Modified version of Trash Bin by mkd for Mustang Mach e, or other vehicles that have a thicker clip requirement.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Starting with mkd's excellent design, I increased the clip dimensions and created a cover that slides on.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
I increased the clip dimensions to allow for the thicker edge that I wanted it to slide onto in my Mustang Mach e. I also designed a slide on cover for aesthetic reasons. I printed the bin with a .6 nozzle to shorten time to print, but also because I first used ASA-CF, which may clog a smaller nozzle. I later switched to PETG-CF, but then realized that the abrasive trash bin clip might scratch the interior of the vehicle, so I added a thin cork layer on the inside of the clip area. As a result, I would avoid CF and I think PETG would be adequate. The Mustang logo in the photo was simply glued on the cover.