616 modeli
Each file includes: - 1:60 scale model ship, assembled version .obj with .mtl color data - Bambu Studio 3MF with full color data for multi-color 3d printing - Full print settings are included in the 3MF file - Version with connecting…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
My favorite movie vehicle ever! DeLorean from BTTF and Ready Player One. www.youtube.com/wekster
Wydruk około 12,81 €–15,66 € nettoWstępna wycena jednego wariantu
Looks like the Rusty Bucket from Ben 10 but it's actually Eagle 5 from a Star Wars parody - Spaceballs! Check out my other stuff in my patreon page www.patreon.com/wekster and on my youtube www.youtube.com/wekster
Wydruk około 3,00 €–3,67 € nettoWstępna wycena jednego wariantu
This is a door-lock for ADRIA recreational vehicle (Camper) which as two parts, one to be mounted on the door (the male part - “Bloque porte ADRIA - Porte”) and the second to be mounted on the camper body (the female part - “Bloque porte…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena jednego wariantu
This is cargo load for the various vehicles I've created. Just to make it easier finding it all in one place. No support required. Diesel Generator you will need to superglue the bottom frame (very simple) Designed on Tinkercad. Enjoy!…
Wydruk około 12,61 €–15,42 € nettoWstępna wycena jednego wariantu
X-wing from Star Wars www.youtube.com/wekster
Wydruk około 12,31 €–15,04 € nettoWstępna wycena jednego wariantu
A simple model tank. It can be printed as one or two parts, print with supports on either way you decide to print it. I've included a couple of renders rather than photos because I haven't tested this model as of yet, but I will post…
Wydruk około 5,98 €–7,31 € nettoWstępna wycena jednego wariantu
This 3D-printed child seat is designed specifically for Playmobil cars, ensuring a perfect fit and enhancing the play experience. The model features a simple, toy-like design, without seat belts, that fits snugly into Playmobil vehicles…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Quick solution to hang LEGO vehicles on your wall by their wheels. I've seen others hang their cars but not by the wheels so I made this. I have designed the following hooks (the numbers can be found on the tires of the vehicle you want…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Does your child's ride need an upgrade? Do they drive their favorite power wheels all around the neighborhood, but don't have room for all their tag-along toys? Look no further than this awesome tow hitch receiver system (and adapter…
Wydruk około 11,26 €–13,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Freight Ten Recovery Vehicle as inspired by my four “Mongruxx” Novels. In love and war, both machinery and people break down. Having a recovery vehicle in your armoured column doesn't just make sense. It's criminal if you don't! Recover…
Wydruk około 9,40 €–11,49 € nettoWstępna wycena jednego wariantu
This Humvee started as a test in SolidWorks to learn how to make PIP (Print-in-Place) models. I used a photo reference to keep proportions as close to the real version of the vehicle. It's close to 1:100 scale. It has rolling wheels for…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Chibi version of D7 class Klingon battle cruiser www.youtube.com/wekster
Wydruk około 6,32 €–7,73 € nettoWstępna wycena jednego wariantu
Mobile Artillery Vehicle as inspired by my four “Mongruxx” Novels. Take to fight to them! Sit back in the distance and let it rain. Rain shells of death and destruction down on their worthless mutated heads! Protect your squaddies! The…
Wydruk około 6,28 €–7,68 € nettoWstępna wycena jednego wariantu
Not all interstellar or in-system cargo gets transported in military dropships, so I re-modeled this source design into a civilian drop shuttle for your all-purpose basic inter-orbital transportation needs, at 6mm scale (it could also…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Onkarkitekt presents a customisable Parametric EU/UK/GB Vehicle Registration Number Plate Fusion 360 file for custom 3 Dimensional registration plates
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
The standard adapters supplied doesn't fit the Mazda vehicles, as such I came up with my own. The supplied adapter allows you to fit the Trico wipers onto a Mazda vehicle. To fit the adapter you have to first remove adapter piece C, then…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Bio Pod Personnel Vehicle The stars won't wait, nor will the cargo inbound to your customers. Intermodel Cargo Pods are found on every planet in the populated universe and multiverse (universal quantum wave function, anyone?). It's how…
Wydruk około 10,33 €–12,62 € nettoWstępna wycena jednego wariantu
