Furitek Slidetech ESC Mounting Plate
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.98 – €1.20 net (excluding VAT)
For file: Furitek Slidetech ESC Mount.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.09 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 18 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easier mounting for this ESC
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Furitek Slidetech ESC has a cutout on the bottom for airflow and cooling…which is really helpful….except for when looking to double-sided tape mount it to the car.
I created this simple mount that allows the ESC to sit off the bottom and have an air gap - but yet give a full mounting surface to the chassis.
Step 1: Put small strips of double-sided tape around the edges of the inside mount area. I actually wrapped mine up the wall to help hold the side of the ESC.
Step 2: Smush the ESC in.
Step 3: Mount the capacitor using double-sided tape
Step 4: Mount the whole assembly to the car.