Counting matching models…
Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…
I create this alternative pedal plates for DC Simracing DC-3 pedals, bigger and softer than the original ones, giving the posibility to use it without shoes. I printed it on PLA but i'm sure that PETG it's better for this use. With PLA I…
A remix of Printojet's amazing design. Strong enough to be used without the front bar support with 2 sets of stiff springs. Bolt fork much stronger to cope with sudden joystick end-of travel bumps. Designed to have no flex with PLA <40%…
When installed on this adapter, the base will be angled at 7 degrees from the cockpit mounting plate. To lock the base in front, you will need M6x18 screws (I had them with washers), and M6x10 screws for the back (included with the base).…
FPV Race Motor “T-Motor F80” LED light. Fitted with a cut out for a simple LED control board. The logo is a multicolor print where the first layers are printed with a translucent material. After the function check, the housing is glued…
1/24th scale Racing Helmet - there are two .stl files one with visor up and one with visor down. Onshape file: https://cad.onshape.com/documents/a338247dbb3fcbb92cc01bab/w/68aeae6c376b97818ad860df/e/887f2afef2edd5a41da803e7
Racing helmet for your Dummy 13 figurine. Inspired by The STIG from Top Gear. Visor is printed separately and glued onto the main helmet. Helmet slips onto original dummy 13 head. IMPORTANT NOTE: This helmet size is designed to fit 150%…
6X3X2.5 mm bearing X4 Wire diameter 1.2mm, inner diameter 10mm, length 12mm Spring X1 Hose clamp X1 insert molding nut M3 5mm X3 M3 screw 10mm X3 zip tie 150mm X2
ARRMA 6S NOTORIOUS / KRATON / BIGROCK X ZDRACING TRUGGY 1:7 4WS 4WD RC CAR RC CAR PRINTED ARRMA X ZDRACING TRUGGY 1:7 4WS 4WD (4 WHEEL STEERING X CENTRAL DIFF) Ultra-high-performance 1/7 scale RC car, 3D printable, using standard ARRMA…
I recreated these shifters using photos and datasheets provided by Cosworth. They originally are part of the entire CCW MK3 wheel design, but as that won't be finished for some time, I decided to release them as a standalone design so…
Version 2 - 100% printable racing wheel for the PS5 controller. Now with tilt-table mount and larger steering angle Xbox Version Available Here: PS4 Version Available Here: Nintendo Switch Version Available Here: Slide your controller in…
A brim is recommended for adhesion. Designed for printing with PETG. Due to the locking caps, please note that removal from the harness will break the clips off and they will need to be printed again if removed.
What is the Squideck? Squideck is a 12-button keyboard-style button box that can be used with OBS, in games, and as a sim racing button box. The device uses an RP2040 Zero, 12 Cherry MX profile keys, and Kailh hot-swap sockets, all…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
[Work in progress] Experience racing games on a whole new level with our open-source racing seat! This self-built seat, perfect for VR gaming, offers an immersive and user-adapted driving experience. What's still missing : Pedal housing:…
Own a piece of automotive racing history with this 3D printable STL model of the Jaguar X13. This classic racing prototype model is perfect for motorsport enthusiasts and collectors of legendary automotive designs, showcasing a unique and…
Capture the thrilling world of GT3 racing with this 3D printable STL model of the Mercedes-Benz AMG GT3 Evo. This powerful GT3 racing car model is perfect for motorsport enthusiasts and sim racers looking to display the aerodynamic…
Fuerte bandeja para ratón, muy estable. Relleno del 20%. Medida agujeros 6mm. Perfecta para cualquier perfilería de Aluminio. Sin Soportes. Es mi primer diseño, se agradece cualquiera opinión de mejora, Gracias.
****************** Long Shaft Servo Discontinued ****************** The long shaft servo was discontinued :(. I removed the alpha 0.1 printable mount for the short shaft motor as it didn't work. I'm working on a new mount that shifts the…
Looking for a place to store your glove or other items when not racing? This is a ventilated box designed to mount into aluminum profiling. Only 1 set of holes needed, but there are 2 sets, each 40mm away from each other height wise.…
In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…
Here’s my marble racing project featuring a motorized elevator and a modular track. The build isn’t fully complete yet — some support pillars are still missing. The motor mount is designed for a 130 micro motor, which will need a small DC…
Mounting bracket for simracing to isolate vibrations. Print inside from TPU. M8 screw hole in the middle.
