HANKA Robotics - T08A2 Assault Tank (Ghost in the Shell 1995)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my take on the HANKA Robotics Spider Tank from Ghost In The Shell.
- Rating
- 0 / 5
- Likes
- 162
- Downloads
- 695
- Makes
- 0
- Views
- 4,717
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
This is my take on the HANKA Robotics Spider Tank from Ghost In The Shell. I included 2 heads - 1) the original 1995 anime version with horizontal slit eyes and 2) the 2017 version which has 3 dot eyes (not screen accurate - 2017 version has a different back body).
For the joints, I was recommended to use heat shrink tubing around the clips. Insert the ball and then shrink the tubing around the clips. This way, the joints will stay firm for a long time.
The body was meant to be joined by rare earth magnets and a metal strip so you could pose it. However, CA glue should do.
Most if not all FDM machines will not be able to print the barrels of the minigun well. I plan on DLP printing these parts. There will be an updated with improved leg toes and minigun just for FDM.
Known Fixes:
1 - Heads need gun position holes - Added 7.17.18
2 - Toes on legs need to be adjusted so it sits properly - Added 7.17.18
3 - Minigun redesign for FDM printing - Added 7.21.18
4 - Remeshed body and head - Added 7.21.18
Print instructions
Unassociated tags: Hanka Robotics
Category: Model Robots Print Settings
Printer Brand: Ultimaker
Printer: Ultimaker 2
Rafts: No
Supports: Yes
Resolution: .1
Infill: 10