Quest 3S Headset Mount for Robots and Autonomous Vehicles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Quest 3S mount designed to securely hold a headset in place while allowing easy removal.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 399
- Wydruki
- 1
- Wyświetlenia
- 2343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
This mount was designed to securely attach a Quest 3S headset to any vehicle, object, or robot. It was specifically designed for FIRST Robotics.
Print Settings
- Tree Supports
- Build Plate Only
- 15% infill
- Prints best at 0.2mm layer height, although I've been successful printing at up to 0.42mm layer height
- Print with the flat plate towards your build plate
- Only tested with PLA, but should work with other materials
Assembly Details
NOTE: This model is designed to be a tight fit! When fitting the print onto a headset the first time, try to gently coax the edges of the headset into place. The seams should line up and the headset should slip into place. Subsequent donning/doffings should be easier.
This model was designed to enable easy donning and doffing of the Quest 3S while maintaining a rigid connection to the robot/vehicle. I also included a short wall behind the headset that includes zip tie holes to safely attach a USB-Ethernet adapter.
The model works best when thin (1/8" or 3/16") bungee cord (link) is used to hold the headset in place. A channel on the bottom of the mount keeps the bungee cord in place when the headset is removed. Three 10-32 bolts secure the mount to your robot.