Liczymy pasujące modele…
Use color change g-code to make it easily readable. The mounting holes should line up with REV robotics 8mm hole spacing.
Wydruk około 0,36 €–0,45 € nettoWstępna wycena jednego wariantu
Assembly & Rigging Tutorial Video: Features: Misumi SAR 200-300 Series full Compatibility: Designed for integration with Misumi's SAR slide series, including dual-stage (SAR 210-250) and three-stage (SAR 310-350) models. Durable…
Pin design to help teams make cool FIRST logos with color gradients without requiring a multicolor printer, these can be made with any printer and just about any slicer. Instructions for color change on Prusa machines is linked below, but…
Please leave a like if this was useful, this too a long time to make For use with REV Robotics servos and parts, attaches to Studica linear slides Gears attach to servos and ball bearings Top bevel gear can attach using ball bearing or…
The original Onshape file is linked, you will need to change the ‘TeamNumber’ configuration value to your team number. Use color change g-code to make it easily readable. The mounting holes should line up with REV robotics 8mm hole spacing.
Works with the REV Robotics 41-1147 High Strength Hex Hub Onshape File - Choose short, medium, long and 2,3,4,6 fingers
Assembly & Rigging Tutorial Video: This method works seamlessly with any of Misumi's Slides, including the dual-stage SAR 210-250 series and the three-stage SAR 310-350 series. This method also used GoBilda as a build platform, but will…
Intended for use with the Gulfcoast Robotics Premium White LED Light Bar, this printable dimmer switch bracket provides a simple, yet clean mounting solution. It's compatible with 4040 (40mm) wide dual slot V-extrusions. used on the on…
A Raspberry Pi mount I made for a robotics competition that is press-fit or screwed-on to attach the pi to the mount and zip-tied or bolted on to attach the mount to the robot. Has M5 holes for mounting. This mount is designed for the…
Disclaimer GoBilda batteries are illegal in FTC!!! (read game manual for more information)
Vytiskněte a poskládejte si stanici, která bude měřit rychlost venkovního větru, nebo vám řekne, jak silně jste schopni foukat. Zapojte 3D tiskárnu a pusťte se do tisku. Co všechno se s ním dá dělat? Zjistíte, jak moc máte silné plíce…
This 24-tooth spur gear is a precision-modeled, 3D printed mechanical component designed for robotics, engineering projects, and prototyping applications. With clean, accurate tooth geometry and a solid center for maximum strength, it’s…
This was Every Flavor Robotics' demonstration to enter William Osman's 2024 OpenSauce convention. This robot was made possible with a MotorGo board, with built-in: - power management - motor controls - wireless comms - ESP32…
A model of an empty AIO Robotics filament spool. Model not intended for printing, mostly for exploring the re-use possibilities with a filament spool of these dimensions. The side gaps and filament slots haven't been modeled yet, but the…
Vytiskněte a poskládejte si stanici, která bude měřit rychlost venkovního větru, nebo vám řekne, jak silné máte plíce. Tuto stanici pak můžete napojit na micro:bit nebo další řídící elektroniku.
Jednoduché robotické vozítko je skvěla robotická hračka, která může nahradit drahé robotické vybavení, na které vám nezbyly finanční prostředky. Pokud tedy máte micro:bit, tak hurá do tisku
FIRST Robotics Competition (FRC) Rapid React Logo
FIRST Robotics Competition (FRC) Destination: Deep Space Logo
Projekt harmoniky pro výuku informatiky a hudební výchovy pro micro:bit, s kterým splníte požadavky MŠMT na digitální kompetence.
Upgrade to our underwater drone from our final video (link) on the mine exploration mission.
I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…
Small motor controller holder, that features two mounting holes spaced 3in apart. Two cavities underneath the holder allow for zip-tie pass-through. Update 2026 - I've had a few people mention that they are slightly undersized. While They…
Frij 75477M Our team's number plate mount. Mounting solution that utilises the ridges on the side of the VEX V5RC number plate. Easy to insert and hard to remove, basically impossible to be hit out by another robot during a match. The…
This is just the same but works with the rev robotics extrusion.