Freight Ten BullNose Recovery Vehicle as inspired by my four “Mongruxx” Novels. In love and war, both machinery and people break down. Having a recovery vehicle in your armoured column doesn't just make sense. It's criminal if you don't!…
Wydruk około 9,83 €–12,02 € nettoWstępna wycena jednego wariantu
EXTRA THICK Headlight adjustment base for various GM vehicles. Some vehicles have worn out adjustment base holes, this will have with some of that. Made these to fit my specific needs on a 1992 Camaro. Printed with Glow-N-Dark ABS,…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PETG/PLA Layer Height: 0.15 mm or less Infill % : 50+ Supports:No Print Orientation: Default as modeled Looks best with multiple colors at layer changes (no MMU required!) MMU makes the color changes…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena jednego wariantu
See my updated compact version , best for 1 pair of skis. I kept getting ads for “SnoStrips” , a kind of unecessary way to keep your skis upright when getting dressed before hitting the slopes. “$50?!” I thought - “I could make that.” And…
Wydruk około 8,44 €–10,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
was expanded from the original with a pressure shell. Since I couldn't print the steering wheel with supports to satisfaction. Printing without supports or anything like that. After the printing break, remove half the steering wheel and…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
It is my modification of https://cults3d.com/en/3d-model/gadget/smars-modular-robot . Chassis was changed to enable use two 3,7 V Li-ION batteries and some switches were added to enable select preprogrammed functionality. It is usefull…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Bij de kinderen zag ik deze vrachtauto liggen en dacht…..3D printer. Alle onderdelen worden apart afgedrukt. Ik ga ze lijmen, maar er zijn in de boven en onderplaat ook verstevigingen aan gebracht om er kleine vijsjes in te draaien. Ook…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
I increased the clip dimensions to allow for the thicker edge that I wanted it to slide onto in my Mustang Mach e. I also designed a slide on cover for aesthetic reasons. I printed the bin with a .6 nozzle to shorten time to print, but…
Wydruk około 2,33 €–2,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Magnet vehicle [UFO] created for a school project. It moves very nicely in all directions. Two magnets needed.
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
Ford Police Interceptor Utility Vehicle - Sun Visor fix. This vehicle has hide away lights attached to the sun visor. Old factory metal clip finally gave up with the extra weight of the hide away lights. This part was printed with…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Little Green Army Men : Vehicles : Himars
Wydruk około 17,68 €–21,61 € nettoWstępna wycena jednego wariantu
This is a scale model of a 4-post car lift for displaying different size diecast cars. This is an updated version of a previous model of mine but instead of using M3 fasteners to put it together, I made the tray and posts fit with a…
Welcome wastelander to my humble collection of Fallout vehicles! All of these models are scaled to approximately 1:50 (28mm) for skirmish games; they should fit well AS IS for Fallout Wasteland Warfare, or adjust them as you see fit.…
This print consists of three main components: White base plate, blue insert and black frame. While using Prusa Slicer 2.6.1 or later this leads you to the PS feature: "Add part → text". For German license plates (Kennzeichen,…
These are made to add to architectural models, in order to give them some ambiance, if you're an architect you'll understand the need for this kind of objects! The models were designed with simplicity, practicality and printability in…
to assemble you have to use m3 x 10mm screws
Bring the menacing power of the Empire to your desk with this incredible AT-ST Walker 3D print model that captures every mechanical detail of this iconic Star Wars vehicle. This meticulously designed STL file showcases the chicken…
This is a commissioned model designed for my wife. She likes to grab her coffee cup and hit the door when taking the kids to school, but her car isn't equipped to hold the typical ceramic coffee cup, or her water bottle, or her phone, or…
This is a fly rod holder I designed for my truck. It is fairly specific since I originally didn't plan on sharing the plans but after a couple requests I decided I should upload them, so the only downside is the mounting mechanism I…
Saraswati is the hindu goddess of knowledge, wisdom, learning, music and fine arts. She is seen carrying a “Veena” which is a musical instrument. This is a symbolic meaning which means to tune oneself into their own world of self…
Quick 3D model of TIV 1 I made 3D Printable, the mesonet is removeable so if you want it or not.
