Search results: robotics

Counting matching models…

Printables

T200 & T500 BlueRobotics motor propeller guards

Upgrade to our underwater drone from our final video (link) on the mine exploration mission.

Printables

Bed lock leveling wheel clickers - ender3 series - e3max - Gulfcoast Robotics e3 plate

I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…

Order a print of this model

Printables

REV Robotics Spark Max Holder

Small motor controller holder, that features two mounting holes spaced 3in apart. Two cavities underneath the holder allow for zip-tie pass-through. Update 2026 - I've had a few people mention that they are slightly undersized. While They…

Order a print of this model

Printables

VEX Robotics V5 Plate Holder

Frij 75477M Our team's number plate mount. Mounting solution that utilises the ridges on the side of the VEX V5RC number plate. Easy to insert and hard to remove, basically impossible to be hit out by another robot during a match. The…

Order a print of this model

Printables

FTC into the deep specimen claw REV robotics adapter.

This is just the same but works with the rev robotics extrusion.

Order a print of this model

Printables

Robotics Sign

Theory is when you know everything, but nothing works. Practice is when you don't know anything, yet everything works. In Robotics we combine theory and practice ; nothing works, and we don't know why. Print Settings: Layer height: 0.2…

Order a print of this model

Printables

Robotics Platform for Raspberry Pi 5 with 28 BYJ-48 Motors & L298N DC Motor Controllers & Pi Camera Module 3

Custom robotics platform i made as part of a final project in a CS course at the Holon Institute of Technology ("software development for human robot interaction"). The platform is compatible with Camera Module 3 and Pi 5 . case not…

Order a print of this model

Printables

Rim for a Robotics tire!

Hello! I have made a rim for a robotics wheel, intended in the use of RC cars. Why, you may ask? Well, I found that the standard rim that these quality wheels come with are not only not stylish, but made of flimsy, thin plastic,…

Order a print of this model

Printables

Fid Tool. Robotics Fiducial Alignment Tool

The Fid Tool is a square flat tool intended to assist the operator in accurately marking the position to place a bar code, QR code sticker or similar on the robotics floor. These are known as fiducials at sites where robots use a grid of…

Order a print of this model

Printables

GEARS Inc. Robotics Vaquita 4.0 3d model

This is the highly detailed CAD model of Vaquita 4.0, GEARS Inc. Robotics ROV for the 2025-2025 MATE ROV competition. Some of the parts are 3d printable including the thruster mounts and corner brackets. I would highly recommend printing…

Order a print of this model

Printables

Blue Robotics switch strain relief clip-on guard

The pins on the Grayhill 30-3UL push-button switch was selected for use with the Blue Robotics switch thanks to its high current rating and low price - however the connection tabs are delicate, especially if frequently accessing adjacent…

Order a print of this model

Printables

Dozer (FIRST Robotics)

Edit 1/30/2026: Finally checked this page after 2 years and saw the comments about the scaling issues. Went through and remodeled each part to match the dimensions I printed it at in 2024. The model is still not optimal, as I made this…

Order a print of this model

Printables

Anemometr pro micro:bit OMG Robotics

Vytiskněte a poskládejte si stanici, která bude měřit rychlost venkovního větru, nebo vám řekne, jak silně jste schopni foukat. Zapojte 3D tiskárnu a pusťte se do tisku. Co všechno se s ním dá dělat? Zjistíte, jak moc máte silné plíce…

Order a print of this model

Printables

Vex MagPlates VRC | Custom Quick Swap Plate Solution for Vex Robotics

Custom Quick Swap Plates for VEX. These use 10x3MM Neodymium magnets and are superglued into the plates. You will need to either have a Multicolor 3D printer, or use a M600 Macro to swap between colors. The plates are blank so they will…

Order a print of this model

Printables

CTEC-Robotics-TESTCAD

This is your final test. make this thing a hat or a mustache. I do not care. I only ask that you don't make anything too offensive and have fun. Now go forth my new laborer- “engineers”

Order a print of this model

Printables

Crank handle for Vex robotics and automata. NOTE: updated hardier version https://www.printables.com/model/1363457-sturdy-high-torque-crank-handle-for-pltw-automata

We have broken most of our Vex robotics crank handles, likely because of the torque the students frequently apply to them. This handle has a loose rotator that allows for high-speed cranking, and it's a slightly larger piece. It was…