Theory is when you know everything, but nothing works. Practice is when you don't know anything, yet everything works. In Robotics we combine theory and practice ; nothing works, and we don't know why. Print Settings: Layer height: 0.2…
Custom robotics platform i made as part of a final project in a CS course at the Holon Institute of Technology ("software development for human robot interaction"). The platform is compatible with Camera Module 3 and Pi 5 . case not…
Hello! I have made a rim for a robotics wheel, intended in the use of RC cars. Why, you may ask? Well, I found that the standard rim that these quality wheels come with are not only not stylish, but made of flimsy, thin plastic,…
The Fid Tool is a square flat tool intended to assist the operator in accurately marking the position to place a bar code, QR code sticker or similar on the robotics floor. These are known as fiducials at sites where robots use a grid of…
This is the highly detailed CAD model of Vaquita 4.0, GEARS Inc. Robotics ROV for the 2025-2025 MATE ROV competition. Some of the parts are 3d printable including the thruster mounts and corner brackets. I would highly recommend printing…
The pins on the Grayhill 30-3UL push-button switch was selected for use with the Blue Robotics switch thanks to its high current rating and low price - however the connection tabs are delicate, especially if frequently accessing adjacent…
Edit 1/30/2026: Finally checked this page after 2 years and saw the comments about the scaling issues. Went through and remodeled each part to match the dimensions I printed it at in 2024. The model is still not optimal, as I made this…
Vytiskněte a poskládejte si stanici, která bude měřit rychlost venkovního větru, nebo vám řekne, jak silně jste schopni foukat. Zapojte 3D tiskárnu a pusťte se do tisku. Co všechno se s ním dá dělat? Zjistíte, jak moc máte silné plíce…
Custom Quick Swap Plates for VEX. These use 10x3MM Neodymium magnets and are superglued into the plates. You will need to either have a Multicolor 3D printer, or use a M600 Macro to swap between colors. The plates are blank so they will…
This is your final test. make this thing a hat or a mustache. I do not care. I only ask that you don't make anything too offensive and have fun. Now go forth my new laborer- “engineers”
We have broken most of our Vex robotics crank handles, likely because of the torque the students frequently apply to them. This handle has a loose rotator that allows for high-speed cranking, and it's a slightly larger piece. It was…
Navrhli jsme karoserii pro model robotického vozítka od společnosti OMG Robotics. Naše karoserie se dá snadno připevnit k podvozku s deskou MB1 pomocí dvou šroubů M3. Horní díl podvozku jsme však mírně upravili – byly do něj vloženy…
REVISED - Extended cable clip to work with the Gulfcoast Robotics Z-axis Linear Rail Kit ; this is a little deeper, retaining the cable fully. This was modeled off the original file from Gulfcoast Robotics, and fits the Z-gantry…
Upgrade to our underwater drone from our final video (link) on the mine exploration mission.
I think uploading a “make” or making a comment can be considered community outreach for FTC . I'd love to see what you are all doing with these! Please click ‘Like’ (the heart) here on Printables.com if you like it! Here is a compact…
Doporučuji tisk z transparentního materiálu popřípadě oříznout pohledovou stranu odkaz na stavebnici Stavebnice hrací kostka od OMG Robotics https://omgrobotics.com/produkt/stavebnice-na-pajeni-hraci-kostka/
Paramètres d’impression Matériau: ABS Remplacement pour imprimante sans chambre fermée : PETG Matériau exact : Sparta 3D ABS+ Épaisseur de couches : 0,2 mm Diamètre de buse : 0,4 mm Nombre de périmètres : 3 Couches du dessus : 5 Couches…
This streamlined Gizmo Case not only saves space but also provides some QOL features my team was wanting. Features: The ports are sized and contoured to provide a more snug fit that will help keep the connectors from coming unplugged…
I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…
This thing is a flexture based quick mount that allows you to place and remove components with ease. I have never actually measured repeatability, but I have removed and replaced pick and place feeders with 0603 components and have not…
Lunar water condenser and purifier device created by Little Rock Central High's SECME team for BESTRobotics2024 3D print challenge
A modular design containing a food grade charcoal filter and a baffled chamber for increased condenser surface area.
