Watertap Tube for Rainwater Tank / Auslauf für Regenwassertank
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.20 – €5.13 net (excluding VAT)
For file: Wasserhahn_0.2mm_ABS-T_MINI_4h57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.66 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 4.95 hr
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement for worn Tube
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 64
- Makes
- 0
- Views
- 356
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't get a new one at the hardware store, so I made one. Works very good and last now for several years.
I think PETG would also work well, I used ABS because I wanted to try the material.
Minimal support needed by rotating the tube at 45 degrees. No supports inside the tube or at the visible outside which makes a nice finish.
-----------------------------
Das Teil gab es nicht zu kaufen, aber ich wollte nicht den ganzen Wassertank austauschen. Also habe ich ein neues Auslaufrohr entworfen und gedruckt. Funktioniert super und hat inzwischen schon ein paar Jahre auf dem Buckel.
Ich hab es in ABS gedruckt, denke aber PETG tut es auch.
Supports sind nur unter dem Anschlußflansch notwendig wenn man das Rohr um 45 Grad kippt, so ist kein Winkel unter 45 Grad.