SimHub raceflag for sim racing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiple variants of a race flag for sim racing - designed for popular SimHub hardware.
- Ocena
- 0 / 5
- Polubienia
- 10
- Wydruki
- 0
- Wyświetlenia
- 623
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
This is a SimHub compatible race flag in multiple variants to include/exclude an encoder as well as two mounting options.
For the raceflag the following hardware bill of materials is required:
- 1x Arduino Nano
- 1x 8x8 DC5V WS2812B LED Matrix
- 4x M3x20mm screws to mount the back plate
- 2x M3x8mm screws to hold down the Arduino Nano
You can mix the front and back plates however you like. There are two variants for the Front-Plate
- Frontplate with Encoder
- Frontplate without Encoder
and two variants for the backplate
- Backplate for Extrusion Rig (tested with SimLab p1x)
- Backplate to 4 simple screw-holes
Check out the SimHub Wiki on how to set up and wire the WS2812B LED Matrix and the encoder.
In case you like crazy, over-engineered raceflags also consider the retractable raceflag variant of this design.