1 / 2
Watertap Tube for Rainwater Tank / Auslauf für Regenwassertank — zdjęcie 1
1 / 2

Watertap Tube for Rainwater Tank / Auslauf für Regenwassertank

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for worn Tube

Ocena
0 / 5
Polubienia
1
Pobrania
64
Wydruki
0
Wyświetlenia
356
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I couldn't get a new one at the hardware store, so I made one. Works very good and last now for several years.

I think PETG would also work well, I used ABS because I wanted to try the material.

Minimal support needed by rotating the tube at 45 degrees. No supports inside the tube or at the visible outside which makes a nice finish.

-----------------------------

Das Teil gab es nicht zu kaufen, aber ich wollte nicht den ganzen Wassertank austauschen. Also habe ich ein neues Auslaufrohr entworfen und gedruckt. Funktioniert super und hat inzwischen schon ein paar Jahre auf dem Buckel.

Ich hab es in ABS gedruckt, denke aber PETG tut es auch.

Supports sind nur unter dem Anschlußflansch notwendig wenn man das Rohr um 45 Grad kippt, so ist kein Winkel unter 45 Grad.

 

Tagi