Order a print of this model

Printables

Karoserie tanku pro OMG robotics

Navrhli jsme karoserii pro model robotického vozítka od společnosti OMG Robotics. Naše karoserie se dá snadno připevnit k podvozku s deskou MB1 pomocí dvou šroubů M3. Horní díl podvozku jsme však mírně upravili – byly do něj vloženy…

Order a print of this model

Printables

Revised Cable Clip for Ender 3 S1 / S1 Pro Z-axis - Gulfcoast Robotics Linear Rail Kit

REVISED - Extended cable clip to work with the Gulfcoast Robotics Z-axis Linear Rail Kit ; this is a little deeper, retaining the cable fully. This was modeled off the original file from Gulfcoast Robotics, and fits the Z-gantry…

Order a print of this model

Printables

T200 & T500 BlueRobotics motor propeller guards

Upgrade to our underwater drone from our final video (link) on the mine exploration mission.

Order a print of this model

Printables

Whijeva' Battery Holder for Rev, goBilda, Modern Robotics 12v FTC Batteries

I think uploading a “make” or making a comment can be considered community outreach for FTC . I'd love to see what you are all doing with these! Please click ‘Like’ (the heart) here on Printables.com if you like it! Here is a compact…

Order a print of this model

Printables

Hrací kostka od OMG Robotics

Doporučuji tisk z transparentního materiálu popřípadě oříznout pohledovou stranu odkaz na stavebnici Stavebnice hrací kostka od OMG Robotics https://omgrobotics.com/produkt/stavebnice-na-pajeni-hraci-kostka/

Order a print of this model

Printables

Hanka Robotics

Mal wieder eine Logo das mich gereizt hat in 3D zu erstellen.

Order a print of this model

Printables

Robotique CRC Robotics TakTik 2025 Game Piece de Jeu

Paramètres d’impression Matériau: ABS Remplacement pour imprimante sans chambre fermée : PETG Matériau exact : Sparta 3D ABS+ Épaisseur de couches : 0,2 mm Diamètre de buse : 0,4 mm Nombre de périmètres : 3 Couches du dessus : 5 Couches…

Order a print of this model

Printables

BEST Robotics Low Profile Gizmo Case

This streamlined Gizmo Case not only saves space but also provides some QOL features my team was wanting. Features: The ports are sized and contoured to provide a more snug fit that will help keep the connectors from coming unplugged…

Order a print of this model

Printables

Misumi Linear Slide Insert for SAR: (String Drive) FTC Robotics

Assembly & Rigging Tutorial Video: Features: Misumi SAR 200-300 Series full Compatibility: Designed for integration with Misumi's SAR slide series, including dual-stage (SAR 210-250) and three-stage (SAR 310-350) models. Durable…

Order a print of this model

Printables

Bed lock leveling wheel clickers - ender3 series - e3max - Gulfcoast Robotics e3 plate

Order a print of this model

Printables

Flexture Based Repeatable Quick-Mount for Robotics and More

This thing is a flexture based quick mount that allows you to place and remove components with ease. I have never actually measured repeatability, but I have removed and replaced pick and place feeders with 0603 components and have not…

Order a print of this model

Printables

Little Rock Central High School 2024 BEST Robotics 3D Print Challenge

Lunar water condenser and purifier device created by Little Rock Central High's SECME team for BESTRobotics2024 3D print challenge

Order a print of this model

Printables

BESTRobotics2024 3dp Denison High School submission 2

A modular design containing a food grade charcoal filter and a baffled chamber for increased condenser surface area.

Order a print of this model

Printables

VEX Robotics Magnetic Plates

Uses 78 6x2mm magnets. You could lower the number if necessary, but its not recommended. We made an insert version, if you don't have an AMS and want the border to not be white, there also a non insert version if you're just like that.…

Order a print of this model

Printables

Blue Robotics ROV Electronic tray and Bulkheads 6" SIX Inches

This is an electronics tray and bulkheads for the BlueRobotics 6" ROV (149 cm inner diameter of cylinder). The Bulkheads are modified from the ones supplied by the BlueRobotics website for the 4" model. NOTE: I was unable to attribute…

Order a print of this model

Printables

FRC Swerve Cover for REV Robotics NEO & Voretx BLDC motors with Wago 221 connectors

The intent was to minimize wiring & eliminate the unreliable JST connectors used for the CAN Bus system used in FRC robots & at the same time allow SPARK MAX modules to be mounted in such a way to allow a clean neater CAN bus…

