1 / 25
HANKA Robotics - T08A2 Assault Tank (Ghost in the Shell 1995) — zdjęcie 1
1 / 25

HANKA Robotics - T08A2 Assault Tank (Ghost in the Shell 1995)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my take on the HANKA Robotics Spider Tank from Ghost In The Shell.

Ocena
0 / 5
Polubienia
162
Pobrania
695
Wydruki
0
Wyświetlenia
4717
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

This is my take on the HANKA Robotics Spider Tank from Ghost In The Shell. I included 2 heads - 1) the original 1995 anime version with horizontal slit eyes and 2) the 2017 version which has 3 dot eyes (not screen accurate - 2017 version has a different back body).

For the joints, I was recommended to use heat shrink tubing around the clips. Insert the ball and then shrink the tubing around the clips. This way, the joints will stay firm for a long time.

The body was meant to be joined by rare earth magnets and a metal strip so you could pose it. However, CA glue should do.

Most if not all FDM machines will not be able to print the barrels of the minigun well. I plan on DLP printing these parts. There will be an updated with improved leg toes and minigun just for FDM.

Known Fixes:
1 - Heads need gun position holes - Added 7.17.18
2 - Toes on legs need to be adjusted so it sits properly - Added 7.17.18
3 - Minigun redesign for FDM printing - Added 7.21.18
4 - Remeshed body and head - Added 7.21.18

Print instructions

Unassociated tags: Hanka Robotics

Category: Model Robots Print Settings

Printer Brand: Ultimaker

Printer: Ultimaker 2

Rafts: No

Supports: Yes

Resolution: .1

Infill: 10

Tagi