Print in place tank body (FAB365 style)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EXTREME3DPRINT made a great moving tank chassis, but it had no body. So I designed my own Metal Slug/FAB365 style tank.
- Ocena
- 4,882 / 5
- Polubienia
- 420
- Pobrania
- 1721
- Wydruki
- 18
- Wyświetlenia
- 10 370
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
The articulated tank chassis by EXTREME3DPRINT is available for purchase here: https://cults3d.com/en/3d-model/gadget/pipbot-1-print-in-place-robot
Inspired by the models from FAB365: http://www.fab365.net/
My design process is covered in this video:
I normally would link to my source CAD for remixing convenience, however the tank chassis is a paid model so I cannot. Two STEP files are provided instead.
Print instructions
As far as print in place goes this model is not very challenging (especially compared to the tank chassis it sits on). I used PETG on the Bambu Lab P1P. The steepest overhangs are only 45 degrees and clearances are set to 0.3mm. The most challenging part is probably the the adhesion of the turrent base to the bed, which has the chance to be knocked loose during printing.
Assembly
Fold into shape, and then use 2 x 12mm M3 bolts to attach the body to the chassis. I drilled the chassis bore with a 2.5mm drill bit to help the M3 bolts cut their own thread.