1/200 Tanks and vehicles pack] CountryCount 🇬🇧 UK18 🇩🇪 Germany41 🇷🇺 Russia7 🇺🇸 US31 🇵🇱 Poland4 🇫🇷 France3 Total104 Settings used: 0.15mm layers, vent open, loose fill, 4 layer surface, supports 3mm^2 x 80 degrees. (You can use 0mm^2 to…
A customizable keyring in the style of a EU/UK/GB number plate. These are perfect for labelling your keys, bag and other personal belongings. Use your slicer's 'pause at height' or 'filament change' feature to create multicolored keyrings…
This Humvee Model is in 1:100 Scale and replicates the look of a military Humvee. Its equipped with a 50 caliber machine gun. This model is ideal for use as a board game piece or tabletop model. Superglue may be required for assembly.…
Note: If you need a left mirror , just mirror the file in your slicer! If your mirror broke off, you can also contact Playmobil's customer support as they might send you a replacement part.
My son lost the trailer hitch (Anhängerkupplung) for his Bruder Wheel Loader. I took some measures and had a look at some images from the official replacement parts and designed this one in Fusion 360. There are two versions: One with the…
Update: 13.10.2026 – expansion of the list of supported and community-tested models. 6,10.2026 “Thanks to the community, the models have been tested — see details below. Thank you for the feedback.” @AGB84 - Golf 7 @rpeservis - Skoda…
Filament PLA Print in 0.3 100% infill need supports
Battletech stackable miniature storage tray Small 4x2 and 4x1, Stores 8 and 4 mechs or wider units like Aero/Vehicles Trays stack on each other It's stacking compatible with each other Fits all mechs if you want more storage density…
This is a model fighter jet I designed. This will require supports if you want to print it in one piece, although is still pretty quick to print. It is inspired by many real fighter jets/aircraft but this one is completely original.
This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…
Mounting clip replacement for the BMW E46 kidney grill. The kidney grills are held in place in the bonnet through flexible lips, which become brittle with time and heat exposure. My car is 14 years old and the kidney grills had lost their…
Kindle Fire Tablet 10 Inch (kids), Headrest, Car, Vehicle Mount, Designed for Vauxall/Opel, Zafira B, Astra G It may fit other vehicles with similar spacing of headrest posts. Printed in ABS to allow for a little shrinkage. I wouldn't…
Level up your sensory play! 🧱✨ These 3D-printed cube stamps are sized perfectly for toddlers and young children, these cubes feature deep-relief designs that leave satisfying impressions in play dough, modelling clay, salt dough, or…
Dar una pieza impresa a un niño o a un bebé conlleva ciertos riesgos. Si lo haces, es bajo tu responsabilidad y criterio. En el vídeo te explico cosas a tener en cuenta, materiales y cosas en cuanto a los diseños. Si quieres todos los…
This model had been exclusive to my Beta Squad tier on Patreon for some time and they will continue to have some exclusive parts and upgrades for it, but it's time I offer this up for everyone. I have made an assembly to guide to make it…
Just my design of a Vehicle registration Case (or in Germany "Fahrzeugschein-Schutzhülle"). It fits for the german "Zulassungsbescheinigung/Fahrzeugschein".
