Panzer VIII "Maus" Tank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print Maus tank parts that can be glued together. Easy assembly. Remix of WindhamGraves' model.
- Ocena
- 4,893 / 5
- Polubienia
- 395
- Pobrania
- 5575
- Wydruki
- 29
- Wyświetlenia
- 18 086
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of the amazing Maus easy print model by WindhamGraves on Thingiverse.
I realigned the barrel with the turret and separated it for more reliable and cleaner printing upright without supports. Also cleaned up some geometry. The individual parts need to be glued together like on the pictures.
The shallower angle on the track pieces indicates the front. The fuel tank goes on the back with the lid towards the top. The turret support goes under the turret with it's short side toward the back. The front of the turret with the barrel is glued to the flat side of the turret.