Counting matching models…
Simple sleeve cover for Logitech BRIO webcam. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.1mm Infill: Standard Notes: I rotated flat side down to print avoiding rafts or supports. Might print…
Simple replacement for the keyboard foot, fits K270 K260 K275 K200 models
After having the scroll wheel break on my Logitech Anywhere MX mouse while it was in it's soft case in my backpack, I set out to make this hard case so I can throw it in my bag and not worry! My first step was to use my school's 3d…
Ein Chamer Kampl ist ein Lebkuchen in der Form des Chamer Stadtwappens. Diese wurden am Neujahrstag verschenkt. Der Sage nach wurden die Chamer Kampl im Mittelalter auch nach Nürnberg geschickt, da zwischen den beiden Städten…
Print to scale, suggested about 5cm side.
This year I started teaching technical drawing. My school didnt have ani learning utensils to help. So I created some.
This camera rail-mount / holder allows you to change the height and Z-axis rotation of your camera. Using the joint on the camera you can also change its pitch. The rail can be mounted vertically on the leg/side of the enclosure. You can…
Mount your Startech USB Hub securely! Mounts Startech ST4202USB USB 2.0 Hub, giving you open access to cabling on both sides (DC power barrel, USB-B & the four USB ports on the hub). Can screw right into a rack like…
Hi everyone! 😊 Due to popular demand, I decided to design my own enclosure for the Bigtreetech TFT 35 V3.0 display. This box supports the standard display emulation included with the printer and can switch to touch screen mode. I’ll be…
inspired by mech from the game called "G-NOME" the figure is 40mm height one model is with base, second model is baseless If you liked G-NOME or Mechs, follow me because more HAWCs are coming 0.08mm layer height
Our elf on the shelf will be baking cookies this year, but of course the cookie cutters have to be the right size ;). To make sure that this can be printed cleanly, I didn't want to simply scale large cookie cutters, but designed…
Hello. This is my remix for a Logitech mouse m650 stand/holder.
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
A holder for this USB-Hub available on amazon or aliexpress .
Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!), has been…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Simple and light K400 holder for my sim rig. It could fit other keyboards, i have no idea - feel free to try and let me know. It's not designed to use the keyboard on it, only to rest it while not in use. It appears to hold fine if doing…
This model lets you easily incorporate a rotary encoder into your Lego Tecnics mechanical designs. The gear is a press fit onto the encoder shaft and the shaft is centered on a Technics pin location for easy meshing. Designed to fit…
This is a simple pointer that fits nicely onto a technics axle. I use it with a gear reduction and limit switch to test automation projects.
I designed these in onshape cad with parametric variables in mind these are 30mm wide by 45mm long for 6x3mm magnets but I also designed the untested 90mm length. I decided I like the look of 45mm segments better and the weight of cable…
Replacement feet for the logitech G915 keyboard (both with and without numpad). Background : I printed out riser attachments for the feet so that the keyboard is at around a 20-30 degree incline. This however over time hurt my wrist so i…
-Parts List: M3 Screw (atleast 16mm long) M3 Nut (can also be replaced with a threaded insert) Plastic Glue -Assembly: Put some grease on the shaft then put one half of the knob on the shaft so it slots in and can rotate freely then glue…
El modelo necesita 4 tornillos de M3.5 y corona de 7mm. Está hecho para que no tengas que usar soportes. Sus dimensiones son 120x80x69mm.
I double-sided taped it to the top panel and used the wire organizer to run USB cord. Mount Uses one M3x30mm bolt with M3 Nut
Since my ears are in a pretty standard position I don't need the earcup hinge to be able to fold 360 degrees. I like my earcup to be pointed inwards because that's where my ears are. This snap on addition limits the range of the earcup…
The Technast Magical Text is designed to captivate and illuminate any space. This model features intricate details and is optimized for glow-in-the-dark printing. It's perfect for creating eye-catching signage or decorative elements that…
Hello everyone, I have vectorised a technical drawing of one of the first 3D printing patents and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes! Please note the…
You need to calibrate the tolerances to print good and i recomend to put organic supports.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
If you are a HiTechPet door owner, and you live in a part of the country where there are seasons, you have probably experienced the occasion where the door opens and get stuck at the top of its travel. This simple spring / stop prevents…
Simple screw covers for HiTechPet dog doors. Often one breaks these when removing the door for service, painting, etc. OnShape:…
WARNING : Mouse will not fit correctly without the 40° riser. A box for Logitech MX Ergo mouse with a 40° riser . All risers should have the same base shape, but I can't guarantee that lower angle risers will work. Features Protected in…
For the flat models, print flat-part down, Organic supports, supports on build plate only. For the Skadis models, print flat/skadis down, with either: Organic supports, supports on build plate only. I have an MK4s and set “Overhang…
This is a 3x2 beam bracket that allows Lego Technic arms and parts to change 90 degrees. It's useful for building Botball robots when a sensor needs to point down or some part needs to change directions on your model. It can be printed in…
This is a model of the Techno Trousers from Wallace and Gromit that I made with makerworld. This is the makerworld Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This project provides a custom mounting solution for upgrading the Monoprice Select Mini v2 3D printer with a BigTreeTech SKR Pico mainboard and a Raspberry Pi 3A(+). The SKR Pico can handle 12v and 24v, so I took the opportunity to…
Lego Technic 4198367 Axle Connector Double Flexible TPU replacement
This is made to mount the Bigtreetech Smart Filament Sensor to a 20X20 extrusion. The hole pattern for mounting the sensor allows the sensor to be mounted horizontal or vertical. I printed mine in PETG since this mounts outside the printer.