Overview This mount was designed to securely attach a Quest 3S headset to any vehicle, object, or robot. It was specifically designed for FIRST Robotics. Print Settings Tree Supports Build Plate Only 15% infill Prints best at 0.2mm layer…
I designed this because I wanted a more realistic tire model for my RC car designs. So here goes! The tire prints without supports and without infill when put on the side. With TPU it should take ca 10 hours per tire (0.3 Draft) . The rim…
A set of futuristic ground vehicles for a generic SciFi setting, at 6mm scale. This set is designed to match the SciFi Road set of parts I have uploaded. This set is intended to be compatible with the other 6mm SciFi terrain sets I have…
The well known RepRanger is now free for all! Pooch from Repkord commissioned me to design this piece back in May of 2019 to use as a promotional item for his BattlePak filaments (seen in the photo of the prototype, and they make the…
This set includes three compact “1:200-scale” models: the battle tank, the infantry fighting vehicle, and the self-propelled artillery. The miniatures in the set are my original designs inspired by modern warfare vehicles, but not…
My Chevy (Volt plug-in hybrid) has done me proud over the 9+ years of service, but it is starting to show signs of age. One of the little things that broke was my sun visor clip, so the visor swings back and forth depending on whether I'm…
My BMW E39 wagon (touring) was missing the plastic clips at both sides of the tailgate. These clips hold the plastic side covers in place. Since the original spare parts (BMW part number: left: 51498217213, right:51498217214) are way too…
vehicle or car scale model add on for aicraft painting stand https://www.printables.com/model/78565-aircraft-painting-s
Nov. 08, 2024 V1 Build 104: First release Prologue: NASA has launched the Artemis missions and plans to land on the moon again during the Artemis III Mission, hopefully in 2026. They have challenged the industry to develop and build a new…
This 3D printed Soviet-style GAZ-66 military truck features a rugged, nostalgic design inspired by historic off-road army vehicles. Perfect for collectors, tabletop gaming, war dioramas, or unique décor.
The most up-to-date model is HERE (Makerworld) Based on the “ SnoStrip ” but for us DIY folk, and not $50 ;) As a passionate skier and tinkerer, I modeled the SkiDock to share with fellow enthusiasts. This project is born out of my desire…
Battletech stackable miniature storage tray Small 2x2 and 2x1. Stores 4 and 2 mechs or wider units like Aero/Vehicles Trays stack on each other It's stacking compatible with each other Fits all mechs if you want more storage density…
So I loved the original idea for this dashboard for Gaslands vehicle setups, however I wanted to change some aspects and made a paper printout template as well since one was not included. Notable changes include dropping ammo blocks,…
I designed this Baofeng UV-5R Radio Mount, this is a combo with all 3 models to use with your molle, belt, or Ram mount. What is included: You will get the RX2301 which is what you need to attach to the radio. You will also get the RB2301…
Modeled after the Air Skimmer I made in middle school, I decided to recreate the model in an easily printable and reconfigurable design using OpenSCAD. Modify the OpenSCAD code and tweak the settings as you like. The hooks are used for…
Here comes the longer version of the Original Ultimate Ice Scraper from Genghis . This one is around 30cm in length, for vehicles with larger windshields. I printed this with 4 walls. No supports needed when printed upside down. Watch out…
"Vehicles" Cookie Cutter set (4 models) Cookie cutter is made of 2 parts - cutter and inner stamp. Parameters: Police Car Stamp - 60mm x 38mm x 4mm Cutter - 68mm x 47mm x 12mm Crawler Excavator Stamp - 58mm x 43mm x 4mm Cutter - 66mm x…
A set of futuristic ground vehicles for a generic SciFi setting, at 6mm scale. This set is designed to match the SciFi Road set of parts I have uploaded. This set is intended to be compatible with the other 6mm SciFi terrain sets I have…
Dies ist ein Remix von 3d-druckfactorys Scheune/Garage Die Garage wurde auf das Doppelte verlängert und etwas erhöht. Optional wurden seitliche Fenster eingefügt. Die Tore stehen jetzt offen. This is a remix of 3d-druckfactory's…
If you follow my blog or even my uploads here on Thingiverse you may have noticed that I'm a bit of a Disney theme park fan. So it may be no surprise that when I decided to try my hand at modeling something from reference images I chose…
Modeled after the original cap to print a replacement for a BMW E39 from 1999. Print in heat resistant filament like ABS or PETG. Fits E30, E39, Z4, and other models. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
SwitchRider - A nifty Nintendo Switch holder to let your Switch ride along with you in comfort. It was common that we drive on hours-long trips and share the Switch. This meant loading and unloading the Switch from its travel case when…
