https://www.printables.com/model/709543-feeding-funnels-for-biorb-aquariums Locations on the base for 8mm rubber feet.
This is the voronoi edition of my cover system for Juwel Rio 125 fish tank. For further parts and instructions look here: https://www.printables.com/model/684272-modular-lidcover-system-for-juwel-rio-125-led-aqua See also my other fish…
If you have an aquarium then you understand the struggle to manage and bend cords. This print safely routes wires over the top of the tank with a visually pleasing, smooth bend. Revision 2 Revision 2 adds cord keepers with different…
print settings - perimeters- 0 bottom layers - 0 upper layers - 0 fill type - giroid fill density- 30% (fill density can be changed according to requirements) the size of the bioball can be changed as required. bacteria settle reliably in…
This cave is the perfect addition to your aquarium. Just press it against the glass of the aquarium and cover it. The fish will have a hiding place and will be beautifully visible. An excellent trick for your ancistrus, who often breed in…
Bubbles going up in tube with water. Water is drawn in stones and plant roots. Dirt stay here to feed the plants. You have to buy transparent plastic tube separately
This are active cooling parts for my cover system for Juwel Rio 125 fish tank. For further parts and instructions look here: https://www.printables.com/model/684272-modular-lidcover-system-for-juwel-rio-125-led-aqua See also my other fish…
Wide, save stand for 60mm Co2 bottle (e.g. SodaStream) for aquarium Co2 systems Opening diameter: 61mm, stand diameter: 120mm, height:100mm *if you have a smaller Co2 system, you can scale it down to 80mm Easy to print and with a fast…
Easy to print, no support cave with window, for shrimps and small fish with window
This is a holder for 8025 Cooling fans. The bracket and screw works with all glass from 2-13mm. Each Holder needs 3 screw to complete the build. 2 Screws are enough if the wire management cover is not used. 1 DC Connector Cover is needed…