Uses 78 6x2mm magnets. You could lower the number if necessary, but its not recommended. We made an insert version, if you don't have an AMS and want the border to not be white, there also a non insert version if you're just like that.…
This is an electronics tray and bulkheads for the BlueRobotics 6" ROV (149 cm inner diameter of cylinder). The Bulkheads are modified from the ones supplied by the BlueRobotics website for the 4" model. NOTE: I was unable to attribute…
The intent was to minimize wiring & eliminate the unreliable JST connectors used for the CAN Bus system used in FRC robots & at the same time allow SPARK MAX modules to be mounted in such a way to allow a clean neater CAN bus…
This is a bolt-on mount for REV Robotics Spark MAX motor controllers. This version accepts #8 bolts to mount to any flat surface or can use existing hole to tie wrap the base in any desired location. You can use the bolt holes underneath…
This is a scale model of the 2025 FRC game field for Reefscape. I designed it to be scaled down to 4% (Yes 4, not 5). I used pieces of standard 1.75mm filament to connect the parts. Be warned; I haven't finished printing the barges in the…
Made to pull 10A-40A REV fuses from a REV PDH: Easy-to-print, no supports required.
This is an over the top style mount for the VH-109 FRC radio. It was designed to not cover or interfere with any functionality of the radio. Lights are visible and ports are clear. Minimal amounts of the radio are covered to allow air…
Build your own Reef Scoring Pipes for the 2025 FIRST® Robotics Competition Reefscape game. The game requires scoring towers built with very specific angles and these couplers allow you to use standard 1.5 inch PVC pipe from the hardware…
This model has two versions a magnetic license plate and holder or a velcro license plate and holder for the Vex Robotics V5 competition robots. Custom numbering is needed to display your team numbers during competition. Materials Needed…
Quick little Removable Link block. Uses hexagon spacers to stand-off from the top panel, the fastening screws can also be used to hold a link cover on. Update 30/01/25 I have included a link cover, and there is now a drill template to use…
Though the Rev Driver Hub battery is similar to a typical old-school cell phone battery, it's shape prevents it from fitting in most universal chargers. And it only fits poorly in the one that does work. Thus, this model… This model holds…
Small motor controller holder, that features two mounting holes spaced 3in apart. Two cavities underneath the holder allow for zip-tie pass-through. Update 2026 - I've had a few people mention that they are slightly undersized. While They…
Frij 75477M Our team's number plate mount. Mounting solution that utilises the ridges on the side of the VEX V5RC number plate. Easy to insert and hard to remove, basically impossible to be hit out by another robot during a match. The…
Frij 75477M Our team's keychain handed out at the VEX Robotics High Stakes Australian Nationals competition. Print your own! Printing Tips Ironed version is recommended for a smooth top layer. 3MF files include config for multicoloured…
VEX Multi-Color Magnetic License Plate Never worry about swapping your license plate again! This is a VEX V5-Compatible and V5RC Legal magnetic license plate. The plate is meant to be printed in multicolor, with embedded text for your…
For use with 2 REV Robotics servos for FTC robotics Into the Deep Can be adapted for other FTC games INCLUDES FUSION FILE FOR MODIFICATION
Overview Low profile replacement end cap for REV Robotics Ultraplanetary motor. Designed by AX3D for FTC21196 Norwood Industries. Used on their robot. Benefits 0.8mm shorter Low profile sides JST-VH cable strain relief Print Instructions…
My Ender 3 S1 Pro was upgraded with Gulfcoast Robotics 3 point carriage and now needed a new handle. Since I'm using a Sonic Pad, I decided to include mount points for the resonance sensor and camera. I used heatset mounts for the sensor…
Use color change g-code to make it easily readable. The mounting holes should line up with REV robotics 8mm hole spacing.
Will fit 5 mm hex shaft and 9mm 2GT belt. Onshape file - Use configurations to change the number of teeth, then export as STL.
Insert 2x 1-1 pins in the two holes above the trigger (preferably the left side). The holes in the model may need to be widened a little bit to fit snuggly.
This is just the same but works with the rev robotics extrusion.
Designed to work with REV robotics components. Core Hex Motor 3x8mm hex bolts 3x16mm hex bolts 3mm Nylok nuts 15mm extrusion GT2 6mm belt (commonly used in 3d printing) 6mm idlers Zip ties You can use a simple extension spring inline with…
The SparkFun Robotics Claw MkII (part # ROB-11524) is a big improvement on their mark 1 model. The new Pan/Tilt MKII bracket (part # ROB-11674) is also nice (if a tad pricey). Unfortunately the instructions to mount a claw to the Pan/Tilt…
This model was made as our team, 22948, needed to capture some footage before our national competition for our instagram. This model is a simple but useful one. printed in PETG (can be done in PLA, but will not be as strong) 0.2 layer…
Williamston Vespidae Robotics Team 7818 Logo Coin Willie Logo used by permission of WHS Designed for multi-color - import as one object
I made this based off some screenshots from the game reveal, the dimensions of my model should be either really close to the actual thing, if not better. I printed mine with 3 walls and lightning infill out of PLA and it seems strong…
Dimensionally and weight-accurate model/print file of the 2025-2026 Vex Robotics game element, for the game Push Back.