Print took almost 38hrs at .2mm layer height %15 infill using 297g of filament on my E5+, although it may take less depending how fast your machine is. I've uploaded 2 versions of this model, the model v2 doesn't have the part protruding…
Bring the intimidating power of the Empire to your desk with this incredibly detailed AT-ST walker 3D printable model that captures every mechanical detail of the iconic Imperial scout transport. This FDM friendly design prints…
Not my files. Reuploaded for my collection. Thingiverse thing:5333738 by Jaxes88
This is a wrenching competition game for kids and parents. The quickest wrencher wins! All joints are threaded, even the tyres. Two tools are available for assembling/disassembling the bolts and wheels. Playing Spread all parts on the…
The Scroggan Ambush Truck is a common improvised low-tech design found on many back-water planets that typically lack their own dedicated FightMech force or other standing professional militaries. The Scroggan Ambush Truck typically…
Introducing a versatile headrest hook designed to enhance your in-car organization. This thoughtfully crafted accessory offers a practical solution for hanging bags, groceries, or personal items on the back of front seat headrests. Easy…
This is the size I'll be using with my Dodge Ram remixed body ( I'm going to re-remix this body but that's another story !) The tire prints without supports and without infill when put on the side. With TPU (depending on the brand) it…
The perfect molds for your construction loving kids at the beach or sand bar. “I'm an excavator 🎶🎶” Ignite your child's imagination with our set of Construction sand molds. It's perfect for beach adventures or sandbox play. You do need to…
Uses the extra accessory slots that the BMW i3 has. **Updated the design to make it curvier and nicer looking. **Updated 2: added another version for those with the case on the key. I just bumped it up by 2mm on L&W. Let me know if that's…
Hi all, I made this to clip onto the back of a 2015 sierra seat, but I imagine it would work for most vehicles. it fits in a 220mm print space such as an ender 3, I recommend printing face down (with the clips facing up). print with clips…
Custom Front Wing and Rear Wing for Traxxas 2WD ONLY vehicles Provides adjustable downforce for speedruns! This is a pair of front and rear wings that have been designed to give adjustable amounts of downforce while producing very little…
This is a direct measured model of the stock door lock knob of a BMW F20 car designed on Autodesk Fusion. Used 70% of speed to get a very decent print. Print instructions Category: Automotive Print Settings Printer Brand: Monoprice…
This is the base model 4 door version of the VSV. Update 4/6/25: I was asked if I could split the rather long frame into two pieces for someone who was printing an upscaled version. So I split it added registration tabs to help line the…
A futuristic atmospheric jet for a generic SciFi setting, at 6mm scale. This is a quick remix and fix-up of another person's model (I've lost the link, but it was also on Thingiverse). I've re-scaled it for approx 6mm, corrected some…
The S.W.I.F.T. (forget what it stands for… named by Ryan Butram) was originally made available as a set of files included in a subscription box. Since then it has been an exclusive for my Patrons for quite some time. There is a gunner…
Scale 1:72 The model features a fully rotating turret mounted on a bearing for smooth movement, along with freely spinning wheels for added realism and playability. Assembly is simple and beginner-friendly: Glue the front and rear hull…
Apr 2026 - recently tried it on my wife's Mazda cx5 and that worked well too. Printed a vertically scaled model for a longer armrest, then crafted/sown together a larger pad, feels great! (Orange IRL pic is scaled up to about 245mm…
Tank platform TVP-1 (Tracked vehicle platform v1) Description Greetings to all robotics enthusiasts and 3D printing aficionados! I am excited to introduce my tracked platform model, designed to serve as a versatile base for various…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Witness the fallen giant of the Empire with this incredibly detailed crashed AT-AT Walker 3D print STL model that captures the iconic Imperial walker in its most vulnerable moment. This stunning Star Wars collectible shows the massive…
The set is made as an upgrade for the standard monopoly game. It contains 4 game pieces along with 3 different types of houses and 6 different hotels. These are based on the buildings located in the city of Prague (Czech republic). The…
![Magnet vehicle [UFO] - school project](https://media.printables.com/media/prints/510283/images/4135830_5b1d54d2-52ec-488a-baf5-14cae22a5c8f/img_0412.jpeg)
![Universal Vehicle Window Armrest [STURDY!] for Car Truck Van Sedan](https://media.printables.com/media/prints/b2f98d5e-8461-4564-9686-ca987c0a7d27/images/12573660_187261b7-cf9c-4bfa-97a2-c4caca94a7f1_74ab2709-3349-4fe8-91c7-fb1dc5b66efe/20260407_111147.jpg)