Order a print of this model

Printables

FRC REV Robotics Spark MAX Controller Mount

This is a bolt-on mount for REV Robotics Spark MAX motor controllers. This version accepts #8 bolts to mount to any flat surface or can use existing hole to tie wrap the base in any desired location. You can use the bolt holes underneath…

Order a print of this model

Printables

FRC 2025 Printable Field - FRobotics 4150

This is a scale model of the 2025 FRC game field for Reefscape. I designed it to be scaled down to 4% (Yes 4, not 5). I used pieces of standard 1.75mm filament to connect the parts. Be warned; I haven't finished printing the barges in the…

Order a print of this model

Printables

REV Robotics Fuse Puller

Made to pull 10A-40A REV fuses from a REV PDH: Easy-to-print, no supports required.

Order a print of this model

Printables

VH-109 Radio Mount for FIRST Robotics Competition (FRC)

This is an over the top style mount for the VH-109 FRC radio. It was designed to not cover or interfere with any functionality of the radio. Lights are visible and ports are clear. Minimal amounts of the radio are covered to allow air…

Order a print of this model

Printables

FIRST Robotics 2025 Reefscape Scoring Pipe Couplings for PVC Pipe Practice Towers

Build your own Reef Scoring Pipes for the 2025 FIRST® Robotics Competition Reefscape game. The game requires scoring towers built with very specific angles and these couplers allow you to use standard 1.5 inch PVC pipe from the hardware…

Order a print of this model

Printables

Vex Robotics V5 Competition Custom License Plate

This model has two versions a magnetic license plate and holder or a velcro license plate and holder for the Vex Robotics V5 competition robots. Custom numbering is needed to display your team numbers during competition. Materials Needed…

Order a print of this model

Printables

XT60 Power Link For Robotics or RC Projects

Quick little Removable Link block. Uses hexagon spacers to stand-off from the top panel, the fastening screws can also be used to hold a link cover on. Update 30/01/25 I have included a link cover, and there is now a drill template to use…

Order a print of this model

Printables

Rev Driver Hub Battery Charger Adapter for Vidpro PT-UNV Universal / Premium Tech Charger (Robotics / DriverHub)

Though the Rev Driver Hub battery is similar to a typical old-school cell phone battery, it's shape prevents it from fitting in most universal chargers. And it only fits poorly in the one that does work. Thus, this model… This model holds…

Order a print of this model

Printables

REV Robotics Spark Max Holder

Order a print of this model

Printables

VEX Robotics V5 Plate Holder

Order a print of this model

Printables

VEX Robotics 75477M Keychain

Frij 75477M Our team's keychain handed out at the VEX Robotics High Stakes Australian Nationals competition. Print your own! Printing Tips Ironed version is recommended for a smooth top layer. 3MF files include config for multicoloured…

Order a print of this model

Printables

VEX Robotics Multi-Color Magnetic License Plate

VEX Multi-Color Magnetic License Plate Never worry about swapping your license plate again! This is a VEX V5-Compatible and V5RC Legal magnetic license plate. The plate is meant to be printed in multicolor, with embedded text for your…

Order a print of this model

Printables

FTC Rev Robotics Differential Claw

Please leave a like if this was useful, this too a long time to make For use with REV Robotics servos and parts, attaches to Studica linear slides Gears attach to servos and ball bearings Top bevel gear can attach using ball bearing or…

Order a print of this model

Printables

FTC Robotics Rack and Pinion Claw

For use with 2 REV Robotics servos for FTC robotics Into the Deep Can be adapted for other FTC games INCLUDES FUSION FILE FOR MODIFICATION

Order a print of this model

Printables

FTC Rev Robotics Channel Corner Reinforcement Bracket

Reinforces corners of REV channels

Order a print of this model

Printables

REV Robotics UltraPlanetary Low Profile End Cap

Overview Low profile replacement end cap for REV Robotics Ultraplanetary motor. Designed by AX3D for FTC21196 Norwood Industries. Used on their robot. Benefits 0.8mm shorter Low profile sides JST-VH cable strain relief Print Instructions…

Order a print of this model

Printables

Ender 3 S1 Pro - Gulf Coast Robotics 3 Point Y Carriage Handle with accessory mounting options

My Ender 3 S1 Pro was upgraded with Gulfcoast Robotics 3 point carriage and now needed a new handle. Since I'm using a Sonic Pad, I decided to include mount points for the resonance sensor and camera. I used heatset mounts for the sensor…

Order a print of this model

Printables

FTC Robotics - Servo Warning Label

Use color change g-code to make it easily readable. The mounting holes should line up with REV robotics 8mm hole spacing.

