1 / 2
RC Tank T-34 PS. 231-1 Part 1 Tracks — image 1
1 / 2

RC Tank T-34 PS. 231-1 Part 1 Tracks

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tracks assembly is the most challenging part of assembling this tank.

Rating
0 / 5
Likes
79
Downloads
631
Makes
0
Views
6,089
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

 

I have always been interested in technology and as a child I dreamed of different types of tracked vehicles. During my studies in recent years, I had to study 3d modeling and the school also had a 3d printer at my disposal. I decided to combine these things and here is the result.☺

https://youtube.com/playlist?list=PLcrufmroGYFnFEDnIxH_HovsyGvH1X6Ub

 

Note the project is not 100% complete. Some small things are in progress and there is plans for fpv cameras and ir cannon. ☺

I published this project in several parts to make it easier to manage. This is the first part and below is the BOM and assembly video for this part.

You will need 1.2mm steel wire (~132pcs) 29mm long pieces to assemble tracks.

Assembly https://youtu.be/caIMEeMsLJI

 

Here are other parts of the publish.

Part 2 https://www.printables.com/model/99930-rc-tank-t-34-ps-231-1-part-2-wheels-and-support-ar

Part 3 https://www.printables.com/model/100792-rc-tank-t-34-ps-231-1-part-3-frame

Part 4 https://www.printables.com/model/102041-rc-tank-t-34-ps-231-1-part-4-turret

Part 5 https://www.printables.com/model/101845-rc-tank-t-34-ps-231-1-part-5-body-shell

Part 6 https://www.printables.com/model/116906-rc-tank-t-34-ps-231-1-part-6-dual-differential-gea

Part 7 https://www.printables.com/model/117478-rc-tank-t-34-ps-231-1-part-7-main-gearbox

Part 8 https://www.printables.com/model/118323-rc-tank-t-34-ps-231-1-part-8-main-motor

 

BOM

-1.2mm steel wire (~134pcs) 29mm long

-1.5mm piano wire for torsion springs. Two meters should be enough.

-4mm shaft 22mm 2pcs

-5mm shaft 99mm  1pcs

-5mm shaft 24mm  1pcs 

-5mm shaft 33mm  2pcs

-5mm shaft 60mm  1pcs

-5mm shaft 86mm  1pcs

-6mm round shaft    Length 80mm 2pcs

  -2030 size brushless motor 4800 - 5200kv

-3650 10.5T size brushless motor (sensored works better)

-Motor controller “ESC” for main motor

-Motor controller “ESC” for steering motor ote. The motor controller must have crawler mode. You don’t want to brake when you turn the other direction.

-Battery

-RC remote control Transmitter and Receiver

 

Bearings

-MF85zz          3pcs

-MR104zz       8pcs

-MF104zz       32pcs (or 24pcs printed abs bearings and 8pcs MF104zz)

-MR105zz       4pcs

-MF105zz        13pcs

-624 zz           4pcs

 

Screws

-M3 x 10mm screws  ~50 pcs

-M3 x 16mm screws  4 pcs

-M3 x 20mm screws   2pcs

-M3 x 24mm screws   2pcs

-M4 x 30 screws 12 pieces

-DIN 916 M4 x 8        2 pcs

-DIN 916 M4 x 16     8pcs

-DIN 916 M5 x 10 or DIN 916 M5 x 12    2pcs

-12 piece M4 washer

-M3 washer DIN 9021 or similar  4pcs

 

https://youtube.com/playlist?list=PLcrufmroGYFnFEDnIxH_HovsyGvH1X6Ub

The project is not 100% complete. 

Because of the Covid-19, I haven’t been able to print to school printers. Please donate to me and I'll buy my mk3s printer and finish the project.

The print settings are based on my memory images and may not be correct.