FIRST Robotics Logo Pins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small 1.75in FIRST logo, print the angled file to create cool gradients and color effects for promoting inclusivity
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 219
- Makes
- 0
- Views
- 1,180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Pin design to help teams make cool FIRST logos with color gradients without requiring a multicolor printer, these can be made with any printer and just about any slicer. Instructions for color change on Prusa machines is linked below, but it can also be done in Cura as well by changing color at layer height.
Color Changing (Prusa): https://help.prusa3d.com/en/article/color-change_1687
Color Changing (Cura): https://www.instructables.com/How-to-Change-Filament-Mid-print-Using-Cura-48/
I glued these tie tack pins to the back with some 5min epoxy: https://www.amazon.com/dp/B072B9XGZ4?psc=1&ref=ppx_yo2_dt_b_product_details
*NEW (3/16/2022) Files updated to fix some graphical issues and add versions with keyed holes for pin tack adhesion