Modified version of Trash Bin by mkd for Mustang Mach e, or other vehicles that have a thicker clip requirement.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Starting with mkd's excellent design, I increased the clip dimensions and created a cover that slides on.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I increased the clip dimensions to allow for the thicker edge that I wanted it to slide onto in my Mustang Mach e. I also designed a slide on cover for aesthetic reasons. I printed the bin with a .6 nozzle to shorten time to print, but also because I first used ASA-CF, which may clog a smaller nozzle. I later switched to PETG-CF, but then realized that the abrasive trash bin clip might scratch the interior of the vehicle, so I added a thin cork layer on the inside of the clip area. As a result, I would avoid CF and I think PETG would be adequate. The Mustang logo in the photo was simply glued on the cover.