Next Level Ebrake Handbrake and logitech shifter mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
support for USB Handbrake with the driving force shifter on the Next Level GT lite series* + others race sims.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 73
- Makes
- 1
- Views
- 2,132
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
Here is a modded mount plate for the Next Level series, it allows fitment of a USB “Chinese Version” Handbrake (e-Brake) and the driving force shifter together.
The factory plate does not allow both to go together without drilling random holes and running only 1 or 2 bolts. This plate fits both perfectly.
Fits the following models and may well fit multiple other manufacturers or race sims with the same mount setup.
You can choose the non-display version or the sim display mod version for tablets and phones to use apps like DashPanel / SimHub / SIM Dashboard. The display mod requires a m6 bolt at least 20mm
GT LI20mmTE PRO
GT LITE PLAYSTATION EDITION
F-GT LITE IRACING EDITION
GT LITE
F-GT LITE
This print is for RH Drive usage, IE shifter / E-brake is used with your Left Hand
The mount points are spot on for the driving force shifter and the Chinese brake (Example Link
THE IMPORTANT STUFF
- To reduce breakage, use a slicer that allows mods like Pruca slicer so you can add higher infill areas. You have to add additional strength to the mounting cylinder or it will break.
- Do not print in PLA it will just break.
- Use ABS + or stronger
- 45% min infill on all the project design and/+ additional on cylinder mount (don't forget the modifier) “See Below for my mod setting”
- Print the right one “LH or RH Drive”
- Most importantly, don't rush the print. takes me 12hrs with abs+ and slow start and mid-build speeds. “Ender 5 S1” Could do in half the time with a mod slicer tool like Sonicpad etc.
The file will also be suitable for a steel/alloy build.
Mounting shifter requires 2x 25mm m6 bolts
Mounting handbrake requires 4x 30mm m6 bolts with nuts and washers. Best to mount 2 upwards and 2 downwards
Please share your sliced files to help others….
Modifier for Ender 5 s1 in Pruca Slic3r example