File updated The holes are offset from the center. This allows it to be used as a swivel wheel without the attached motor. With the holes, hence wheel, in the middle, the bracket won't rotate when the vehicle changes direction (think…
The square and round wheel hub inserts for the VEX wheels don't stay in place, so these replace them. I put a few drops of super glue on them, insert them into the hole, and pound it in with a hammer. The hole for the shaft sometimes…
I made these to be able to attach the VEX V5 Charging Dock ( https://www.thingiverse.com/thing:4182218 ) by Evansphysics to a table. In the picture, these parts would attach to the two ends of the row of docks to secure it to a table. In…
Set of three VEX high strength gears. I've taken out all the overhangs so it prints flat on the bed. 84 Tooth, 60 tooth, and 36 tooth They include the holes, like the original gears, so they could be attached to other pieces. The hole for…
Simple symmetrical cam gear so the direction of travel is reversible.
Gold and Black styled fidget gear. Designed for a handout for the Penticton Robotics Team
Designed for MMU printing. The 3mf is pre colored and prepped for the Bambu A1 Mini on Bambu Slicer. Should be simple to convert to other printers so long as you use that slicer. Low wastage, only a couple grams given how thin you can…
Since Gulf Coast Robotics is no longer in business, I thought I would share the stl files and instructions for their X, Y, and Z linear rails for the Ender 3 S1 Pro. The linear rail guides, drill template, and the ribbon cable holder are…
Theory is when you know everything, but nothing works. Practice is when you don't know anything, yet everything works. In Robotics we combine theory and practice ; nothing works, and we don't know why. Print Settings: Layer height: 0.2…
Custom robotics platform i made as part of a final project in a CS course at the Holon Institute of Technology ("software development for human robot interaction"). The platform is compatible with Camera Module 3 and Pi 5 . case not…
Bracket for mounting a pneumatics manifold commonly seen in FIRST Robotics Competition. Sized to fit 3x 1/8" NPT t-fittings. Includes two mounting holes for #10 socket head cap screws. Two slots for zip-ties positioned between t-fittings.
I wanted to challenge myself a bit and do some reference-based modeling in fusion360. I decided to work on Johnny 5 from Short Circuit. This was a fun and challenging project with many roadblocks that forced me to think outside the box.…
The holes in my carriage didn't match the schematic so I made a simple handle to fit my needs. https://a.co/d/2ZAlVh9 https://a.aliexpress.com/_mPIRC5h BOM 2x M4x8
I reworked my earlier crank handle when I found that the students were still breaking the barrel off the stem (the Teenager Test). This one is best printed with three vertical shells, with the parts in the orientation I have shown in the…
Place screw heads in the channel at the top and let them roll down to sort into the baskets. The whole screw sorter is split into a top and bottom piece that go together. The top screw sorter sorts short screws from .375" to .875". The…
A gripper finger I designed for bin-picking PVC tees. Should work on all grippers of the Jodell EPG-series.
Od OMG Robotics jsme si koupili jejich jezdítko Simple Car včetně joysticku na rozšiřující desce MB2. Rozšiřující deska má akumulátor přilepený oboustrannou páskou k desce, což se mi pro používání s dětmi moc nelíbílo. Tak jsem vytvořil…
Meet Baby Perun , a miniature model of CTU Robotics’ Perun rover ! 🛰 Our student team designs and builds rovers to compete in international competitions and to gain valuable knowledge in robotics and space exploration . Baby Perun is a…
Please shoot a quick photo and upload as a ‘Make’. I'd love to see what you all are doing with these! goPlate™ is an electronics mounting platform filling the same role as goBilda's aluminum grid plates, except in more sizes, printable…
Used to mount a RealSense depth camera to the front of the quadruped robot for perception tasks.
The model can be printed in two parts: Part A: contains the main body (grey) with supports Part B: contains the central “eye” (blue) The different pieces of Part A need to be separated by carefully twisting them after printing to remove…
heres a thingie i didnt know I needed before printing the base files!
This preliminary collection of modular XRP-compatible robotics frame components allow creators to assemble an unlimited variety of devices, from chassis to arms to you-name-it. This is just the beginning – what is provided here is a…
