Magnetic Paddle Shifters for Sim Racing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heres my design of Magnetic Paddle Shifters for Sim Racing
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 32
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
The shifters are easy to build, work well and have a nice feel
Assembly is quite simple and straightforward
Magnets are pressfit inte the printed parts
Screws go directly into the printed part except for the mounting were brass inserts are used
Printed parts for 2 Shifters:
2 x Shifter base - supports needed - supports are already set up in the .3mf file
2x Levers - can be printed without supports
Hardware needed for 2 Shifters
6x M3x5 Heatseat insert
4x M4x10 Countersunk screw
4x M2x12 Sockethead screw
6x M3x10 Sockethead screw
2x Microswitch
4x 15x3 neodym Magnet
Assembly
clean up the printed parts - remove the supports from the shifter base
put in the heat set inserts into the shifter base
press in the magnets, watch for correct orientation, they need to attach
put the lever in the shifter base and screw the M4x10 i, dont overthighten the leverver needs to move freely
solder wires to the microswitches or use crimp contacts
secure the microswitch on the shifterbase with the M2 screws
done