Passe cable 1/4 de tour ajusté pour profilé rainure 8mm 3 tailles S, M ou L S et M avec entaille 3mm, L avec entaille 4mm PETG ou PLA, 3 périmètres 30% remplissage, pas de bordure ni support Bonus ; une petite boite qui tient sans vis…
This mount helps to mount a Corsair Xeneon Edge display to a Moza wheelbase to use it as a dash for simracing. Requires 2x M3x10mm and 2x 10mm 1/4"x20 bolts (AV standard) to secure. The dovetail design allows for removal of the dash when…
-Requires about 6 to 7 rolls of filament with 6 walls print settings for strength. -BUILT FOR MOZA SETUPS, I measured with my r5 wheel hub and SRP-Lite pedals so you may need to double check or modify the design to work with other setups.…
F1 Red Bull Racing RB8 2012 Wall Art Silhouette model. Adjustable size. I acept model suggestions.
This is a remix of the V5.8 accelerator pedal by Lebois to make a clutch with an adjustable regressive (over-cam) feel to allow an adjustable bite point. The base is the hall sensor version from one of my other remixes and this one has a…
The original HPI Racing mini kahuna monster truck battery (Plazma 7.4v 800mah 2S 35c Lipo) is very small (48.5x24.5x19mm) and the battery compartment is tight around that HPI battery so its impossible to use any other small Lipo in that…
Brakes for your office chair to put under the wheels so you don't slide away whilst sim racing. Glue some kind of rubber mat on the underside of the print so it grips the floor better. You want to print at least to of these for the chair…
Sim Racing Belt Tensioner rollers for a 2" harness to be mounted on an aluminum extrusion crossbar. This is used in cases where a tower is used to tune the angle of the belts to be optimal. Printed in PLA without issues but PETG may be a…
CAD features + Footprint: Cutouts on the front and back for fingers, to make it easier to grab the gloves Small spring effect keeps gloves nicely in place Tiny edge blends to compensate for elephant's foot Designed to print in the strong…
I really liked the Joker canopy on my analog whoops so i remixed them. New versions for the HDzero Eco and HDzero Lux cam. Lightweigt , Eco version printed in tpu95A is 0,7 gr the lux version is a little bit more. Adjustable angles ,…
Been using this for a while now. Printed them out of ABS. Sure there are other ways to mount this but this worked fine for me. I've made them this tall so a power strip can still be mounted underneath the rig. Hardware needed per mount:…
Front sprocket protector specifically designed for a 2013 tm racing enduro 125cc 2 stroke bike, printed with 100% infill. the logo does look kinda ugly tbh, if anyone wants one with no logo i can send it to you.
Diese Adapter verschließen die Endrohre der RS22 Schalldämpfer
🔁 Compatibility The 3D prints can be used on any Logitech G29 , Logitech G920 and Logitech G923 . The only print that's specific to a Logitech variant, is the lower bezel , which at the moment is available only for the G29, or PS4/PS5…
This is a 3D printable “95” racing-style desk prop designed for tool-less, glue-free assembly . Each number has a built-in notch that slides securely into a matching cavity on the baseplate, creating a stable press-fit connection without…
I created that for Govee RGB Light Bar ambient lighting effect, you need to create 2 arms. I used M5x16 for the connection of the parts. You can change that what you have in your hand. You will also need double sided tape to connect the…
I have used this adapter in order to mount wheel with bolt pattern 6x74mm to Fanatec podium hub which has bolt pattern 6x70. Print settings: 4 wall 5 bottom and top layers 40% infill PLA You will also need M5 rutex inserts (Nardi to…
This planter in the shape of a fuel canister has been designed with a practical and stylized approach, ideal for adding an original touch to decor through 3D printing. The model was created as a functional decorative object, intended for…
This is a two sided tracing board for kids to learn how to write letters and numbers. I put a lot of thought into the font. Letters and numbers are at slightly different depths, so you can create a multi color print by adding color…
Made for a starter panel originally designed for cars, but with a little handy skill, you can also make it for your racing setup, or to power your PC or multiple devices. I bought the panel on Aliexpress for €10, which is a pretty good…
Note: after using it a while I decided it needed a bit more resistance when shifting and just stuck another magnet on the magnets in the cups. Flash the Arduino following the instructions provided by SimHub. SimHub Arduino setup -…
Shifter paddles for the excellent AMG GT3 steering wheel project by Turn Racing https://www.printables.com/model/337686-turn-amg-gt3-diy-sim-racing-wheel This includes the Up and Down text as a two colour print. There are also single…
Moulds and Moulding stand for the Turn Racing 488 Challenge Project Create moulded polyurathane moulds with these models. This includes a moulding stand which you can mount your plate and moulds to while you cast them. You'll need to…