Order a print of this model

Printables

FTC Robotics - Power Button Label

Use color change g-code to make it easily readable. The mounting holes should line up with REV robotics 8mm hole spacing.

Order a print of this model

Printables

FTC Robotics - Team Numbers

The original Onshape file is linked, you will need to change the ‘TeamNumber’ configuration value to your team number. Use color change g-code to make it easily readable. The mounting holes should line up with REV robotics 8mm hole spacing.

Order a print of this model

Printables

FTC Robotics - REV Pulley Generator

Will fit 5 mm hex shaft and 9mm 2GT belt. Onshape file - Use configurations to change the number of teeth, then export as STL.

Order a print of this model

Printables

FTC Robotics - Flexy Intake (Customizable)

Works with the REV Robotics 41-1147 High Strength Hex Hub Onshape File - Choose short, medium, long and 2,3,4,6 fingers

Order a print of this model

Printables

Vex Robotics Gatling Gun Trigger Safety

Insert 2x 1-1 pins in the two holes above the trigger (preferably the left side). The holes in the model may need to be widened a little bit to fit snuggly.

Order a print of this model

Printables

FTC into the deep specimen claw REV robotics adapter.

This is just the same but works with the rev robotics extrusion.

Order a print of this model

Printables

FTC Robotics - Belt Lift

Designed to work with REV robotics components. Core Hex Motor 3x8mm hex bolts 3x16mm hex bolts 3mm Nylok nuts 15mm extrusion GT2 6mm belt (commonly used in 3d printing) 6mm idlers Zip ties You can use a simple extension spring inline with…

Order a print of this model

Printables

Misumi Linear Slide Insert for SAR: (Belt Drive) FTC Robotics

Assembly & Rigging Tutorial Video: This method works seamlessly with any of Misumi's Slides, including the dual-stage SAR 210-250 series and the three-stage SAR 310-350 series. This method also used GoBilda as a build platform, but will…

Order a print of this model

Printables

Claw Mounting Bracket for SparkFun Robotics Claw MkII

The SparkFun Robotics Claw MkII (part # ROB-11524) is a big improvement on their mark 1 model. The new Pan/Tilt MKII bracket (part # ROB-11674) is also nice (if a tad pricey). Unfortunately the instructions to mount a claw to the Pan/Tilt…

Order a print of this model

Printables

Gorpo or DJI mount for Rev Robotics extrusion

This model was made as our team, 22948, needed to capture some footage before our national competition for our instagram. This model is a simple but useful one. printed in PETG (can be done in PLA, but will not be as strong) 0.2 layer…

Order a print of this model

Printables

Williamston Vespidae Robotics Team 7818 Logo Coin

Williamston Vespidae Robotics Team 7818 Logo Coin Willie Logo used by permission of WHS Designed for multi-color - import as one object

Order a print of this model

Printables

VEX ROBOTICS Push Back Octoball Mockup

I made this based off some screenshots from the game reveal, the dimensions of my model should be either really close to the actual thing, if not better. I printed mine with 3 walls and lightning infill out of PLA and it seems strong…

Order a print of this model

Printables

Vex Robotics 2025-2026 PUSH BACK BLOCK/OCTOBALL

Dimensionally and weight-accurate model/print file of the 2025-2026 Vex Robotics game element, for the game Push Back.

Order a print of this model

Printables

VEX Robotics Swerve Wheel Bracket

File updated The holes are offset from the center. This allows it to be used as a swivel wheel without the attached motor. With the holes, hence wheel, in the middle, the bracket won't rotate when the vehicle changes direction (think…

Order a print of this model

Printables

VEX Robotics 3" and 4" Wheel Hub Inserts

The square and round wheel hub inserts for the VEX wheels don't stay in place, so these replace them. I put a few drops of super glue on them, insert them into the hole, and pound it in with a hammer. The hole for the shaft sometimes…

Order a print of this model

Printables

VEX Robotics V5 Battery Dock End Plates

I made these to be able to attach the VEX V5 Charging Dock ( https://www.thingiverse.com/thing:4182218 ) by Evansphysics to a table. In the picture, these parts would attach to the two ends of the row of docks to secure it to a table. In…

Order a print of this model

Printables

VEX Robotics High Strength Gears (Simple Print)

Set of three VEX high strength gears. I've taken out all the overhangs so it prints flat on the bed. 84 Tooth, 60 tooth, and 36 tooth They include the holes, like the original gears, so they could be attached to other pieces. The hole for…

Order a print of this model

Printables

VEX Robotics Symetrical Cam Gear (Reversible)

Simple symmetrical cam gear so the direction of travel is reversible.