This Furitek Slidetech ESC has a cutout on the bottom for airflow and cooling…which is really helpful….except for when looking to double-sided tape mount it to the car. I created this simple mount that allows the ESC to sit off the bottom…
This is a stackable Gridfinity bin for the Peaktech 2025 multimeter. In the lower section there is enough storage space for all the accessories included with the multimeter. The bin fits the standard 42 mm grid and has a size of 5x3x10.…
This design adjusts the angle of the throttle quadrant 30 degrees to a more comfortable flatter angle. I designed it to match the angle of the throttles seen on airliners and other aircraft. For easier storage it is printed in multiple…
Print settings: nozzle: 0.4mm layer hight: 0.2mm supports: none Adapter: infill: 20% infill pattern: Adaptive Cubic perimeters: 2 brim: optional (I didn't use it) Knobs: infill: 20% infill pattern: Adaptive Cubic perimeters: 2 P.S. For me…
A replacement for the Logitech shifter inspired by those irl katana shifters, a little scuffed since it's my first upload I used PETG and put regular supports under the hilt, which is what it's called. The supports came off as the shifter…
The Techie is a back cover with a built-in precision screwdriver holder, designed for the CMF Phone 2 Pro. The model should load into your slicer in the correct orientation. I printed it at .2mm layer height, 80% infill, tree supports,…
Die Ringe dienen, gedruckt in verschiedenen Farben, zur einfachen Kennzeichnung von Gasflaschen. Beispielsweise grün = voll, gelb = angebrochen, rot = leer. Die Ringe (ID 114 mm, AD 120 mm, H 5 mm) passen sowohl über die aufgesetzte…
This model is designed to take a USB C port for a detachable cable. A version is available with an opening for a regular USB port for the wireless dongle. Uses two M3 bolts as contacts, make sure your bolts are attracted to magnets and…
This is a lightweight mod for the Logitech M720 Triathlon. I measured a 30g difference on my mouse, and aftermarket feet make it feel even better but are not required. A bit of sanding may be required in the base's battery compartment.…
This is a replacement for the keyboard foot for a logitech k270 Printed quickly as .4 nozzle Prusa MK35 infill at 60% just in case more strength needed used Anycubic PLA+ Filament no supports
A longer arm to observe from a different angle. printed in two parts to minimise the need for supports. joined with m3 bolts and nuts.
Demo This design requires additional hardware! This design must be printed in TPU! Making the Brass Connector This shock mount replaces the plastic mic holder at the end of the PRO 35's provided mounting clip. In order to securely connect…
This is a thingy i made for my baby monitor as the kickstand busted off it. Print in place and snaps on. No Hardware needed. Fun little design project i hope someone else can use. PETG is what i used for all prototypes and final part.…
I've been carrying my M650 L mouse around in my backpack and didn't want it to get damaged. This housing sits in the backpack (with the mouse oriented on its side) and with the relief on the bottom it's easy to get a finger underneath to…
This is a remix of DavisSgt's zerømouse mod for the Logitech G102/203, which was initially inspired by optimumtech . DavisSgt's model will not fit if your G102/203 is the 2ⁿᵈ generation LIGHTSYNC version. You can verify by checking the…
These things are the most fragile part on the headphones. Hope this saves someone the $100 for the headband. I modelled the right one using Onshape and mirrored the left one. I got the best results printing it with tree support and brim…
Verbindungen, Adapter: Statikteile mit S-Riegel verbinden ft-Nuten und Federleisten einbauen ft-Rastachsen verwenden Erweiterungen des ft-Systems: Hohlwelle (hollow shaft) 10 mm mit Durchgang für ft-Achse 4 mm) einbauen, adaptieren…
DIY Mouse charging dock which works with any logitech mouse that is Powerplay comatible as it uses the two charging connectors on the bottom. Part list: 3D Printed parts: 1x Base 1x Coin 1x Body Electronics: 1x TP4056 usb-c board 2x ~5cm…
Technics SA-EH790/SB-DV290 Custom speaker grilles
The orignal case was huge for me, thats why I designed a much smaller one. As the filters are magnetic, I used 3 washers inside the model thats why the filters snap into the place. Just pause the print in a specified layer, and put in the…
This is a customizable mounting base designed for the Bigtreetech SKR 3 and SKR 3 EZ mainboards, using standard M3x6 screws. The goal of this file is to provide a simple, editable platform with properly aligned screw holes ideal for…
Bring a piece of computing history to your desk with this 3D printable STL model of an IBM Keyboard. This retro tech replica is perfect for enthusiasts looking to add a classic piece of computing nostalgia to their displays or workspace.…
INFO A quick and easy way to mount your Logitech C270 camera to your enclosure tent. I designed this camera mount to be used with the Aukuoy enclosure from Amazon. It should also work with any other enclosure using rods with an 8mm…