Moulds and Moulding stand for the Turn Racing AMG GT3 Project Create moulded polyurathane moulds with these models. This includes a moulding stand which you can mount your plate and moulds to while you cast them. You'll need to attach the…
If you are Canadian you might have an old hockey stick & a skateboard in your garage haha. The photo is actually my version 2 and it is what I'm using right now. I will print and upload V3 when time come. The print is solid and easy to…
Transport case for Turbo Racing 1/76 models The case is designed for one transmitter and 1-3 cars, power bank, charging supplies and small spare parts 3MF ready for printing on Prusa MK4 with MMU3 Or STL files for printing on other machines
This is a paddle rising bracket that I designed to raise my paddle plate on my sim rig. The holes on this design are m8. You will need a total of 2 left and 2 right for the 4 corners. The max angle this design could provide is ~ 7…
I made these side latch things for my Simlab P1X Pro to connect a six-point harness. Also made groin area latches that are a separate download. Advise printing these so that the loop is parallel to the printing bed to withstand most…
I made these under side latch things for my Simlab P1X Pro to connect a six-point harness – these are the groin area latches. Advise printing these so that the loop is parallel to the printing bed to withstand most force. Requires M8…
1 Satz Reifen in LH / RH Version mit Profil und schärferen Kanten als die originalen. Gedruckt in einem TPE 83Shore A konnte ich den Grip deutlich verbessern. Viel Spaß beim Drucken und Basteln. Wenn Euch der Remix gefällt würde ich mich…
Magnetic Shifter Mod This model is a magnetic shifter mod for the MOZA Racing ESX Steering Wheel. The mod will improve your shifting feel. It will feel shorter, more direct, and more aggressive. You can print it without any special…
Pretty simple VR controller holder I made. This is designed to go onto the shifter mount of my Next Level Racing WS 2.0, specifically on the shifter mount plate. The print has cavities for two embedded 0.315" Dia x 0.118" thk neodymium…
Based on the PDF dimension drawing from AP Racing Website. Converted to DWG, traced and modelled into 3D. Not exact, but meets the clearance dimensions required to confirm it fits. Caliper was printed with supports, Logo facing up.…
Here is my mount for the Lian Li 8.8" Secondary Screen. It is designed to fit the Asetek Front Mount, it is press fit, and the monitor being an all metal design means that the weight of it keeps it in place I have shown the longer version…
Cover for tuner/open end style heptagon lugnuts. Specifically for Megan Racing but could work for other heptagon style lugnuts. Adjust depth as wanted. You will need to put these on after you install as the socket will not fit after…
This is a 3d model for the center cap of the OZ Cygnus wheel. No assembly required. Best printed in ASA. The cap is fixed to the wheel using a plastic ring and a metal screw. The ring should be CNC cut from stainless steel for better…
The Next Level Racing GTLite Junior does not include a shifter mount, and Next Level Racing does not sell any accessories to attach a shifter to this cockpit, so I decided to make one for my kids sim rig. The 2 upper clamps may be a tight…
A great Wall Art of a Embracing Couple. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-)
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THIS IS A 3D-PRINTED REPLICA / COSPLAY / DISPLAY HELMET. IT IS NOT SAFETY-RATED AND MUST NEVER BE USED FOR RIDING, RACING, OR ANY REAL-WORLD PROTECTIVE PURPOSES. SIZE / WEIGHT:…
🏎 Otto Racing Car – 3D Printable Chassis🏎 Transform your Otto robot into a mini autonomous racing car with obstacle detection and track-driving capabilities. This lightweight chassis, inspired by Formula racing cars, gives Otto a…
Standard size (width, offset) RC Rally rim. Print with PETG 100% infill. More RC rally stuff at EmbieRacing.com
Mouse pad used for aluminum extrusion/profile sim rigs
This is a custom-designed wall mount specifically engineered for large-scale Lego Technic Formula 1 models (such as the 1:8 or 1:10 scales). The goal was to create a secure, almost invisible solution that showcases the car's silhouette…
I am glad to present you a keychain in the form of an American Racing Torq disc! The model is made in sizes: 34x41x8 mm. The model is fully ready for printing on your printer. Support, create and develop! - Рад презентовать вам брелок в…
My version of the body kit for MD24 from Meus Racing . You'll need four M1.4 x 5 mm screws and four M2 x 5 mm screws. The magnetic mount that comes with the frame is included (because once the magnets are in the mount, the whole thing…
a simple to print phone holder that works for an 40 series alluminium profile rig
This simple but highly effective system locks your office chair wheels in place without removing them. Just place the blocks under each wheel — the chair becomes instantly stable and won’t move, even under pressure.