Order a print of this model

Printables

Penticton Robotics Style - Fidget Clicking Wheel 2.0

Gold and Black styled fidget gear. Designed for a handout for the Penticton Robotics Team

Order a print of this model

Printables

Area 53 Robotics Alien Keychain

Designed for MMU printing. The 3mf is pre colored and prepped for the Bambu A1 Mini on Bambu Slicer. Should be simple to convert to other printers so long as you use that slicer. Low wastage, only a couple grams given how thin you can…

Order a print of this model

Printables

Gulf Coast Robotics - Linear Rail Parts & Instructions - Ender 3 S1 Pro

Since Gulf Coast Robotics is no longer in business, I thought I would share the stl files and instructions for their X, Y, and Z linear rails for the Ender 3 S1 Pro. The linear rail guides, drill template, and the ribbon cable holder are…

Order a print of this model

Printables

Robotics Sign

Order a print of this model

Printables

Robotics Platform for Raspberry Pi 5 with 28 BYJ-48 Motors & L298N DC Motor Controllers & Pi Camera Module 3

Order a print of this model

Printables

FIRST Robotics Pneumatics Bracket

Bracket for mounting a pneumatics manifold commonly seen in FIRST Robotics Competition. Sized to fit 3x 1/8" NPT t-fittings. Includes two mounting holes for #10 socket head cap screws. Two slots for zip-ties positioned between t-fittings.

Order a print of this model

Printables

Empty Filament Spool - AIO Robotics

A model of an empty AIO Robotics filament spool. Model not intended for printing, mostly for exploring the re-use possibilities with a filament spool of these dimensions. The side gaps and filament slots haven't been modeled yet, but the…

Order a print of this model

Printables

Johnny 5 Kit Card | Short Circuit | NOVA Robotics S.A.I.N.T

I wanted to challenge myself a bit and do some reference-based modeling in fusion360. I decided to work on Johnny 5 from Short Circuit. This was a fun and challenging project with many roadblocks that forced me to think outside the box.…

Order a print of this model

Printables

Ultra Low Profile Bed Handle for Gulfcoast Robotics / Befenybay Y-Axis Carriage

The holes in my carriage didn't match the schematic so I made a simple handle to fit my needs. https://a.co/d/2ZAlVh9 https://a.aliexpress.com/_mPIRC5h BOM 2x M4x8

Order a print of this model

Printables

Sturdy high-torque crank handle for PLTW automata and Vex robotics

I reworked my earlier crank handle when I found that the students were still breaking the barrel off the stem (the Teenager Test). This one is best printed with three vertical shells, with the parts in the orientation I have shown in the…

Order a print of this model

Printables

Vex Robotics Screw Sorter

Place screw heads in the channel at the top and let them roll down to sort into the baskets. The whole screw sorter is split into a top and bottom piece that go together. The top screw sorter sorts short screws from .375" to .875". The…

Order a print of this model

Printables

Gripper Finger for Jodell Robotics EPG-series

A gripper finger I designed for bin-picking PVC tees. Should work on all grippers of the Jodell EPG-series.

Order a print of this model

Printables

Ochranný kryt na desku OMG Robotics MB2 pro MicroBit

Od OMG Robotics jsme si koupili jejich jezdítko Simple Car včetně joysticku na rozšiřující desce MB2. Rozšiřující deska má akumulátor přilepený oboustrannou páskou k desce, což se mi pro používání s dětmi moc nelíbílo. Tak jsem vytvořil…

Order a print of this model

Printables

Baby Rover Perun - CTU Robotics

Meet Baby Perun , a miniature model of CTU Robotics’ Perun rover ! 🛰 Our student team designs and builds rovers to compete in international competitions and to gain valuable knowledge in robotics and space exploration . Baby Perun is a…

Order a print of this model

Printables

goPlate 2.0.1: 8mm x M4 Grid Plate Mount System for Electronics / Robotics - goBilda and Rev Compatible

Please shoot a quick photo and upload as a ‘Make’. I'd love to see what you all are doing with these! goPlate™ is an electronics mounting platform filling the same role as goBilda's aluminum grid plates, except in more sizes, printable…

Order a print of this model

Printables

Realsense Depth Camera Mount for xTerra Robotics SVAN M2

Used to mount a RealSense depth camera to the front of the quadruped robot for perception tasks.