For aliexpress "4 bit WS2812 light bead module strip light bar full-color driving slide lamp development board module SCM" modules. Use Dupont cables as connectors and simple pin headers for chaining more than one module. Angled…
Two versions, v3 PLA/PETG-only version (left side and middle on first image), v4 with TPU gasket (right side on first image). Both are not perfect and need refinement, this is mainly for demonstration purposes. Print with contact faces…
I wasn't satisfied with the Logitech Saitek Throttle quadrant and wanted something that more closely simulated the experience of flying a Cessna 150/152. So, taking inspiration from other projects (including this one ) I set about…
OpenSCAD: Zubehör und Adapter auf fischertechnik (ft) Zum Aufbau von neuen Teilen oder Grundkörpern: - Nuten liegend und stehend, flach und als Vollrund - Federleisten - Rastachsaufnahmen - Hohlwelle: Antriebswelle für ft-kompatible…
Mod for Logitech G29 , G27 , G25 , or Driving Force GT pedals by replacing the stock potentiometers with Hall effect sensors for smoother, more precise input and zero wear over time. This printable bracket makes the conversion simple and…
Print material: PETG recommended Print settings: CR10-SE C920 Mount: 5 Perimeter walls, 4 bottom layers, 4 top layers, 25% infill Camera Antivibration top clamp: 9 Perimeter walls, 4 bottom layers, 4 top layers, 100% infill…
This was once planned but got cut for cost: https://x.com/BenDaviesOrg/status/782730180636835840
This is a model of a prototype made by Lego but never released. I saw a picture of the prototype on reddit: https://www.reddit.com/r/lego/comments/1eebuhz/prototype_technic_gears_including_an_unreleased/
UPDATED VERSION ON MY PROFILE Printed from PETG with supports. 8 magnets 5mm diameter 5mm height press fitted. I cleaned every hole with drill before pressing.
I have seen quite a few mounts for the HDMI5 from BigTreeTech designed for the Sovol SV08, however, most of the ones I have tried would prevent me from opening or closing the doors for my official Open Enclosure , or hung well below the…
Seilspanner, Gesamthöhe 10 mm, sehr fein einstellbar fischertechnik-kompatibel, Grundfläche 20 * 30 mm (5 mm breiter als ein BS30). Mit Hypozykloidgetriebe 1:56 zum Antrieb der Seiltrommel, nicht rückdrehbar. Gedacht z.B. für Angelschnur.…
It takes two M3 16mm screws to put it together (though you may be able to use the original C270 pin for the camera mount part) and slides onto the stock ender 3 frame. You only need to print the Stem and Arm (The bracket STL is just an…
Letters from Whitechapel is one of my favorite hidden movement board games, but re-reading the rules and setup can take its time. As I couldn't find a single organizer online, I designed this to play the game more frequently and let you…
This is a remix of the Billnis remix which is based on the EunchanPark's original model from 2020. I had to make the remix because none of the Amazon links work anymore and my best guess for an available LED ring did not fit the model. I…
Continuing to play around with Tech Deck obstacles. My countertop is quickly turning into a skatepark. Totally unintentional, but you have to test out your prints right? Glue AngleBarforBox onto box edges Depending on your printer, the…
I didn't have a screw driver long enough to attempt to use the same fastener that's on the shifter already, but it is a good enough friction fit where the concern for the knob coming off is minimal. Slight sanding needed to allow for a…
A set of five reinforced 3D-printable corner brackets designed for strong and precise 90° connections. Each bracket has a unique industrial design with ribs and oval holes for adjustable mounting. Features: Dimensions: 50×50×20 mm Wall…
This adapter (coupler) allows you to connect a Lego Technic 56x28 ZR Wheel (or any compatible Lego Technic wheel) to a TT DC gearbox motor (shaft Ø 5.4 mm). The design provides a secure friction fit, holding the wheel firmly in place…
Adaptador Corrector de Altura para Cabezal Geeetech i3 Pro Este es un adaptador de corrección de altura diseñado para la Geeetech i3 Pro , que baja todo el cabezal de impresión algunos milímetros. Su función es evitar que el cabezal quede…
Dual Business Card Engraving Jig – For Fiber Laser Setups Looking to engrave business cards more efficiently? This dual-position jig is the perfect solution for streamlining your workflow and achieving consistent, professional results.…
Technics Miniature Collection in the style of a dj setup, so I made this simple platform with angled supports
The coolie hat of my old Logitech X52 hotas broke just while I was landing my space ship. After being annoyed for some seconds I designed a printable replacement. Be warned - this repair is not for beginners. It includes small screws,…
This model is compatible with the lego system.
Have a spare Logitech C920 camera and want a printer camera for your Prusawire? This 3-part print replaces one of the bearing clips with a camera mount. This is compatible with Prusawire Beta 1 and Release 1, but you should reprint the…