Front shock tower for the ZD Racing / Dikavey BX12 RC car.
Please support the original by @Maybe_Prints if you have 50mm caster. I really liked the office chair chock until I noticed that it was too small for my office chair wheels. I made a variation of the original to suit the larger wheels.
-designed to be mounted on a 3mm plate -clearing on the underside for the mounting nut -knob will stop on the notch on the shaft to have enough clearing for button press -shaft needs to be shortened slightly -needs to be printed with…
You need one insert, 6 wide switch brackets (black and purple in the photo), and 2 narrow switch brackets (yellow in the photo). Parts: (8) Omron SS-5GL2 snap switches Arduino Nano ESP32 (18) M3x8 socket cap screws (18) M3 heat set…
a detailed racing car model with detailed wheels giving it a clean and agressive custom look optimized for 3d printing
The shifters are easy to build, work well and have a nice feel Assembly is quite simple and straightforward Magnets are pressfit inte the printed parts Screws go directly into the printed part except for the mounting were brass inserts…
Motus Catram - Light Racing Vehicle - Playmobil Compatibile (Inspired by Lotus Seven / Caterham Seven) 🏎 Motus Catram is a compact, dynamic, and iconic roadster inspired by the Lotus Seven and Caterham Seven, perfect for urban scenes,…
Instructions are as follows: Print the main chassis first. Trust me, you will have really messy supports otherwise. After printing both main chassis pieces, superglue them together. You can properly align them by squeezing the top/bottom…
Printed in PETG, with 4 wall loops, 5 bottom layers, 50% Gyroid infill, 0.2mm layer height. Ignore the texture difference in the bottom foot in the picture - it was printed with 2 types of PETG as I ran out mid-print Parts list: M6 T-nut…
GITHUB : https://github.com/vova641/SImracing # 🚗 Проект: Симрейсинг приборная панель (Dash) на ESP32-S3 и дисплее GC9A01 ## 📌 Общее описание проекта Разработана полноценная приборная панель для гоночных симуляторов (Assetto Corsa и…
High-Contrast Design: The bold pink color makes the letter cutouts pop, helping kids with visual tracking and letter identification. Built to Last: Made from a durable, rigid material that won't tear or crinkle like traditional paper…
Конечно. Вот готовое описание необходимых компонентов, инструментов и знаний для вашего проекта — чтобы его можно было опубликовать, отправить заказчику или просто чётко зафиксировать. --- ## 📋 Проект: Гоночный дисплей на Arduino +…
The Racing Sparrow RS Ranger is a 695mm long 3D printed radio controlled model yacht designed for smooth sailing and relaxed fun on the water. This affordable, easy-to-build boat is ideal for anyone looking for a simple and enjoyable…
The Racing Sparrow RS Footy is a 305mm long 3D printed radio controlled model sailboat designed for fun, simplicity, and low-cost sailing. Built around the popular Footy class, this compact boat is easy to print, quick to assemble, and…
Ridimensionare a piacimento sullo slicer. Il modello proposto è alto 20cm circa e va stampato così com'è senza supporti. Per una finitura più bella, ho usato un'altezza variabile dei livelli ed Layer height di 0.12mm. Per nascondere al…
A sequential adapter to turn the inexpensive USB shifter (can be found for $50-100 on Aliexpress or Amazon). To install: Move shifter to left (inbetween 1st gear and 2nd gear) Place Sequential Adapter in shift gate, between 3rd gear and…
2026.03.26 I've reworked this a bit. The straight dovetail mount loosened over time due to PLA creep (aka plastic deformation), so the latest version uses tapered dovetails. As it loosens it just sits a tiny bit lower in the mount. Also…
This is a SimHub compatible race flag in multiple variants to include/exclude an encoder as well as two mounting options. For the raceflag the following hardware bill of materials is required: 1x Arduino Nano 1x 8x8 DC5V WS2812B LED…
This is a retractable SimHub compatible race flag designed to be mounted behind a C49 Samsung ultra-wide monitor. The retraction mechanism - in this case - is controlled via HomeAssistant (ESPHome). For the raceflag the following BOM is…
![N-Works Sim racing rig [WIP]](https://media.printables.com/media/prints/78c0fa8d-5db6-476d-b1b7-3fedec33717e/images/10603080_86eba914-275b-42c1-96dd-c59e808dc6aa_5c113db5-b7f7-49a0-94db-689a5297d189/20250809_140705.jpg)