Order a print of this model

Printables

first robotics cage earrings

cages from the 2024-2025 first robotics reefcape earrings

Order a print of this model

Printables

GRAIL: Generative Robotics & AI for EU Industrial Leadership - Fidget Gyroscope

The model can be printed in two parts: Part A: contains the main body (grey) with supports Part B: contains the central “eye” (blue) The different pieces of Part A need to be separated by carefully twisting them after printing to remove…

Order a print of this model

Printables

24-Tooth Gear – Precision 3D Printed Mechanical Part for Robotics, Engineering, Prototyping and DIY Projects

This 24-tooth spur gear is a precision-modeled, 3D printed mechanical component designed for robotics, engineering projects, and prototyping applications. With clean, accurate tooth geometry and a solid center for maximum strength, it’s…

Order a print of this model

Printables

Rack Robotics WT-01 Tool Mount for Ender 3

heres a thingie i didnt know I needed before printing the base files!

Order a print of this model

Printables

"XBS" XRP Experiential Robotics Build System, Alpha Release

This preliminary collection of modular XRP-compatible robotics frame components allow creators to assemble an unlimited variety of devices, from chassis to arms to you-name-it. This is just the beginning – what is provided here is a…

Order a print of this model

Printables

SwftyRobotics Bumper Mounting Block Holder For Plywood Bumper

A holder that makes the Swfty Bumper Mounting Block work for normal plywood bumpers. Needs 1/4-20 screws and nuts.

Order a print of this model

Printables

BEST Claw #BESTRobotics2025

Prusa Research 3D Printing National Challenge Entry #BESTRobotics2025 School: Arrowhead Park Early College High School Team: Arrowhead Park Early College Team #: 0553 Hub: New Mexico BEST (NM), out of New Mexico State University Model…

Order a print of this model

Printables

FIRST Robotics Competition Destination: Deep Space Logo

FIRST Robotics Competition (FRC) Destination: Deep Space Logo

Order a print of this model

Printables

FIRST Robotics Competition Rapid React Logo

FIRST Robotics Competition (FRC) Rapid React Logo

Order a print of this model

Printables

VEX Robotics 45 degree Easy Printable Bevel Gears

The Bevel gears that come with the VEX kits are hard to print because of the shape and the recessed parts and overhangs. These lay flat on the print bed for easy printing. Also, the kit bevel gears don't allow the 16 tooth gears to mesh…

Order a print of this model

Printables

Bellevue Homeschool Enrichment Robotics Team Claw (Team Custom Part)

this is the claw to turn the selector node in the BEST robotics 2025 competition this part benefits the robot by allowing the robot to change the network configuration this part was designed by Joseph Lantz in Solid Works the print…

Order a print of this model

Printables

Undefined Robotics Gyro Fidget Spinner Toy

A Gyro Fidget Spinner Toy with Undefined Robotics branding.

Order a print of this model

Printables

Undefined Robotics InfiNemo Mini Model

A small mini model of Undefined Robotics' 2024/2025 Into the Deep robot.

Order a print of this model

Printables

FIRST Robotics Logo Pins

Pin design to help teams make cool FIRST logos with color gradients without requiring a multicolor printer, these can be made with any printer and just about any slicer. Instructions for color change on Prusa machines is linked below, but…

Order a print of this model

Printables

Vex robotics air regulator pressure gauge cap

In our lab we use a multitude of robotics parts. They sometimes have accidents at the hands of students, but often can still be salvaged. This air regulator pressure gauge is part of a pneumatics kit sold by Vex Robotics; it had an…

Order a print of this model

Printables

BEST Robotics Radio Antenna Mount #BESTRobotics2025

School: Rock Canyon High School Team: RCHS BEST Robotics (Accumetrics) Team #: 1919 Hub: Front Range BEST Function: This part aims to create a secure mount for the radio antenna (V5 Robot Radio piece) that allows the controller to…

Order a print of this model