1 / 19
SimHub raceflag for sim racing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Video Games
This is a SimHub compatible race flag in multiple variants to include/exclude an encoder as well as two mounting options.
For the raceflag the following hardware bill of materials is required:
- 1x Arduino Nano
- 1x 8x8 DC5V WS2812B LED Matrix
- 4x M3x20mm screws to mount the back plate
- 2x M3x8mm screws to hold down the Arduino Nano
You can mix the front and back plates however you like. There are two variants for the Front-Plate
- Frontplate with Encoder
- Frontplate without Encoder
and two variants for the backplate
- Backplate for Extrusion Rig (tested with SimLab p1x)
- Backplate to 4 simple screw-holes
Check out the SimHub Wiki on how to set up and wire the WS2812B LED Matrix and the encoder.
In case you like crazy, over-engineered raceflags also consider the retractable raceflag variant of this design.