RC Tank T-34 PS. 231-1 Part 1 Tracks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tracks assembly is the most challenging part of assembling this tank.
- Ocena
- 0 / 5
- Polubienia
- 79
- Pobrania
- 631
- Wydruki
- 0
- Wyświetlenia
- 6089
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have always been interested in technology and as a child I dreamed of different types of tracked vehicles. During my studies in recent years, I had to study 3d modeling and the school also had a 3d printer at my disposal. I decided to combine these things and here is the result.☺
https://youtube.com/playlist?list=PLcrufmroGYFnFEDnIxH_HovsyGvH1X6Ub
Note the project is not 100% complete. Some small things are in progress and there is plans for fpv cameras and ir cannon. ☺
I published this project in several parts to make it easier to manage. This is the first part and below is the BOM and assembly video for this part.
You will need 1.2mm steel wire (~132pcs) 29mm long pieces to assemble tracks.
Assembly https://youtu.be/caIMEeMsLJI
Here are other parts of the publish.
Part 2 https://www.printables.com/model/99930-rc-tank-t-34-ps-231-1-part-2-wheels-and-support-ar
Part 3 https://www.printables.com/model/100792-rc-tank-t-34-ps-231-1-part-3-frame
Part 4 https://www.printables.com/model/102041-rc-tank-t-34-ps-231-1-part-4-turret
Part 5 https://www.printables.com/model/101845-rc-tank-t-34-ps-231-1-part-5-body-shell
Part 6 https://www.printables.com/model/116906-rc-tank-t-34-ps-231-1-part-6-dual-differential-gea
Part 7 https://www.printables.com/model/117478-rc-tank-t-34-ps-231-1-part-7-main-gearbox
Part 8 https://www.printables.com/model/118323-rc-tank-t-34-ps-231-1-part-8-main-motor
BOM
-1.2mm steel wire (~134pcs) 29mm long
-1.5mm piano wire for torsion springs. Two meters should be enough.
-4mm shaft 22mm 2pcs
-5mm shaft 99mm 1pcs
-5mm shaft 24mm 1pcs
-5mm shaft 33mm 2pcs
-5mm shaft 60mm 1pcs
-5mm shaft 86mm 1pcs
-6mm round shaft Length 80mm 2pcs
-2030 size brushless motor 4800 - 5200kv
-3650 10.5T size brushless motor (sensored works better)
-Motor controller “ESC” for main motor
-Motor controller “ESC” for steering motor ote. The motor controller must have crawler mode. You don’t want to brake when you turn the other direction.
-Battery
-RC remote control Transmitter and Receiver
Bearings
-MF85zz 3pcs
-MR104zz 8pcs
-MF104zz 32pcs (or 24pcs printed abs bearings and 8pcs MF104zz)
-MR105zz 4pcs
-MF105zz 13pcs
-624 zz 4pcs
Screws
-M3 x 10mm screws ~50 pcs
-M3 x 16mm screws 4 pcs
-M3 x 20mm screws 2pcs
-M3 x 24mm screws 2pcs
-M4 x 30 screws 12 pieces
-DIN 916 M4 x 8 2 pcs
-DIN 916 M4 x 16 8pcs
-DIN 916 M5 x 10 or DIN 916 M5 x 12 2pcs
-12 piece M4 washer
-M3 washer DIN 9021 or similar 4pcs
https://youtube.com/playlist?list=PLcrufmroGYFnFEDnIxH_HovsyGvH1X6Ub
The project is not 100% complete.
Because of the Covid-19, I haven’t been able to print to school printers. Please donate to me and I'll buy my mk3s printer and finish the project.
The print settings are based on my memory images and may not be correct.